Generating daily high spatial land surface temperatures by combining ASTER and MODIS land surface temperature products for environmental process monitoring

2015 ◽  
Vol 17 (8) ◽  
pp. 1396-1404 ◽  
Author(s):  
Mingquan Wu ◽  
Hua Li ◽  
Wenjiang Huang ◽  
Zheng Niu ◽  
Changyao Wang
Keyword(s):  
Surface Temperature ◽  
Process Monitoring ◽  
Land Surface Temperature ◽  
Land Surface ◽  
Modis Land Surface Temperature ◽  
Surface Temperatures ◽  
Land Surface Temperatures ◽  
Environmental Process

Daily high spatial land surface temperatures for environmental process monitoring were generated by fusion of ASTER and MODIS LST products.

scholarly journals Urban Irrigation Suppresses Land Surface Temperature and Changes the Hydrologic Regime in Semi-Arid Regions

Water ◽  
2018 ◽  
Vol 10 (11) ◽  
pp. 1563 ◽  
Author(s):  
Bryant Reyes ◽  
Terri Hogue ◽  
Reed Maxwell
Keyword(s):  
Surface Temperature ◽  
Water Use ◽  
Land Surface Temperature ◽  
Land Surface ◽  
Remotely Sensed ◽  
Hydrologic Model ◽  
Hydrologic Regime ◽  
Surface Temperatures ◽  
Land Surface Temperatures ◽  
Semi Arid

Outdoor water use for irrigation constitutes a substantial urban water flux yet its impact on the land surface remains poorly quantified. This study analyzes the impact of irrigation on land surface temperatures and the hydrologic regime of a large, semi-arid urban metropolis. Using remotely sensed products, municipal water use data, and simulations with a coupled land surface-hydrologic model we find significant impacts on both land surface temperatures and the hydrologic dynamics of the study domain, Los Angeles, CA. The analysis of remotely sensed land surface temperature finds a decrease of up to 3.2 ± 0.02 K between low and high irrigation areas of similar land cover. These temperature differences, caused by a human-induced flux, are on par with estimates of the urban heat island effect and regional warming trends; simulations are able to capture this difference but underestimate absolute values throughout. Assessment of change in irrigation volume and timing through simulations show that irrigation timing has a small impact (<±2%) on evapotranspiration and runoff. Furthermore, relatively low irrigation volumes push the semi-arid urban environment into a sub-humid regime.

scholarly journals Evaluating the Variability of Urban Land Surface Temperatures Using Drone Observations

2019 ◽  
Vol 11 (14) ◽  
pp. 1722 ◽  
Author(s):  
Joseph Naughton ◽  
Walter McDonald
Keyword(s):  
Land Use ◽  
Surface Temperature ◽  
Environmental Health ◽  
Land Surface Temperature ◽  
Land Surface ◽  
Urban Land ◽  
Urban Environments ◽  
Surface Temperatures ◽  
Land Use Types ◽  
Land Surface Temperatures

Urbanization and climate change are driving increases in urban land surface temperatures that pose a threat to human and environmental health. To address this challenge, we must be able to observe land surface temperatures within spatially complex urban environments. However, many existing remote sensing studies are based upon satellite or aerial imagery that capture temperature at coarse resolutions that fail to capture the spatial complexities of urban land surfaces that can change at a sub-meter resolution. This study seeks to fill this gap by evaluating the spatial variability of land surface temperatures through drone thermal imagery captured at high-resolutions (13 cm). In this study, flights were conducted using a quadcopter drone and thermal camera at two case study locations in Milwaukee, Wisconsin and El Paso, Texas. Results indicate that land use types exhibit significant variability in their surface temperatures (3.9–15.8 °C) and that this variability is influenced by surface material properties, traffic, weather and urban geometry. Air temperature and solar radiation were statistically significant predictors of land surface temperature (R2 0.37–0.84) but the predictive power of the models was lower for land use types that were heavily impacted by pedestrian or vehicular traffic. The findings from this study ultimately elucidate factors that contribute to land surface temperature variability in the urban environment, which can be applied to develop better temperature mitigation practices to protect human and environmental health.

scholarly journals An ensemble of AMIP simulations with prescribed land surface temperatures

2018 ◽  
Author(s):  
Duncan Ackerley ◽  
Robin Chadwick ◽  
Dietmar Dommenget ◽  
Paola Petrelli
Keyword(s):  
Surface Temperature ◽  
Land Surface ◽  
General Circulation ◽  
Global Climate ◽  
General Circulation Models ◽  
Solar Constant ◽  
Surface Temperatures ◽  
Co2 Concentrations ◽  
Land Surface Temperatures ◽  
Intercomparison Project

Abstract. General circulation models (GCMs) are routinely run under Atmospheric Modelling Intercomparison Project (AMIP) conditions with prescribed sea surface temperatures (SSTs) and sea ice concentrations (SICs) from observations. These AMIP simulations are often used to evaluate the role of the land and/or atmosphere in causing the development of systematic errors in such GCMs. Extensions to the original AMIP experiment have also been developed to evaluate the response of the global climate to increased SSTs (prescribed) and carbon-dioxide (CO2) as part of the Cloud Feedback Model Intercomparison Project (CFMIP). None of these international modelling initiatives has undertaken a set of experiments where the land conditions are also prescribed, which is the focus of the work presented in this paper. Experiments are performed initially with freely varying land conditions (surface temperature and, soil temperature and mositure) under five different configurations (AMIP, AMIP with uniform 4 K added to SSTs, AMIP SST with quadrupled CO2, AMIP SST and quadrupled CO2 without the plant stomata response, and increasing the solar constant by 3.3 %). Then, the land surface temperatures from the free-land experiments are used to perform a set of “AMIP-prescribed land” (PL) simulations, which are evaluated against their free-land counterparts. The PL simulations agree well with the free-land experiments, which indicates that the land surface is prescribed in a way that is consistent with the original free-land configuration. Further experiments are also performed with different combinations of SSTs, CO2 concentrations, solar constant and land conditions. For example, SST and land conditions are used from the AMIP simulation with quadrupled CO2 in order to simulate the atmospheric response to increased CO2 concentrations without the surface temperature changing. The results of all these experiments have been made publicly available for further analysis. The main aims of this paper are to provide a description of the method used and an initial validation of these AMIP-prescribed land experiments.

