Crystal engineering with urea and thiourea hydrogen-bonding groups

2008 ◽  
pp. 295-307 ◽  
Author(s):  
Radu Custelcean
Keyword(s):  
Hydrogen Bonding ◽  
Crystal Engineering

Concomitant polymorphs of 1,3-bis(3-fluorophenyl)urea

2016 ◽  
Vol 72 (9) ◽  
pp. 692-696 ◽  
Author(s):  
Christina A. Capacci-Daniel ◽  
Jeffery A. Bertke ◽  
Shoaleh Dehghan ◽  
Rupa Hiremath-Darji ◽  
Jennifer A. Swift
Keyword(s):  
Hydrogen Bonding ◽  
Crystal Engineering ◽  
Structural Motif ◽  
Parallel Orientation ◽  
One Dimensional ◽  
Monoclinic Form ◽  
Engineering Studies ◽  
Hydrogen Bonded

Hydrogen bonding between urea functionalities is a common structural motif employed in crystal-engineering studies. Crystallization of 1,3-bis(3-fluorophenyl)urea, C13H10F2N2O, from many solvents yielded concomitant mixtures of at least two polymorphs. In the monoclinic form, one-dimensional chains of hydrogen-bonded urea molecules align in an antiparallel orientation, as is typical of many diphenylureas. In the orthorhombic form, one-dimensional chains of hydrogen-bonded urea molecules have a parallel orientation rarely observed in symmetrically substituted diphenylureas.

Polysulfonylamine, CXXVI [1] Wasserstoffbrücken in kristallinen Onium-dimesylamiden: Ein robustes Achtring-Synthon in Koexistenz mit einem dritten Wasserstoffbrückenmotiv - Cyclodimere, Ketten, supramolekulare Bindungsisomere und ein fünffach verwobenes dreidimensionales (C-H ∙∙∙ O - Netzwerk / Polysulfonylamines, CXXVI [1] Hydrogen Bonding in Crystalline Onium Dimesylamides: A Robust Eight- Membered Ring Synthon in Coexistence with a Third Hydrogen Bonding Motif - Cyclodimers, Chains, Supramolecular Linkage Isomers, and a Quintuply Interwoven Three-Dimensional C - H ∙∙∙ O Network

2000 ◽  
Vol 55 (8) ◽  
pp. 738-752 ◽  
Author(s):  
Oliver Moers ◽  
Karna Wijaya ◽  
Ilona Lange ◽  
Armand Blaschette ◽  
Peter G. Jones
Keyword(s):  
Hydrogen Bond ◽  
Hydrogen Bonding ◽  
Crystal Engineering ◽  
Ion Pairs ◽  
Three Dimensional ◽  
Membered Ring ◽  
Monoclinic Space Group ◽  
Hydrogen Bond Donor ◽  
Linkage Isomers ◽  
Ionic Solids

As an exercise in crystal engineering, low-temperature X-ray structures were determined for six rationally designed ionic solids of general formula BH+(MeSO2)2N−, where BH+ is 2-aminopyridinium (2, monoclinic, space group P21/c, Z = 4), 2-aminopyrimidinium (3, orthorhombic, Pbca, Z = 8), 2-aminothiazolium (4, orthorhombic, Pbcn, Z = 8), 2-amino-6-methylpyridinium (5, solvated with 0.5 H20, monoclinic, C2/c, Z = 8), 2-amino-1,3,4-thiadiazolium (6, triclinic, P1̄, Z = 2), or 2-amino-4,6-dimethylpyrimidinium (7, orthorhombic. Fdd2, Z = 16). The onium cations in question exhibit a trifunctional hydrogen-bond donor sequence H − N (H*)-C (sp2) − N − H , which is complementary to an O − S (sp3)−N fragment of the anion and simultaneously expected to form a third hydrogen bond via the exocyclic N − H* donor. Consequently, all the crystal packings contain cation-anion pairs assembled by an N − H ∙∙∙ N and an N −H ∙∙∙ O hydrogen bond, these substructures being mutually associated through an N − H* ∙∙∙ O bond. For the robust eight-membered ring synthon within the ion pairs [graph set N2 = R22(8), antidromic], two supramolecular isomers were observed: In 2 and 3, N − H ∙∙∙ N originates from the ring NH donor and N − H ∙∙∙ O from the exocyclic amino group, whereas in 4-7 these connectivities are reversed. The third hydrogen bond, N − H*∙∙∙ O , leads either to chains of ion pairs (generated by a 21 transformation in 2-4 or by a glide plane in 5) or to cyclic dimers of ion pairs (Ci symmetric in 6, C2-symmetric in 7). The overall variety of motifs observed in a small number of structures reflects the limits imposed on the prediction of hydrogen bonding patterns. Owing to the excess of potential acceptors over traditional hydrogen-bond donors, several of the structures display prominent non-classical secondary bonding. Thus, the cyclodimeric units of 6 are associated into strands through short antiparallel O ∙∙∙ S(cation) interactions. In the hemihydrate 5, two independent C-H(cation) ∙∙∙ O bonds generate a second antidromic R22(8) pattern, leading to sheets composed of N − H ∙∙∙ N/O connected catemers; the water molecules are alternately sandwiched between and O - H ∙∙∙ O bonded to the sheets to form bilayers, which are cross-linked by a third C − H (cation ) ∙∙∙ O contact. The roof-shaped cyclodimers occurring in 7 occupy the polar C2 axes parallel to z and build up hollow Car− H ∙∙∙ O bonded tetrahedral lattices; in order to fill their large empty cavities, five translationally equivalent lattices mutually interpenetrate.

