scholarly journals An integrated fiber-optic microfluidic device for detection of muscular force generation of microscopic nematodes

Lab on a Chip ◽  
2012 ◽  
Vol 12 (18) ◽  
pp. 3458 ◽  
Author(s):  
Peng Liu ◽  
Depeng Mao ◽  
Richard J. Martin ◽  
Liang Dong
Sensors ◽  
2021 ◽  
Vol 21 (22) ◽  
pp. 7493
Author(s):  
Krystian L. Wlodarczyk ◽  
William N. MacPherson ◽  
Duncan P. Hand ◽  
M. Mercedes Maroto-Valer

In situ measurements are highly desirable in many microfluidic applications because they enable real-time, local monitoring of physical and chemical parameters, providing valuable insight into microscopic events and processes that occur in microfluidic devices. Unfortunately, the manufacturing of microfluidic devices with integrated sensors can be time-consuming, expensive, and “know-how” demanding. In this article, we describe an easy-to-implement method developed to integrate various “off-the-shelf” fiber optic sensors within microfluidic devices. To demonstrate this, we used commercial pH and pressure sensors (“pH SensorPlugs” and “FOP-MIV”, respectively), which were “reversibly” attached to a glass microfluidic device using custom 3D-printed connectors. The microfluidic device, which serves here as a demonstrator, incorporates a uniform porous structure and was manufactured using a picosecond pulsed laser. The sensors were attached to the inlet and outlet channels of the microfluidic pattern to perform simple experiments, the aim of which was to evaluate the performance of both the connectors and the sensors in a practical microfluidic environment. The bespoke connectors ensured robust and watertight connection, allowing the sensors to be safely disconnected if necessary, without damaging the microfluidic device. The pH SensorPlugs were tested with a pH 7.01 buffer solution. They measured the correct pH values with an accuracy of ±0.05 pH once sufficient contact between the injected fluid and the measuring element (optode) was established. In turn, the FOP-MIV sensors were used to measure local pressure in the inlet and outlet channels during injection and the steady flow of deionized water at different rates. These sensors were calibrated up to 140 mbar and provided pressure measurements with an uncertainty that was less than ±1.5 mbar. Readouts at a rate of 4 Hz allowed us to observe dynamic pressure changes in the device during the displacement of air by water. In the case of steady flow of water, the pressure difference between the two measuring points increased linearly with increasing flow rate, complying with Darcy’s law for incompressible fluids. These data can be used to determine the permeability of the porous structure within the device.


Neurology ◽  
1993 ◽  
Vol 43 (3, Part 1) ◽  
pp. 527-527 ◽  
Author(s):  
K. R. Sharma ◽  
M. A. Mynhier ◽  
R. G. Miller

Blood ◽  
2013 ◽  
Vol 122 (21) ◽  
pp. 2363-2363 ◽  
Author(s):  
Lucas Ting ◽  
Shirin Feghhi ◽  
Ari Karchin ◽  
Wes Tooley ◽  
Nathan J White ◽  
...  

Abstract Introduction In primary hemostasis, platelets adhere, activate, and aggregate at the wall of an injured vessel to form a hemostatic plug for the cessation of bleeding. After activation, platelets generate myosin-driven contractile forces to compact the size of the plug in order to reduce the space between platelets and prevent their disaggregation. Hemodynamic shear can be a major effector of platelet function in hemostasis, but its effect on the ability of platelets to produce contractile forces is an open question. Studying the dynamics of platelet aggregation and platelet force generation under hemodynamic shear can provide important insights into hemostasis and thrombosis. Method We have developed a microfluidic device that uses microscale blocks to induce platelet aggregation and microscale posts to measure platelet forces in a hemostatic plug. Whole human blood in heparin or citrate is pumped through a microfabricated chip containing microchannels with arrays of blocks and posts arranged along the bottom of a microchannel (Fig. 1). The surface of the blocks and posts are pre-coated with von Willebrand factor and type I collagen to allow for platelet adhesion. As blood is passes over a block, its rectangular shape induces a high shear rate that causes platelets to aggregate on its surface. A flexible micropost is situated behind each block. As platelets aggregate between the block and post, their contractile forces causes the post to bend toward the block. The deflection of the post is recorded under fluorescence microscopy and analyzed using quantitative image analysis of the videos. Since a microscale post bends like a cantilever beam, its deflection can be used to quantify the forces of platelets. Results Blebbistatin, a myosin inhibitor, was used to confirm that deflection of the posts by the platelets in heparinized blood was due to myosin activity. When blood was incubated with 2-MeSAMP, a P2Y12 antagonist, platelets were able to aggregate, but their ability to generate contractile forces was substantially reduced. This finding indicates that ADP activation is needed for platelet contractility under shear. The rate of hemodynamic shear was found to influence platelet function, for the rate of platelet aggregation and force generation were found to increase for blood sheared from 2000 to 12,000 s-1. Moreover, platelet aggregation and contractile forces were reduced when glycoprotein Ib-V-IX complex and integrin αIIbβ3 were inhibited with antibody AK2 and antibody fragment c7E3 Fab, respectively. When citrated blood was incubated with tissue plasminogen activator, platelets aggregate and produced contractile forces that increased steadily within the first ten minutes, but then the forces began to subside. Conclusions Our device can be used to study the role of hemodynamic shear in platelet function and gives insights into the role of platelet forces during hemostasis. Its microscale dimensions also allow us the study the biomechanics involved in the formation of a hemostatic plug during its early stages of growth and stability. Disclosures: White: Vidacare Corp: Honoraria; Stasys Medical Corp: Consultancy, Equity Ownership, Membership on an entity’s Board of Directors or advisory committees, Patents & Royalties; NIH: Research Funding; Coulter Foundation: Research Funding; Washington State Life Sciences Discovery Fund: Research Funding. Sniadecki:Stasys Medical Corporation: Equity Ownership, Founder Other, Membership on an entity’s Board of Directors or advisory committees.


