Neuron-like polyelectrolyte–carbon nanotube composites for ultra-high loading of metal nanoparticles

2014 ◽  
Vol 38 (10) ◽  
pp. 4799-4806 ◽  
Author(s):  
Md. Shahinul Islam ◽  
Won San Choi ◽  
Tae Sung Bae ◽  
Young Boo Lee ◽  
Ha-Jin Lee
Keyword(s):  
Carbon Nanotubes ◽  
Carbon Nanotube ◽  
Metal Nanoparticles ◽  
Multiwalled Carbon Nanotubes ◽  
High Loading ◽  
Multiwalled Carbon ◽  
Simple Protocol ◽  
Nanotube Composites ◽  
Carbon Nanotube Composites

We report a simple protocol for the fabrication of multiwalled carbon nanotubes (MWCNTs) with a neuron-like structure for loading ultra-high densities of metal nanoparticles (NPs).

Mechanical properties, wear behavior and crystallographic texture of Al–multiwalled carbon nanotube composites developed by powder metallurgy route

2016 ◽  
Vol 51 (8) ◽  
pp. 1099-1117 ◽  
Author(s):  
Lailesh Kumar ◽  
Syed Nasimul Alam ◽  
Santosh Kumar Sahoo
Keyword(s):  
Carbon Nanotubes ◽  
Carbon Nanotube ◽  
Multiwalled Carbon Nanotubes ◽  
Crystallographic Texture ◽  
Wear Behavior ◽  
Multiwalled Carbon Nanotube ◽  
Multiwalled Carbon ◽  
Nanotube Composites ◽  
Carbon Nanotube Composites ◽  
Al Matrix

Aluminum (Al)-based metal matrix composites reinforced with multiwalled carbon nanotubes were developed by powder metallurgy route. The Al and multiwalled carbon nanotubes powder mixtures were consolidated under a load of 565 MPa followed by sintering at 550℃ for 2 h in inert atmosphere. Al–1, 2, and 3 wt.% multiwalled carbon nanotube composites were developed. In the present study, the microstructure, mechanical properties, sliding wear behavior, and crystallographic texture of various Al–multiwalled carbon nanotube composites were investigated. The multiwalled carbon nanotubes produced by low-pressure chemical vapor deposition technique and the various sintered composites were characterized using scanning electron microscope, high-resolution transmission electron microscope, X-ray diffraction, differential scanning calorimetry and thermogravimetric analysis, Raman spectroscopy, and Fourier transform infrared spectroscopy. A significant improvement in relative density, Vickers microhardness, and wear resistance of the composites up to addition of 2 wt.% of multiwalled carbon nanotubes was observed. The deterioration in these properties beyond 2 wt.% of multiwalled carbon nanotubes was possibly due to the agglomeration of multiwalled carbon nanotubes in the Al matrix. The tensile strength of Al–multiwalled carbon nanotube composites continuously decreases with the addition of multiwalled carbon nanotubes. The decrease in tensile strength can be attributed to the detrimental effect of Al4C3 formed at the interface of the Al matrix and the multiwalled carbon nanotubes which will cause premature failure of the composite. The addition of multiwalled carbon nanotubes altered the crystallographic texture of the composites. The residual stresses in the various composites were found to be compressive in nature and also show improvement up to addition of 2 wt.% multiwalled carbon nanotubes in the Al matrix.

Azopolymer triggered electrophoretic deposition of MnO2-carbon nanotube composites and polypyrrole coated carbon nanotubes for supercapacitors

2015 ◽  
Vol 3 (32) ◽  
pp. 16486-16494 ◽  
Author(s):  
Yangshuai Liu ◽  
Kaiyuan Shi ◽  
Igor Zhitomirsky
Keyword(s):  
Carbon Nanotubes ◽  
Carbon Nanotube ◽  
Electrophoretic Deposition ◽  
Electrochemical Methods ◽  
Multiwalled Carbon Nanotube ◽  
Multiwalled Carbon ◽  
Nanotube Composites ◽  
Carbon Nanotube Composites ◽  
Coated Carbon

MnO2 nanofibers-multiwalled carbon nanotube composites and polypyrrole coated carbon nanotubes for supercapacitors were prepared by new chemical and electrochemical methods.

scholarly journals MECHANICAL PROPERTIES OF DISCONNECTED MULTIWALLED CARBON NANOTUBES AND CARBON NANOTUBE COMPOSITES - A REVIEW PAPER

2018 ◽  
Vol 6 (6) ◽  
pp. 212-225
Author(s):  
Elias Randjbaran ◽  
Rizal Zahari ◽  
Dayang L. Majid ◽  
Mohamed T. H. Sultan ◽  
Norkhairunnisa Mazlan
Keyword(s):  
Carbon Nanotubes ◽  
Carbon Nanotube ◽  
Young’S Modulus ◽  
Review Paper ◽  
Young's Modulus ◽  
Research Question ◽  
Multiwalled Carbon ◽  
Main Research ◽  
Nanotube Composites ◽  
Carbon Nanotube Composites

Motivation/Background: Current review paper is about the forecast of Young's modulus for carbon nanotubes, from both hypothetical and exploratory angles are introduced.  The disparities between the estimations of Young's modulus announced in the writing are broke down, and distinctive patterns of the outcomes are examined. Explain the importance of the problem investigated in the paper. Include here a statement of the main research question. Method: A whole investigation is performed to feature the obstructions and downsides of the demonstrating methods and crucial presumptions utilized which ought to be defeated in additionally contemplates. Conclusions: The perspectives that ought to be considered all the more precisely in demonstrating carbon nanotube composites are distinguished.

