Conductive patterns on plastic substrates by sequential inkjet printing of silver nanoparticles and electrolyte sintering solutions

2012 ◽  
Vol 22 (29) ◽  
pp. 14349 ◽  
Author(s):  
Michael Layani ◽  
Michael Grouchko ◽  
Shai Shemesh ◽  
Shlomo Magdassi
Keyword(s):  
Silver Nanoparticles ◽  
Inkjet Printing ◽  
Plastic Substrates

UV crosslinkable emulsions with silver nanoparticles for inkjet printing of conductive 3D structures

2013 ◽  
Vol 1 (19) ◽  
pp. 3244 ◽  
Author(s):  
Michael Layani ◽  
Ido Cooperstein ◽  
Shlomo Magdassi
Keyword(s):  
Silver Nanoparticles ◽  
Inkjet Printing ◽  
3D Structures

Preparation of silver nanoparticles with hyperbranched polymers as a stabilizer for inkjet printing of flexible circuits

2019 ◽  
Vol 43 (6) ◽  
pp. 2797-2803 ◽  
Author(s):  
Yueyue Hao ◽  
Jian Gao ◽  
Zesheng Xu ◽  
Nan Zhang ◽  
Jing Luo ◽  
...  
Keyword(s):  
Silver Nanoparticles ◽  
Aqueous Phase ◽  
Inkjet Printing ◽  
Hyperbranched Polymer ◽  
Hyperbranched Polymers ◽  
Conductive Ink ◽  
Polymer Stabilized

Carboxyl-terminated hyperbranched polymer-stabilized silver nanoparticles were synthesized in the aqueous phase and used to prepare a printable conductive ink.

Precise micropatterning of silver nanoparticles on plastic substrates

2017 ◽  
Vol 401 ◽  
pp. 353-361 ◽  
Author(s):  
Lena Ammosova ◽  
Yu Jiang ◽  
Mika Suvanto ◽  
Tapani A. Pakkanen
Keyword(s):  
Silver Nanoparticles ◽  
Plastic Substrates

Preparing and Applying Silver Nanoparticles in Conductive Ink and Inkjet Painting

2021 ◽  
Vol 21 (12) ◽  
pp. 5979-5986
Author(s):  
Gui Bing Hong ◽  
Yi Hua Luo ◽  
Kai Jen Chuang ◽  
Chih Ming Ma
Keyword(s):  
Silver Nanoparticles ◽  
Inkjet Printing ◽  
Chemical Reduction ◽  
Flexible Substrate ◽  
High Surface ◽  
High Surface Area ◽  
Reducing Agent ◽  
Noble Metal Nanoparticles ◽  
Conductive Ink ◽  
Uniform Size

Noble metal nanoparticles have special properties in optical, electronic, and physical chemistry due to their high surface area and volume. With the development of electronic printing technology, inkjet printing has gradually replaced traditional spin coating and blade coating, since it leads to more material savings and a faster batch production, and the pattern can be easily designed by a computer. In this study, Ag nanoparticles were prepared by a chemical reduction method. Non-toxic, environment-friendly agents were selected to fabricate a single-shape, uniform-size, crystal-form, and monodisperse product. The effects of the reducing agent ratio and the stabilizer ratio on the size, shape, and stability of the nanoparticles are discussed. The silver nanoparticles were characterized by an ultraviolet-visible spectrophotometer (UV-vis) and a transmission electron microscope (TEM). In addition, in order to prepare conductive ink that can stably disperse for a long time and that can be applied to inkjet printing on a PET flexible substrate at a lower sintering temperature, a sintering agent and a commercial surfactant were added. The experimental results show that the best addition ratio of the precursor to the reducing agent and the stabilizer is 1:6:1. The conductive silver ink was printed and treated by a70 mM NaCl solution, and the electric resistivity was 5.17×10−4 Ω· cm.

scholarly journals Generation of micro-sized conductive lines on glass fibre fabrics by inkjet printing