Evaluating the potential of MODIS-LST for monitoring ground surface temperatures in the Maritime Antarctic (Barton Peninsula, King George Island, Antarctic). 

2021 ◽  
Author(s):  
Alejandro Corbea-Pérez ◽  
Gonçalo Vieira ◽  
Carmen Recondo ◽  
Joana Baptista ◽  
Javier F.Calleja ◽  
...  
Keyword(s):  
Surface Temperature ◽  
Land Surface Temperature ◽  
Land Surface ◽  
Ground Temperature ◽  
King George Island ◽  
Maritime Antarctic ◽  
In Situ Data ◽  
Surface Temperatures ◽  
Barton Peninsula

&lt;p&gt;Land surface temperature is an important factor for permafrost modelling as well as for understanding the dynamics of Antarctic terrestrial ecosystems (Bockheim et al. 2008). In the South Shetland Islands the distribution of permafrost is complex (Vieira et al. 2010) and the use of remote sensing data is essential since the installation and maintenance of an extensive network of ground-based stations are impossible. Therefore, it is important to evaluate the applicability of satellites and sensors by comparing data with in-situ observations. In this work, we present the results from the analysis of land surface temperatures from Barton Peninsula, an ice-free area in King George Island (South Shetlands). We have studied the period from March 1, 2019 to January 31, 2020 using data from the Moderate Resolution Imaging Spectroradiometer (MODIS) Land Surface Temperature (LST) and in-situ data from 6 ground temperature loggers. MOD11A1 and MYD11A1 products, from TERRA and AQUA satellites, respectively, were used, following the application of MODIS quality filters. Given the scarce number of high-quality data as defined by MODIS, all average LST with error &amp;#8804; 2K were included. Dates with surface temperature below -20&amp;#186;C, which are rare in the study area, and dates when the difference between MODIS and in-situ data exceeded 10&amp;#186;C were also examined. In both cases, those days on which MOD09GA/MYD09GA products showed cloud cover were eliminated. Eight in-situ ground temperature measurements per day were available, from which the one nearest to the time of satellite overpass was selected for comparison with MODIS-LST. The results obtained show a better correlation with daytime data than with nighttime data. Specifically, the best results are obtained with daytime data from AQUA (R&lt;sup&gt;2&lt;/sup&gt; between 0.55 and 0.81). With daytime data, correlation between MODIS-LST and in-situ data was verified with relative humidity (RH) values provided by King Sejong weather station, located in the study area. When RH is lower, the correlation between LST and in-situ data improves: we obtained correlation coefficients between 0.6 - 0.7 for TERRA data and 0.8 - 0.9 for AQUA data with RH values lower than 80%. The results suggest that MODIS can be used for temperature estimation in the ice-free areas of the Maritime Antarctic.&lt;/p&gt;&lt;p&gt;References:&lt;/p&gt;&lt;p&gt;Bockheim, J. G., Campbell, I. B., Guglielmin, M., and L&amp;#243;pez- Mart&amp;#305;nez, J.: Distribution of permafrost types and buried ice in ice free areas of Antarctica, in: 9th International Conference on Permafrost, 28 June&amp;#8211;3 July 2008, Proceedings, University of Alaska Press, Fairbanks, USA, 2008, 125&amp;#8211;130.&lt;/p&gt;&lt;p&gt;Vieira, G.; Bockheim, J.; Guglielmin, M.; Balks, M.; Abramov, A. A.; Boelhouwers, J.; Cannone, N.; Ganzert, L.; Gilichinsky, D. A.; Goryachkin, S.; L&amp;#243;pez-Mart&amp;#237;nez, J.; Meiklejohn, I.; Raffi, R.; Ramos, M.; Schaefer, C.; Serrano, E.; Simas, F.; Sletten, R.; Wagner, D. Thermal State of Permafrost and Active-layer Monitoring in the Antarctic: Advances During the International Polar Year 2007-2009. Permafr. Periglac. Process. 2010, 21, 182&amp;#8211;197.&lt;/p&gt;&lt;p&gt;&amp;#160;&lt;/p&gt;&lt;p&gt;Acknowledgements&lt;/p&gt;&lt;p&gt;This work was made possible by an internship at the IGOT, University of Lisbon, Portugal, funded by the Principality of Asturias (code EB20-16).&lt;/p&gt;&lt;p&gt;&amp;#160;&lt;/p&gt;

scholarly journals Validation of Collection 6 MODIS land surface temperature product using in situ measurements

2019 ◽  
Vol 225 ◽  
pp. 16-29 ◽  
Author(s):  
Si-Bo Duan ◽  
Zhao-Liang Li ◽  
Hua Li ◽  
Frank-M. Göttsche ◽  
Hua Wu ◽  
...  
Keyword(s):  
Surface Temperature ◽  
Land Surface Temperature ◽  
Land Surface ◽  
In Situ Measurements ◽  
Modis Land Surface Temperature
Sign in / Sign up

Export Citation Format

Share Document