A countless amount of energy has been wasted in all kinds of expansion valves (EV) in industries. In fact, EVs, including regulators, throttling valves, capillary tubes, etc., have been used to intentionally reduce the potential of carrier fluid. City gate stations (CGS) have been recognized as one of the important points with high potential for energy harvesting due to its function for regulating natural gas (NG) pressure by EV. In this study, Tesla turbine (TT) is introduced as a new candidate for substitution of EV, particularly those that have been employed in CGS on high-pressure NG pipelines, as well as those applications in which high-potential fluid must be reduced to a low-potential state to form a complete thermodynamic cycle or to be used at end-user equipment. Although harvesting energy is one of the hottest fields of science and engineering, there are few traces of research on using a TT as an alternative for EVs, even for the industries possessing high-pressure lines. This numerical experiment intends to show the capability of TT as a robust candidate for substituting regulation valves through investigating thermohydrodynamic characteristics of the turbulent high-pressure compressible NG flow through a TT under different operation conditions. This study, with the objective of managing the exploitation of resources, can be considered as one step forward toward reinforcing economic and environmental pillars of sustainable development. It is also found that the generated power by TT can support the 285 7W LED simultaneously, or it is equivalent to 84.4 m2 area of the solar panel (150 W, 15.42% efficiency) for the climate condition of Toronto, Canada.
Energy Harvesting by a Novel Substitution for Expansion Valves: Special Focus on City Gate Stations of High-Pressure Natural Gas Pipelines