Author(s):  
Kosuke Sekiyama ◽  
◽  
Masahiro Ito ◽  
Toshio Fukuda ◽  
Takashi Suzuki ◽  
...  

Evaluating the influences of human-machine interface (HMI) visual information is vital to developing the user-oriented and human-friendly equipment, robots, etc. We define HMI visual information as prior information, such as size, color, shape, etc. The relationship between prior information and the Kansei feeling is evaluated by surface electromyogram (sEMG). This study deals with object-grasping motion and measures sEMG signals during the motion. Prediction on object-grasping motion is predicted from sEMG signals and defined as Force Prediction (FP). Differences between prediction of HMI operation and actual results are assumed to influence on Kansei feeling concerning the operation. Subjects given different prior information calculate FP about plastic bottles when grasping them. Experimental results show that the FP differs even though the plastic bottles have the same weight. The influence of prior information on FP is visually plotted in a three-dimensional map which is called Size-Color-iEMG map, and its application is to HMI design.


1989 ◽  
Vol 12 (8) ◽  
pp. 647-659 ◽  
Author(s):  
Karlheinz Reiners ◽  
J�rg Herdmann ◽  
Hans-Joachim Freund

Author(s):  
J. M. Cowley ◽  
R. Glaisher ◽  
J. A. Lin ◽  
H.-J. Ou

Some of the most important applications of STEM depend on the variety of imaging and diffraction made possible by the versatility of the detector system and the serial nature, of the image acquisition. A special detector system, previously described, has been added to our STEM instrument to allow us to take full advantage of this versatility. In this, the diffraction pattern in the detector plane may be formed on either of two phosphor screens, one with P47 (very fast) phosphor and the other with P20 (high efficiency) phosphor. The light from the phosphor is conveyed through a fiber-optic rod to an image intensifier and TV system and may be photographed, recorded on videotape, or stored digitally on a frame store. The P47 screen has a hole through it to allow electrons to enter a Gatan EELS spectrometer. Recently a modified SEM detector has been added so that high resolution (10Å) imaging with secondary electrons may be used in conjunction with other modes.


2019 ◽  
Vol 107 (3) ◽  
pp. 305
Author(s):  
Mengmei Geng ◽  
Yuting Long ◽  
Tongqing Liu ◽  
Zijuan Du ◽  
Hong Li ◽  
...  

Surface-enhanced Raman Scattering (SERS) fiber probe provides abundant interaction area between light and materials, permits detection within limited space and is especially useful for remote or in situ detection. A silver decorated SERS fiber optic probe was prepared by hydrothermal method. This method manages to accomplish the growth of silver nanoparticles and its adherence on fiber optic tip within one step, simplifying the synthetic procedure. The effects of reaction time on phase composition, surface plasmon resonance property and morphology were investigated by X-ray diffraction analysis (XRD), ultraviolet-visible absorption spectrum (UV-VIS absorption spectrum) and scanning electron microscope (SEM). The results showed that when reaction time is prolonged from 4–8 hours at 180 °C, crystals size and size distribution of silver nanoparticles increase. Furthermore, the morphology, crystal size and distribution density of silver nanoparticles evolve along with reaction time. A growth mechanism based on two factors, equilibrium between nucleation and growth, and the existence of PVP, is hypothesized. The SERS fiber probe can detect rhodamin 6G (R6G) at the concentration of 10−6 M. This SERS fiber probe exhibits promising potential in organic dye and pesticide residue detection.


2005 ◽  
Vol 36 (02) ◽  
Author(s):  
H Amthor ◽  
R Navarette ◽  
SC Brown ◽  
R Macharia ◽  
F Muntoni ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document