Simultaneously high fracture toughness and transverse rupture strength in ultrafine cemented carbide

CrystEngComm ◽  
2013 ◽  
Vol 15 (17) ◽  
pp. 3305 ◽  
Author(s):  
Chongbin Wei ◽  
Xiaoyan Song ◽  
Jun Fu ◽  
Xuemei Liu ◽  
Haibin Wang ◽  
...  
Keyword(s):  
Fracture Toughness ◽  
Rupture Strength ◽  
Cemented Carbide ◽  
High Fracture Toughness ◽  
High Fracture ◽  
Transverse Rupture Strength

Study on Fracture of the Fibrous Monolith Cemented Carbide

2013 ◽  
Vol 815 ◽  
pp. 43-47
Author(s):  
Cun Guang Ding ◽  
Xue Quan Liu ◽  
Yi Li ◽  
Chang Hai Li ◽  
Nan Li ◽  
...  
Keyword(s):  
Fracture Toughness ◽  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Crack Propagation ◽  
Rupture Strength ◽  
Extrusion Process ◽  
Structure Design ◽  
Cemented Carbide ◽  
Transverse Rupture Strength ◽  
Scanning Electron

A fibrous monolith cemented carbide with WC-6%Co as cell and WC-20%Co as cell boundaries was produced through hot co-extrusion process in this paper. The density, hardness, transverse rupture strength (TRS) and fracture toughness (KIc) of the fibrous monolith cemented carbide were tested, and the fracture and crack propagation were observed by metalloscope and Scanning Electron Microscope. The result shows fibrous monolith structure design could effectively improve the TRS and the KIc of WC/Co cemented carbide without a significant decrease of hardness. It is the reason of high transverse rupture strength and fracture toughness that WC-20%Co can absorb more fracture energy in order to slow, prevent, or deflect crack propagation, proved by metalloscope and scanning electron microscope.

KAISER ALUMINUM ALLOY 7050

Alloy Digest ◽  
2000 ◽  
Vol 49 (1) ◽  
Keyword(s):  
Mechanical Properties ◽  
Fracture Toughness ◽  
Tensile Strength ◽  
Aluminum Alloy ◽  
Heat Treating ◽  
High Fracture Toughness ◽  
High Fracture ◽  
Kaiser Aluminum ◽  
Structural Parts ◽  
Very High

Abstract Kaiser Aluminum Alloy 7050 has very high mechanical properties including tensile strength, high fracture toughness, and a high resistance to exfoliation and stress-corrosion cracking. The alloy is typically used in aircraft structural parts. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength as well as fracture toughness and fatigue. It also includes information on forming, heat treating, machining, and joining. Filing Code: AL-366. Producer or source: Tennalum, A Division of Kaiser Aluminum.

FERRIUM M54

Alloy Digest ◽  
2018 ◽  
Vol 67 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stress Corrosion ◽  
Stress Corrosion Cracking ◽  
High Resistance ◽  
High Strength ◽  
Cost Effective ◽  
High Fracture Toughness ◽  
High Fracture ◽  
Structural Applications ◽  
Resistance To Stress

Abstract Ferrium M54 was designed to create a cost-effective, ultra high-strength, high-fracture toughness material with a high resistance to stress-corrosion cracking for use in structural applications. This datasheet provides information on composition, hardness, and tensile properties as well asfatigue. Filing Code: SA-822. Producer or source: QuesTek Innovations, LLC.

