A sequential solid phase microextraction system coupled with inductively coupled plasma mass spectrometry for speciation of inorganic arsenic

2014 ◽  
Vol 6 (12) ◽  
pp. 4205-4211 ◽  
Author(s):  
Peng Li ◽  
Xiao-qin Zhang ◽  
Yi-jun Chen ◽  
Hong-zhen Lian ◽  
Xin Hu

A sequential solid phase microextraction (SPME) system consisting of two monolithic capillary columns was developed for simultaneous separation and preconcentration of inorganic arsenic, followed by inductively coupled plasma mass spectrometry (ICP-MS) detection.

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Seon Hwa Lee ◽  
Seon-Jin Yang ◽  
Yonghoon Lee ◽  
Sang-Ho Nam

AbstractToxicity of arsenic compounds depends on the chemical structure as well as the concentration. Thus, separation of the toxic arsenic species should precede the quantification for the accurate toxicity assessment. Ion chromatography inductively coupled plasma mass spectrometry (IC-ICP-MS) has been the most popular method for separation and quantification of toxic arsenic species. However, the method requires complex instrument, elaborate sample preparation, and long analysis time. In this work, toxic inorganic arsenic species in water was separated by the simple solid phase extraction (SPE) using a strong anion-exchange membrane filter, and then the membrane filter was analyzed by femtosecond laser ablation inductively coupled plasma mass spectrometry (fs-LA-ICP-MS). The pH value of the sample was adjusted to 4 using ammonium hydroxide and phosphoric acid for the complete separation of the toxic inorganic arsenic from the other organic arsenics. The linear dynamic range was from 0.5 to 1000 μg/kg, and the correlation coefficient was 0.99989. The recovery efficiency was 96‑106%. The detection limit of the inorganic arsenic was 0.028 μg/kg. Our results indicate that SPE-fs-LA-ICP-MS provides enough analytical performance to analyze the toxic inorganic arsenic in water at the level of parts per trillion using the simple separation method and the rapid laser ablation sampling.


2011 ◽  
Vol 264-265 ◽  
pp. 1684-1689 ◽  
Author(s):  
M.M. Rahman ◽  
Alias Mohd Yusof ◽  
A.K.H. Wood ◽  
A. Shamsiah

A simple and less expensive solvent extraction method was used with inductively coupled plasma mass spectrometry (ICP-MS) in the speciation of two environmentally significant, toxic forms of arsenic: arsenite and arsenate. Dissolved inorganic arsenic species in drinking waters from reservoirs and treatment plants were determined by the inductively coupled plasma mass spectrometry analyses. Prior to the analysis the water samples were precocentrated by solvent extraction using APCDT to separate the arsenic species from elemental interferences. The detection limit of this method achieved was 0.059 gL-1. The suitability of the technique in this work is discussed in relation to risk assessment studies of public health.


Sign in / Sign up

Export Citation Format

Share Document