Effects of kinetic and transport phenomena on thermal explosion and oscillatory behaviour in a spherical reactor with mixed convection

2014 ◽  
Vol 16 (42) ◽  
pp. 23365-23378 ◽  
Author(s):  
Filipa Gonçalves de Azevedo ◽  
John F. Griffiths ◽  
Silvana S. S. Cardoso
Keyword(s):  
Natural Convection ◽  
Mixed Convection ◽  
Thermal Explosion ◽  
Transport Phenomena ◽  
Oscillatory Behaviour

Thermal explosion and oscillatory behaviour in the presence of coupled forced and natural convection in a spherical reactor.

Experimental and Numerical Study for Improved Understanding of Mixed-Convection Type of Flows in Turbine Casing Cavities During Shut-Down Regimes

2021 ◽  
Author(s):  
Oguzhan Murat ◽  
Budimir Rosic ◽  
Koichi Tanimoto ◽  
Ryo Egami
Keyword(s):  
Natural Convection ◽  
Flow Field ◽  
Mixed Convection ◽  
Gas Turbines ◽  
Operating Conditions ◽  
Scale Model ◽  
Unsteady Temperature ◽  
Numerical Predictions ◽  
Wide Range ◽  
Turbine Casing

Abstract Due to increase in the power generation from renewable sources, steam and gas turbines will be required to adapt for more flexible operations with frequent start-ups and shut-downs to provide load levelling capacity. During shut-down regimes, mixed convection takes place with natural convection dominance depending on the operating conditions in turbine cavities. Buoyant flows inside the turbine that are responsible for non-uniform cooling leading to thermal stresses and compromise clearances directly limits the operational flexibility. Computational fluid dynamics (CFD) tools are required to predict the flow field during these regimes since direct measurements are extremely difficult to conduct due to the harsh operating conditions. Natural convection with the presence of cross-flow -mixed convection has not been extensively studied to provide detailed measurements. Since the literature lacks of research on such flows with real engine representative operating conditions for CFD validation, the confidence in numerical predictions is rather inadequate. This paper presents a novel experimental facility that has been designed and commissioned to perform very accurate unsteady temperature and flow field measurements in a simplified turbine casing geometry. The facility is capable of reproducing a wide range of Richardson, Grashof and Reynolds numbers which are representative of engine realistic operating conditions. In addition, high fidelity, wall resolved LES with dynamic Smagorinsky subgrid scale model has been performed. The flow field as well as heat transfer characteristics have been accurately captured with LES. Lastly, inadequacy of RANS for mixed type of flows has been highlighted.

Fundamentals of forced and mixed convection and transport phenomena

1994 ◽  
Vol 47 (4) ◽  
pp. 379-380
Author(s):  
Ramiz F. Babus'Haq ◽  
S.Douglas Probert
Keyword(s):  
Mixed Convection ◽  
Transport Phenomena

Mixed Convection in Air in an Open Ended Cavity With a Moving Plate Parallel to the Cavity Open Surface

2005 ◽  
Author(s):  
Assunta Andreozzi ◽  
Nicola Bianco ◽  
Vincenzo Naso ◽  
Oronzio Manca
Keyword(s):  
Heat Flux ◽  
Natural Convection ◽  
Mixed Convection ◽  
Plate Motion ◽  
Uniform Heat Flux ◽  
Geometrical Parameters ◽  
Heated Plate ◽  
Open Surface ◽  
Moving Plate ◽  
Plate Temperature

In this study, a numerical investigation of mixed convection in air in an open ended cavity, with a moving plate parallel to the cavity open surface, is carried out. The moving plate has a constant velocity, whereas a vertical plate of the open cavity is heated at uniform heat flux. All the other walls are adiabatic. The numerical analysis is obtained by means of the commercial code FLUENT. Two configurations, assisting and opposing, are analyzed. In the assisting configuration, natural convection is supported by the plate motion, whereas, in the opposing configuration, natural convection and plate motion have opposing effects. The effect of different geometrical parameters, heat flux and moving plate velocity are analyzed. Results in terms of heated plate and moving plate temperature profiles are presented and simple monomial correlation equations for both the configurations are proposed between the terms Nu/Re0.6 and Ri.

scholarly journals The effect of external heat transfer on thermal explosion in a spherical vessel with natural convection

2015 ◽  
Vol 17 (26) ◽  
pp. 16894-16906 ◽  
Author(s):  
A. N. Campbell
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Thermal Explosion ◽  
Parameter Space ◽  
External Heat ◽  
Spherical Vessel ◽  
External Heat Transfer

Regions of parameter space where explosions occur are identified numerically for systems with varying intensities of natural convection and rates of external heat transfer.

Mixed Convection Heat Transfer From Thermal Sources Mounted on Horizontal and Vertical Surfaces

1990 ◽  
Vol 112 (4) ◽  
pp. 975-987 ◽  
Author(s):  
S. S. Tewari ◽  
Y. Jaluria
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Heat Source ◽  
Mixed Convection ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Finite Width ◽  
Heat Sources ◽  
Wide Range ◽  
Thermal Sources

An experimental study is carried out on the fundamental aspects of the conjugate, mixed convective heat transfer from two finite width heat sources, which are of negligible thickness, have a uniform heat flux input at the surface, and are located on a flat plate in the horizontal or the vertical orientation. The heat sources are wide in the transverse direction and, therefore, a two-dimensional flow circumstance is simulated. The mixed convection parameter is varied over a fairly wide range to include the buoyancy-dominated and the mixed convection regimes. The circumstances of pure natural convection are also investigated. The convective mechanisms have been studied in detail by measuring the surface temperatures and determining the heat transfer coefficients for the two heated strips, which represent isolated thermal sources. Experimental results indicate that a stronger upstream heat source causes an increase in the surface temperature of a relatively weaker heat source, located downstream, by reducing its convective heat transfer coefficient. The influence of the upstream source is found to be strongly dependent on the surface orientation, especially in the pure natural convection and the buoyancy dominated regimes. The two heat sources are found to be essentially independent of each other, in terms of thermal effects, at a separation distance of more than about three strip widths for both the orientations. The results obtained are relevant to many engineering applications, such as the cooling of electronic systems, positioning of heating elements in furnaces, and safety considerations in enclosure fires.

Sign in / Sign up

Export Citation Format

Share Document