Fracture of Soft Elastic Foam

2015 ◽  
Vol 83 (3) ◽  
Author(s):  
Zhuo Ma ◽  
Xiangchao Feng ◽  
Wei Hong
Keyword(s):  
Fracture Toughness ◽  
Fracture Energy ◽  
Cell Walls ◽  
Scaling Law ◽  
Phase Field Model ◽  
Base Material ◽  
Network Connectivity ◽  
High Fracture Toughness ◽  
High Fracture ◽  
Order Of Magnitude

Consisting of stretchable and flexible cell walls or ligaments, soft elastic foams exhibit extremely high fracture toughness. Using the analogy between the cellular structure and the network structure of rubbery polymers, this paper proposes a scaling law for the fracture energy of soft elastic foam. To verify the scaling law, a phase-field model for the fracture processes in soft elastic structures is developed. The numerical simulations in two-dimensional foam structures of various unit-cell geometries have all achieved good agreement with the scaling law. In addition, the dependences of the macroscopic fracture energy on geometric parameters such as the network connectivity and spatial orientation have also been revealed by the numerical results. To further enhance the fracture toughness, a type of soft foam structures with nonstraight ligaments or folded cell walls has been proposed and its performance studied numerically. Simulations have shown that an effective fracture energy one order of magnitude higher than the base material can be reached by using the soft foam structure.

scholarly journals Tough metal-ceramic composites with multifunctional nacre-like architecture

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Erik Poloni ◽  
Florian Bouville ◽  
Christopher H. Dreimol ◽  
Tobias P. Niebel ◽  
Thomas Weber ◽  
...  
Keyword(s):  
Fracture Toughness ◽  
Sol Gel ◽  
Ceramic Composites ◽  
High Fracture Toughness ◽  
Processing Route ◽  
High Fracture ◽  
Metal Ceramic ◽  
Attractive Option ◽  
Brick And Mortar ◽  
Robotic Applications

AbstractThe brick-and-mortar architecture of biological nacre has inspired the development of synthetic composites with enhanced fracture toughness and multiple functionalities. While the use of metals as the “mortar” phase is an attractive option to maximize fracture toughness of bulk composites, non-mechanical functionalities potentially enabled by the presence of a metal in the structure remain relatively limited and unexplored. Using iron as the mortar phase, we develop and investigate nacre-like composites with high fracture toughness and stiffness combined with unique magnetic, electrical and thermal functionalities. Such metal-ceramic composites are prepared through the sol–gel deposition of iron-based coatings on alumina platelets and the magnetically-driven assembly of the pre-coated platelets into nacre-like architectures, followed by pressure-assisted densification at 1450 °C. With the help of state-of-the-art characterization techniques, we show that this processing route leads to lightweight inorganic structures that display outstanding fracture resistance, show noticeable magnetization and are amenable to fast induction heating. Materials with this set of properties might find use in transport, aerospace and robotic applications that require weight minimization combined with magnetic, electrical or thermal functionalities.

scholarly journals Mechanical Properties of CaO–Al2O3–SiO2 Glass-Ceramics Precipitating Hexagonal CaAl2Si2O8 Crystals

Crystals ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 393
Author(s):  
Kei Maeda ◽  
Kosho Akatsuka ◽  
Gaku Okuma ◽  
Atsuo Yasumori
Keyword(s):  
Fracture Toughness ◽  
Liquidus Temperature ◽  
Fracture Behavior ◽  
Glass Ceramics ◽  
High Fracture Toughness ◽  
Flexural Test ◽  
Toughening Mechanism ◽  
High Fracture ◽  
X Ray ◽  
Microcrack Toughening

Fracture behavior via a flexural test for a newly found CaO–Al2O3–SiO2 (CAS) glass-ceramic (GC) was compared with that of enstatite GC and mica GC, which are well-known GCs with high-fracture toughness and machinability, respectively. By focusing on the nonelastic load–displacement curves, CAS GC was characterized as a less brittle material similar to machinable mica GC, compared with enstatite GC, which showed higher fracture toughness, KIC. The microcrack toughening mechanism in CAS GC was supported by the nondestructive observation of microcracks around the Vickers indentation using the X-ray microcomputed tomography technique. The CAS GC also showed higher transparency than mica GC due to its low crystallinity. Moreover, the precursor glass had easy formability due to its low-liquidus temperature.

