scholarly journals Carbon nanotube anions for the preparation of gold nanoparticle–nanocarbon hybrids

2016 ◽  
Vol 52 (9) ◽  
pp. 1934-1937 ◽  
Author(s):  
Mustafa K. Bayazit ◽  
Stephen A. Hodge ◽  
Adam J. Clancy ◽  
Robert Menzel ◽  
Shu Chen ◽  
...  

This methodology highlights the unusual chemistry of negatively charged carbon nanotubes and provides a blueprint for the generation of hybrid nanomaterials.

2003 ◽  
Vol 772 ◽  
Author(s):  
Masakazu Muroyama ◽  
Kazuto Kimura ◽  
Takao Yagi ◽  
Ichiro Saito

AbstractA carbon nanotube triode using Helicon Plasma-enhanced CVD with electroplated NiCo catalyst has been successfully fabricated. Isolated NiCo based metal catalyst was deposited at the bottom of the cathode wells by electroplating methods to control the density of carbon nanotubes and also reduce the activation energy of its growth. Helicon Plasma-enhanced CVD (HPECVD) has been used to deposit nanotubes at 400°C. Vertically aligned carbon nanotubes were then grown selectively on the electroplated Ni catalyst. Field emission measurements were performed with a triode structure. At a cathode to anode gap of 1.1mm, the turn on voltage for the gate was 170V.


2021 ◽  
Author(s):  
Manasi Doshi ◽  
Eric Paul Fahrenthold

Explosives and hazardous gas sensing using carbon nanotube (CNT) based sensors has been a focus of considerable experimental research. The simplest sensors have employed a chemiresistive sensing mechanism, and rely...


Author(s):  
Mohammad Hamza Kirmani ◽  
Geeta Sachdeva ◽  
Ravindra Pandey ◽  
Gregory M. Odegard ◽  
Richard Liang ◽  
...  

2007 ◽  
Vol 124-126 ◽  
pp. 1309-1312
Author(s):  
Nguyen Duc Hoa ◽  
Nguyen Van Quy ◽  
Gyu Seok Choi ◽  
You Suk Cho ◽  
Se Young Jeong ◽  
...  

A new type of gas sensor was realized by directly depositing carbon nanotube on nano channels of the anodic alumina oxide (AAO) fabricated on p-type silicon substrate. The carbon nanotubes were synthesized by thermal chemical vapor deposition at a very high temperature of 1200 oC to improve the crystallinity. The device fabrication process was also developed. The contact of carbon nanotubes and p-type Si substrate showed a Schottky behavior, and the Schottky barrier height increased with exposure to gases while the overall conductivity decreased. The sensors showed fast response and recovery to ammonia gas upon the filling (400 mTorr) and evacuation.


RSC Advances ◽  
2021 ◽  
Vol 11 (40) ◽  
pp. 24772-24786
Author(s):  
Sveta Zhiraslanovna Ozkan ◽  
Galina Petrovna Karpacheva ◽  
Mikhail Nikolaevich Efimov ◽  
Andrey Aleksandrovich Vasilev ◽  
Dmitriy Gennad'evich Muratov ◽  
...  

In a self-organizing system within one stage under IR heating conditions, hybrid nanomaterials are formed with a structure that contains bimetallic Co–Fe particles, free or immobilized on the SWCNT surface, dispersed in the polymer PDPA matrix.


Author(s):  
Kang-Jia Wang ◽  
Guo-Dong Wang

This article mainly studies the vibration of the carbon nanotubes embedded in elastic medium. A new novel method called the Hamiltonian-based method is applied to determine the frequency property of the nonlinear vibration. Finally, the effectiveness and reliability of the proposed method is verified through the numerical results. The obtained results in this work are expected to be helpful for the study of the nonlinear vibration.


Author(s):  
María Pilar de Lara-Castells ◽  
Alexander O. Mitrushchenkov

A new nuclear spin and spatial symmetry-adapted full quantum method for light fermionic and bosonic particles under cylindrical carbon nanotube confinement.


Sign in / Sign up

Export Citation Format

Share Document