scholarly journals Tuning the pore size of ZnO nano-grids via time-dependent solvent annealing

2014 ◽  
Vol 2 (19) ◽  
pp. 6945-6951 ◽  
Author(s):  
Kuhu Sarkar ◽  
Christoph J. Schaffer ◽  
Daniel Moseguí González ◽  
Anna Naumann ◽  
Jan Perlich ◽  
...  

Via a block copolymer-assisted sol–gel synthesis route, zinc oxide (ZnO) thin films are obtained with a nanogrid-like morphology.

Optik ◽  
2018 ◽  
Vol 169 ◽  
pp. 303-313 ◽  
Author(s):  
Badis Rahal ◽  
Boubekeur Boudine ◽  
Youssef Larbah ◽  
Lakhdar Guerbous ◽  
Miloud Sebais ◽  
...  

2013 ◽  
Vol 667 ◽  
pp. 193-199 ◽  
Author(s):  
Mohd Firdaus Malek ◽  
Mohamad Hafiz Mamat ◽  
Mohamed Zahidi Musa ◽  
Mohd Zainizan Sahdan ◽  
Mohamad Rusop Mahmood

Recent research papers for zinc oxide (ZnO) thin films prepared by dip-coating method are reviewed. The aim is on the factors affecting the properties of ZnO thin films prepared by dip-coating method and the preparation of ZnO solution precursor using sol-gel process. Several of journals have been discovered to find out the related study on this topic. It was found that solution chemical equilibrium, substrate and thermal processing are the factors that contribute to the various properties of ZnO thin films. This review hopefully can help in improving the properties of ZnO thin film for possible applications to photoconductor, integrated sensor, transparent conducting oxide electrodes, optoelectronic devices and so on.


2019 ◽  
Vol 26 (03) ◽  
pp. 1850158 ◽  
Author(s):  
MARYAM MOTALLEBI AGHGONBAD ◽  
HASSAN SEDGHI

Zinc Oxide thin films were deposited on glass substrates by sol–gel spin coating method. Zinc acetate dihydrate, 2-methoxyethanol and monoethanolamine were used as precursor, solvent and stabilizer, respectively. Zinc acetate dihydrate was used with different molar concentrations of 0.15, 0.25 and 0.5 M. Optical properties of ZnO thin films such as dielectric constants, absorption coefficient, Urbach energy and optical band gap energy were calculated by spectroscopic ellipsometry (SE) method. The effect of zinc acetate concentration on optical properties of ZnO thin films is investigated. ZnO thin film with Zn concentration of 0.25 M had the highest optical band gap. Wemple DiDomenico oscillator model was used for calculation of the energy of effective dispersion oscillator, the dispersion energy, the high frequency dielectric constant, the long wavelength refractive index and the free carrier concentration.


2015 ◽  
Vol 1109 ◽  
pp. 568-571
Author(s):  
Shafura Karim ◽  
Uzer Mohd Noor ◽  
M.H. Mamat ◽  
Shuhaimi Abu Bakar ◽  
Salman A.H. Alrokayan ◽  
...  

Tin-doped Zinc Oxide (Sn-doped ZnO) thin films were prepared using zinc acetate dehydrate as a starting material by sol-gel immersion method. The doping concentrations were varied at 0 at.%, 1.0 at.%, 2.0 at.% and 3.0 at.%. The synthesized samples were characterized by Field Emission Scanning Electron Microscopy (FESEM).


1996 ◽  
Vol 288 (1-2) ◽  
pp. 112-115 ◽  
Author(s):  
M.N. Kamalasanan ◽  
Subhas Chandra

2015 ◽  
Vol 1125 ◽  
pp. 106-110 ◽  
Author(s):  
Ili Liyana Khairunnisa Kamardin ◽  
Ainun Rahmahwati Ainuddin

Zinc Oxide (ZnO) known as wide band gap semiconductor with large excitation energy 60 meV, noncentral symmetry, piezoelectric and biocompatible for biomedical application are the unique characteristic that attract many researcher’s attention on ZnO nanostructure synthesis and physical properties. ZnO thin films were deposited on Si Glass substrate by a sol-gel process. The starting solution were prepare by dissolved zinc acetate dehydrate (ZnAc) and diethanolamine (DEA) in water (H2O) and 2-propanol (2-PrOH). 0 to 60 drops of NaOH were dropped into 100 ml sol-gel solution to study effect of sol-gel modification. ZnO thin films were obtained after preheating the spin coated thin films at 100 °C for 10 minutes after each coating. The coated substrates were undergone for Hot Water Treatment (HWT) process at 90 °C for 6 hours to grow ZnO nanostructures. The effects of sol-gel modification by drop of NaOH into the solution were studied. ZnO nanorods and nanoflakes were obtained after hot water treated at 90 °C for 6 hours with different amount of NaOH dropped directly in the sol-gel solution. On the basis of the changes in morphology and microstructure induced by hot water treatment, it is concluded that the amount of NaOH dropped into sol-gel effected morphology of ZnO growth.


2006 ◽  
Vol 253 (4) ◽  
pp. 1758-1761 ◽  
Author(s):  
Chang Hyun Bae ◽  
Seung Min Park ◽  
Seung-Eon Ahn ◽  
Dong-Jin Oh ◽  
Gyu Tae Kim ◽  
...  

2012 ◽  
Author(s):  
S. Senthilvelan ◽  
V. L. Chandraboss ◽  
B. Karthikeyan ◽  
M. Murugavelu ◽  
B. Loganathan ◽  
...  

2012 ◽  
Vol 22 ◽  
pp. s110-s114 ◽  
Author(s):  
Dong XU ◽  
Bin JIANG ◽  
Lei JIAO ◽  
Feng-dan CUI ◽  
Hong-xing XU ◽  
...  

2011 ◽  
Vol 158 (2) ◽  
pp. H85 ◽  
Author(s):  
Gururaj V. Naik ◽  
Navakanta Bhat

Sign in / Sign up

Export Citation Format

Share Document