Analysis of metallic nanoparticle-DNA assembly formation in bulk solution via localized surface plasmon resonance shift

RSC Advances ◽  
2012 ◽  
Vol 2 (12) ◽  
pp. 5154 ◽  
Author(s):  
Kah Ee Fong ◽  
Lin-Yue Lanry Yung
Author(s):  
Jiawei Zhang ◽  
Gitanjali Kolhatkar ◽  
Andreas Ruediger

The localized surface plasmon resonance (LSPR) position in tip-enhanced Raman spectroscopy (TERS) is of great importance to the understanding and interpretation of the relative intensity of different enhanced Raman modes....


2020 ◽  
Vol 855 ◽  
pp. 243-247
Author(s):  
Muhammad Sujak ◽  
Dede Djuhana

In this work, we have investigated the localized surface plasmon resonance profile of promising non-noble metals such as nickel (Ni), iron (Fe), and permalloy (Ni80Fe20) as an alternative plasmonic material. The nanoparticle formed a sphere with varying the diameter from 10 nm to 200 nm with increment 10 nm, and the medium of nanoparticles is air (1+0i). The calculation was carried out by metallic nanoparticle boundary element method package. Furthermore, our result shows that increasing diameter of particles (iron, nickel, and permalloy) would increase the efficiency of ratio scattering to absorption, and the LSPRs peak led to shift to lower energy (red-shift). The ratio of scattering to absorption indicates a strengthening of radiative damping in large particle-size which largely used in biological cell imaging. However, iron’s efficiency much lower than nickel and permalloy. For example, at the highest diameter, such 200 nm, the efficiency of iron is just over around 1.25 while nickel and permalloy well under nearly 2.0. In addition, nickel and permalloy’s LSPR happened in visible range. Our results serve a systematic understanding of the shifting spectrum pattern for prospective ferromagnetic materials


Photonics ◽  
2020 ◽  
Vol 7 (3) ◽  
pp. 53 ◽  
Author(s):  
Grégory Barbillon

An explosion in the interest for nanoplasmonics has occurred in order to realize optical devices, biosensors, and photovoltaic devices. The plasmonic nanostructures are used for enhancing and confining the electric field. In the specific case of biosensing, this electric field confinement can induce the enhancement of the Raman signal of different molecules, or the localized surface plasmon resonance shift after the detection of analytes on plasmonic nanostructures. A major part of studies concerning to plasmonic modes and their application to sensing of analytes is realized in ambient environment. However, over the past decade, an emerging subject of nanoplasmonics has appeared, which is nanoplasmonics in high pressure environment. In last five years (2015–2020), the latest advances in this emerging field and its application to sensing were carried out. This short review is focused on the pressure effect on localized surface plasmon resonance of gold nanosystems, the supercrystal formation of plasmonic nanoparticles stimulated by high pressure, and the detection of molecules and phase transitions with plasmonic nanostructures in high pressure environment.


2021 ◽  
pp. 2100653
Author(s):  
Gyeong‐Su Park ◽  
Kyung Suk Min ◽  
Hyuksang Kwon ◽  
Sangwoon Yoon ◽  
Sangwon Park ◽  
...  

Plasmonics ◽  
2021 ◽  
Author(s):  
Mohammad Rakibul Islam ◽  
Fahim Yasir ◽  
Md. Rakib Hossain Antor ◽  
Mahmudul Hassan Turja ◽  
Ashikur Rahman ◽  
...  

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Kohei Shimanoe ◽  
Soshi Endo ◽  
Tetsuya Matsuyama ◽  
Kenji Wada ◽  
Koichi Okamoto

AbstractLocalized surface plasmon resonance (LSPR) was performed in the deep ultraviolet (UVC) region with Al nanohemisphere structures fabricated by means of a simple method using a combination of vapor deposition, sputtering, and thermal annealing without top-down nanofabrication technology such as electron beam lithography. The LSPR in the UV region was obtained and tuned by the initial metal film thickness, annealing temperature, and dielectric spacer layer thickness. Moreover, we achieved a flexible tuning of the LSPR in a much deeper UVC region below 200 nm using a nanohemisphere on a mirror (NHoM) structure. NHoM is a structure in which a metal nanohemisphere is formed on a metal substrate that is interposed with an Al2O3 thin film layer. In the experimental validation, Al and Ga were used for the metal hemispheres. The LSPR spectrum of the NHoM structures was split into two peaks, and the peak intensities were enhanced and sharpened. The shorter branch of the LSPR peak appeared in the UVC region below 200 nm. Both the peak intensities and linewidth were flexibly tuned by the spacer thickness. This structure can contribute to new developments in the field of deep UV plasmonics.


RSC Advances ◽  
2015 ◽  
Vol 5 (31) ◽  
pp. 23990-23998 ◽  
Author(s):  
Gaoling Liang ◽  
Zhongjun Zhao ◽  
Yin Wei ◽  
Kunping Liu ◽  
Wenqian Hou ◽  
...  

A simple, label-free and cost-effective localized surface plasmon resonance (LSPR) immunosensing method was developed for detection of alpha-fetoprotein (AFP).


Sign in / Sign up

Export Citation Format

Share Document