Influence of additive composition on thermal and mechanical properties of β–Si3N4 ceramics

2004 ◽  
Vol 19 (11) ◽  
pp. 3270-3278 ◽  
Author(s):  
Xinwen Zhu ◽  
Hiroyuki Hayashi ◽  
You Zhou ◽  
Kiyoshi Hirao
Keyword(s):  
Mechanical Properties ◽  
Thermal Conductivity ◽  
Fracture Toughness ◽  
Nitrogen Pressure ◽  
High Fracture Toughness ◽  
Oxygen Impurity ◽  
Thermal And Mechanical Properties ◽  
High Fracture ◽  
Doped Materials ◽  
Gas Pressure Sintering

Dense β–Si3N4 ceramics were fabricated from α–Si3N4 raw powder by gas-pressure sintering at 1900 °C for 12 h under a nitrogen pressure of 1 MPa, using four different kinds of additive compositions: Yb2O3–MgO, Yb2O3–MgSiN2, Y2O3–MgO, and Y2O3–MgSiN2. The effects of additive composition on the microstructure and thermal and mechanical properties of β–Si3N4 ceramics were investigated. It was found that the replacement of Yb2O3 by Y2O3 has no significant effect on the thermal conductivity and fracture toughness, but the replacement of MgO by MgSiN2 leads to an increase in thermal conductivity from 97 to 113 Wm-1K-1and fracture toughness from 8 to 10 MPa m1/2, respectively. The enhanced thermal conductivity of the MgSiN2-doped materials is attributed to the purification of β–Si3N4 grain and increase of Si3N4–Si3N4 contiguity, resulting from the enhanced growth of large elongated grains. The improved fracture toughness of the MgSiN2-doped materials is attributed to the increase of grain size and fraction of large elongated grains. However, the same thermal conductivity between the Yb2O3- and Y2O3-doped materials is related to not only their similar microstructures, but also the similar abilities of removing oxygen impurity in Si3N4 lattice between Yb2O3 and Y2O3. The same fracture toughness between the Yb2O3- and Y2O3-doped materials is consistent with their similar microstructures. This work implies that MgSiN2 is an effective sintering aid for developing not only high thermal conductivity (>110 Wm−1K−1) but also high fracture toughness (>10 MPa m1/2) of Si3N4 ceramics.

scholarly journals Automatic Evaluation of the Mechanical Properties of Steels Maraging using Digital Image Processing Techniques

2020 ◽  
Author(s):  
Angélica Alves Viana ◽  
Savio Lopes Rabelo ◽  
José Daniel de Alencar Santos ◽  
Venceslau Xavier de Lima Filho ◽  
Douglas De Araújo Rodrigues ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Fracture Toughness ◽  
Maraging Steel ◽  
Raw Material ◽  
High Fracture Toughness ◽  
Mechanical Resistance ◽  
High Fracture ◽  
Traditional System ◽  
Transformation Methods ◽  
Processing Techniques

Some strategic sectors of the economy require that the raw material of their machines and equipment have mechanical properties that satisfy their use. Maraging steel is a material of great concern since it is necessary to have a high mechanical resistance associated with high fracture toughness. The traditional tests to determine the fracture toughness of this material before use in applications are the Charpy and KIC tests. However, this process is characterized by being exhaustive and requiring specialized and trained professionals. Thus, to reverse this situation, this work proposes a new approach to determine the mechanical properties of maraging steel. For this, initially, the method removes any artifacts present in the image resulting from the mode of acquisition. In sequence, this works tested the method Extended Minimum Transformation (EMT) and mathematical morphology to find these markers of the regions of the dimples. Then, the Adaptive Thresholding, Optimal Global Thresholdusing the Otsu Method and Watershed transformation methods were used to segment the dimples. In the end, the diameter of the dimples and the toughness of the material were calculated. Tests are carried out and compared with the result obtained by specialists using the traditional system to evaluate the proposed approach. The results obtained were satisfactory for the application because the proposed approach presented speed and precision to the conventional methods.

Sign in / Sign up

Export Citation Format

Share Document