Absorption behavior of poly(methyl methacrylate)–multiwalled carbon nanotube composites: effects of UV irradiation

2017 ◽  
Vol 19 (10) ◽  
pp. 7359-7369 ◽  
Author(s):  
Je-Chuan Hsu ◽  
Wenxin Cao ◽  
Fuqian Yang ◽  
Tsong-Jen Yang ◽  
Sanboh Lee
Keyword(s):  
Carbon Nanotubes ◽  
Carbon Nanotube ◽  
Methyl Methacrylate ◽  
Uv Irradiation ◽  
Practical Importance ◽  
Multiwalled Carbon Nanotube ◽  
Multiwalled Carbon ◽  
Poly Methyl Methacrylate ◽  
Nanotube Composites ◽  
Carbon Nanotube Composites

Understanding the effects of carbon nanotubes (CNTs) and ultraviolet (UV) irradiation on solvent transport in polymers is of practical importance for the applications of polymer–CNT composites in electronics and photonics.

Role of rheology in tunning thermal conductivity of polyamide 12/polyamide 6 composites with a segregated multiwalled carbon nanotube network

2017 ◽  
Vol 52 (18) ◽  
pp. 2549-2557 ◽  
Author(s):  
Laura Arboleda-Clemente ◽  
Xoán García-Fonte ◽  
María-José Abad ◽  
Ana Ares-Pernas
Keyword(s):  
Thermal Conductivity ◽  
Carbon Nanotubes ◽  
Carbon Nanotube ◽  
Thermal Diffusivity ◽  
Multiwalled Carbon Nanotubes ◽  
Polyamide 6 ◽  
Multiwalled Carbon ◽  
Polyamide 12 ◽  
Nanotube Composites ◽  
Carbon Nanotube Network

Effect of multiwalled carbon nanotubes in thermal conductivity of an immiscible blend of polyamides, 50/50 (wt%/wt%) polyamide 12/polyamide 6, was analyzed as function of nanofiller amount and temperature. Effect of the molding temperature in the structure of conductive network was investigated by rheology. Data show that 5 vol% multiwalled carbon nanotubes caused an increase of 41% in thermal diffusivity and 78% in thermal conductivity respect to polyamide blend values. Thermal conductivity improvement could be described by percolation theory, with a low threshold composition (φc = 0.09 vol% carbon nanotube). Fitting parameters obtained from Agari’s adjustment model show that polyamides structure is not affected by carbon nanotubes and the nanofillers can easily form conductive paths in the polyamide 12/polyamide 6 matrix. The temperature increase facilitates nanofiller dispersion causing the formation of a denser carbon nanotube network and rising the thermal diffusivity of carbon nanotube composites with low percolation level, as was proved on annealed samples at 255℃.

Preparation and Characterization of Poly(ε-Caprolactone)-Grafted-Multiwalled Carbon Nanotubes

2007 ◽  
Vol 334-335 ◽  
pp. 873-876
Author(s):  
Hun Sik Kim ◽  
Yun Seok Chae ◽  
Hyoung Joon Jin ◽  
Jin San Yoon
Keyword(s):  
Carbon Nanotubes ◽  
Multiwalled Carbon Nanotubes ◽  
Ring Opening ◽  
Hydroxyl Groups ◽  
Multiwalled Carbon ◽  
Solvent Cast ◽  
Before And After ◽  
Nanotube Composites ◽  
Carbon Nanotube Composites

Sheets of poly(ε-caprolactone) (PCL)/carbon nanotube composites were prepared through the solvent cast method. Multiwalled carbon nanotubes (MWCNT) functionalized with hydroxyl groups were used as an initiator for the ring opening polymerization of ε-caprolactone to introduce PCL chains to the surface of MWCNT in order to ameliorate the dispersion of MWCNT in PCL matrix. Grafting of PCL chains to MWCNT was followed by FTIR and TEM observations. Effect of the incorporation of MWCNT on the mechanical properties of PCL was explored before and after the modification of the MWCNT by the PCL grafting.

Fast Preparation of Hydroxyapatite/Superhydrophilic Vertically Aligned Multiwalled Carbon Nanotube Composites for Bioactive Application

Langmuir ◽  
2010 ◽  
Vol 26 (23) ◽  
pp. 18308-18314 ◽  
Author(s):  
Anderson O. Lobo ◽  
Marcus A. F. Corat ◽  
Sandra C. Ramos ◽  
Jorge T. Matsushima ◽  
Alessandro E. C. Granato ◽  
...  
Keyword(s):  
Carbon Nanotube ◽  
Multiwalled Carbon Nanotube ◽  
Multiwalled Carbon ◽  
Nanotube Composites ◽  
Vertically Aligned ◽  
Carbon Nanotube Composites
Sign in / Sign up

Export Citation Format

Share Document