Strong hydrophobizer: laterally chemisorbed low-molecular-weight polydimethylsiloxane

2015 ◽  
Vol 51 (27) ◽  
pp. 5844-5847 ◽  
Author(s):  
Soo Sang Chae ◽  
Jin Young Oh ◽  
Jee Ho Park ◽  
Won Jin Choi ◽  
Jeong Hwan Han ◽  
...  
Keyword(s):  
Molecular Weight ◽  
Chemical Stability ◽  
Low Molecular Weight ◽  
Siloxane Chain ◽  
Thermal And Chemical Stability

We introduce a siloxane chain-based hydrophobizer that exhibits superior thermal and chemical stability compared to the conventional hydrophobizing silane agent under conditions of over 300 °C and pH 2–13.

Effect of Various Curing Agents On the Chemical Stability of Epoxy Resins

CORROSION ◽  
1961 ◽  
Vol 17 (1) ◽  
pp. 11t-20t ◽  
Author(s):  
RONALD L. DeHOFF
Keyword(s):  
Molecular Weight ◽  
Chemical Stability ◽  
Epoxy Resins ◽  
Room Temperature ◽  
Low Molecular Weight ◽  
Curing Agent ◽  
Corrosion Prevention ◽  
Curing Agents ◽  
Outdoor Weathering ◽  
Better Than

Abstract The epoxy resins most widely used in corrosion prevention are liquids of low molecular weight which can be converted to hard, tough, chemically resistant polymers by the use of various curing agents. Unlike other thermosetting resins such as polyesters, the curing agents may produce chemical linkages in the final polymers that differ from those present in the uncured form. Hence, the properties of cured epoxy resins are likely dependent upon, and may even reflect the properties of the curing agent used. Some seven different epoxy resin systems were exposed to various chemical environments and evaluatd for changes in dimensional stability and flexural strengths over a six month period. From the data presented herein, only limited conclusions may be drawn. Heat cured systems fare better than room temperature cured systems in every case. Anhydride cured epoxy resins show greater resistance to outdoor weathering than amine cured systems. 5.4.5, 6.6.8

A high-performance oil-free backing pump for electron microscopes

1978 ◽  
Vol 36 (1) ◽  
pp. 110-111
Author(s):  
G.K.W. Balkau ◽  
E. Bez ◽  
J.L. Farrant
Keyword(s):  
Molecular Weight ◽  
Electron Microscope ◽  
Hot Spots ◽  
High Performance ◽  
Carbonaceous Material ◽  
Contamination Rate ◽  
Low Molecular Weight ◽  
Principal Source ◽  
Rotary Pumps ◽  
Electron Microscopes

The earliest account of the contamination of electron microscope specimens by the deposition of carbonaceous material during electron irradiation was published in 1947 by Watson who was then working in Canada. It was soon established that this carbonaceous material is formed from organic vapours, and it is now recognized that the principal source is the oil-sealed rotary pumps which provide the backing vacuum. It has been shown that the organic vapours consist of low molecular weight fragments of oil molecules which have been degraded at hot spots produced by friction between the vanes and the surfaces on which they slide. As satisfactory oil-free pumps are unavailable, it is standard electron microscope practice to reduce the partial pressure of organic vapours in the microscope in the vicinity of the specimen by using liquid-nitrogen cooled anti-contamination devices. Traps of this type are sufficient to reduce the contamination rate to about 0.1 Å per min, which is tolerable for many investigations.

Low-molecular-weight heparin in the prevention and treatment of thromboembolic disorders

1998 ◽  
Vol 1 (5) ◽  
pp. 166-174 ◽  
Author(s):  
Evelyn R Hermes De Santis ◽  
Betsy S Laumeister ◽  
Vidhu Bansal ◽  
Vandana Kataria ◽  
Preeti Loomba ◽  
...  
Keyword(s):  
Molecular Weight ◽  
Low Molecular Weight Heparin ◽  
Low Molecular Weight ◽  
Prevention And Treatment

Venous thromboembolism in a general hospital. An update with low molecular weight heparin prophylaxis

VASA ◽  
2007 ◽  
Vol 36 (1) ◽  
pp. 17-22
Author(s):  
Schulz ◽  
Kesselring ◽  
Seeberger ◽  
Andresen
Keyword(s):  
Molecular Weight ◽  
Pulmonary Embolism ◽  
Venous Thromboembolism ◽  
Low Molecular Weight ◽  
Trauma Patients ◽  
Vte Prophylaxis ◽  
Vein Thrombosis ◽  
Patients At Risk ◽  
Hospital Stays ◽  
Event Rates

Background: Patients admitted to hospital for surgery or acute medical illnesses have a high risk for venous thromboembolism (VTE). Today’s widespread use of low molecular weight heparins (LMWH) for VTE prophylaxis is supposed to have reduced VTE rates substantially. However, data concerning the overall effectiveness of LMWH prophylaxis is sparse. Patients and methods: We prospectively studied all patients with symptomatic and objectively confirmed VTE seen in our hospital over a three year period. Event rates in different wards were analysed and compared. VTE prophylaxis with Enoxaparin was given to all patients at risk during their hospital stay. Results: A total of 50 464 inpatients were treated during the study period. 461 examinations were carried out for symptoms suggestive of VTE and yielded 89 positive results in 85 patients. Seventy eight patients were found to have deep vein thrombosis, 7 had pulmonary embolism, and 4 had both deep venous thrombosis and pulmonary embolism. The overall in hospital VTE event rate was 0.17%. The rate decreased during the study period from 0.22 in year one to 0,16 in year two and 0.13 % in year three. It ranged highest in neurologic and trauma patients (0.32%) and lowest (0.08%) in gynecology-obstetrics. Conclusions: With a simple and strictly applied regimen of prophylaxis with LMWH the overall rate of symptomatic VTE was very low in our hospitalized patients. Beside LMWH prophylaxis, shortening hospital stays and substantial improvements in surgical and anasthesia techniques achieved during the last decades probably play an essential role in decreasing VTE rates.

Sign in / Sign up

Export Citation Format

Share Document