2012 ◽  
Vol 12 (2) ◽  
pp. 55-60 ◽  
Author(s):  
Unai Balda Irurzuna ◽  
Victoria Dutschka ◽  
Alfredo Calvimontesb ◽  
Remko Akkermana
Keyword(s):  
Silver Nanoparticles ◽  
Confocal Microscopy ◽  
Glass Fibre ◽  
Inkjet Printing ◽  
Conductive Ink ◽  
Scanning Electron

Abstract Micro-sized lines were inkjet printed on glass fibre fabrics using different droplet spacing. A conductive ink containing silver nanoparticles was used in this study. Glass fibre fabrics were differently pre-treated to avoid spontaneous spreading of the ink dispersion. The sample topography was examined using scanning electron, optical and confocal microscopy with a chromatic sensor. Printability conditions were discussed based on the results of topographic characterization and wettability measurements.

scholarly journals Fabrication and Evaluation of a Novel Non-Invasive Stretchable and Wearable Respiratory Rate Sensor Based on Silver Nanoparticles Using Inkjet Printing Technology

Polymers ◽  
2019 ◽  
Vol 11 (9) ◽  
pp. 1518 ◽  
Author(s):  
Ala’aldeen Al-Halhouli ◽  
Loiy Al-Ghussain ◽  
Saleem El Bouri ◽  
Haipeng Liu ◽  
Dingchang Zheng
Keyword(s):  
Silver Nanoparticles ◽  
Inkjet Printing ◽  
Human Subjects ◽  
Identical Condition ◽  
Low Cost ◽  
Good Mechanical Property ◽  
Clinical Practices ◽  
Healthy Human ◽  
Printing Technology ◽  
Inkjet Printing Technology

The respiration rate (RR) is a key vital sign that links to adverse clinical outcomes and has various important uses. However, RR signals have been neglected in many clinical practices for several reasons and it is still difficult to develop low-cost RR sensors for accurate, automated, and continuous measurement. This study aims to fabricate, develop and evaluate a novel stretchable and wearable RR sensor that is low-cost and easy to use. The sensor is fabricated using the soft lithography technique of polydimethylsiloxane substrates (PDMS) for the stretchable sensor body and inkjet printing technology for creating the conductive circuit by depositing the silver nanoparticles on top of the PDMS substrates. The inkjet-printed (IJP) PDMS-based sensor was developed to detect the inductance fluctuations caused by respiratory volumetric changes. The output signal was processed in a Wheatstone bridge circuit to derive the RR. Six different patterns for a IJP PDMS-based sensor were carefully designed and tested. Their sustainability (maximum strain during measurement) and durability (the ability to go bear axial cyclic strains) were investigated and compared on an automated mechanical stretcher. Their repeatability (output of the sensor in repeated tests under identical condition) and reproducibility (output of different sensors with the same design under identical condition) were investigated using a respiratory simulator. The selected optimal design pattern from the simulator evaluation was used in the fabrication of the IJP PDMS-based sensor where the accuracy was inspected by attaching it to 37 healthy human subjects (aged between 19 and 34 years, seven females) and compared with the reference values from e-Health nasal sensor. Only one design survived the inspection procedures where design #6 (array consists of two horseshoe lines) indicated the best sustainability and durability, and went through the repeatability and reproducibility tests. Based on the best pattern, the developed sensor accurately measured the simulated RR with an error rate of 0.46 ± 0.66 beats per minute (BPM, mean ± SD). On human subjects, the IJP PDMS-based sensor and the reference e-Health sensor showed the same RR value, without any observable differences. The performance of the sensor was accurate with no apparent error compared with the reference sensor. Considering its low cost, good mechanical property, simplicity, and accuracy, the IJP PDMS-based sensor is a promising technique for continuous and wearable RR monitoring, especially under low-resource conditions.

Annealed graphene sheets decorated with silver nanoparticles for inkjet printing

2015 ◽  
Vol 260 ◽  
pp. 582-589 ◽  
Author(s):  
Gongkai Wang ◽  
Zhuo Wang ◽  
Zhihong Liu ◽  
Jiachen Xue ◽  
Guoqing Xin ◽  
...  
Keyword(s):  
Silver Nanoparticles ◽  
Inkjet Printing ◽  
Graphene Sheets
Sign in / Sign up

Export Citation Format

Share Document