Sulfur as hydrogen-bond acceptor in cocrystals of 2-thio-modified thymine

2018 ◽  
Vol 74 (1) ◽  
pp. 21-30 ◽  
Author(s):  
Wilhelm Maximilian Hützler ◽  
Michael Bolte
Keyword(s):  
Hydrogen Bond ◽  
Hydrogen Bonding ◽  
Crystal Engineering ◽  
Rational Design ◽  
Three Dimensional ◽  
Good Reliability ◽  
Hydrogen Bond Acceptor ◽  
Hydrogen Bonding Interactions ◽  
Hydrogen Bonding Site ◽  
Hydrogen Bonded

Doubly and triply hydrogen-bonded supramolecular synthons are of particular interest for the rational design of crystal and cocrystal structures in crystal engineering since they show a high robustness due to their high stability and good reliability. The compound 5-methyl-2-thiouracil (2-thiothymine) contains an ADA hydrogen-bonding site (A = acceptor and D = donor) if the S atom is considered as an acceptor. We report herein the results of cocrystallization experiments with the coformers 2,4-diaminopyrimidine, 2,4-diamino-6-phenyl-1,3,5-triazine, 6-amino-3H-isocytosine and melamine, which contain complementary DAD hydrogen-bonding sites and, therefore, should be capable of forming a mixed ADA–DAD N—H...S/N—H...N/N—H...O synthon (denoted synthon 3s N·S;N·N;N·O), consisting of three different hydrogen bonds with 5-methyl-2-thiouracil. The experiments yielded one cocrystal and five solvated cocrystals, namely 5-methyl-2-thiouracil–2,4-diaminopyrimidine (1/2), C5H6N2OS·2C4H6N4, (I), 5-methyl-2-thiouracil–2,4-diaminopyrimidine–N,N-dimethylformamide (2/2/1), 2C5H6N2OS·2C4H6N4·C3H7NO, (II), 5-methyl-2-thiouracil–2,4-diamino-6-phenyl-1,3,5-triazine–N,N-dimethylformamide (2/2/1), 2C5H6N2OS·2C9H9N5·C3H7NO, (III), 5-methyl-2-thiouracil–6-amino-3H-isocytosine–N,N-dimethylformamide (2/2/1), (IV), 2C5H6N2OS·2C4H6N4O·C3H7NO, (IV), 5-methyl-2-thiouracil–6-amino-3H-isocytosine–N,N-dimethylacetamide (2/2/1), 2C5H6N2OS·2C4H6N4O·C4H9NO, (V), and 5-methyl-2-thiouracil–melamine (3/2), 3C5H6N2OS·2C3H6N6, (VI). Synthon 3s N·S;N·N;N·O was formed in three structures in which two-dimensional hydrogen-bonded networks are observed, while doubly hydrogen-bonded interactions were formed instead in the remaining three cocrystals whereby three-dimensional networks are preferred. As desired, the S atoms are involved in hydrogen-bonding interactions in all six structures, thus illustrating the ability of sulfur to act as a hydrogen-bond acceptor and, therefore, its value for application in crystal engineering.

Directional Weak Intermolecular Interactions: σ-Hole Bonding

2010 ◽  
Vol 63 (12) ◽  
pp. 1598 ◽  
Author(s):  
Jane S. Murray ◽  
Kevin E. Riley ◽  
Peter Politzer ◽  
Timothy Clark
Keyword(s):  
Hydrogen Bonding ◽  
Intermolecular Interactions ◽  
Electrostatic Potential ◽  
Crystal Engineering ◽  
Molecular Electrostatic Potential ◽  
Weak Interactions ◽  
Halogen Bonding ◽  
Donor Atom ◽  
Weak Intermolecular Interactions ◽  
Special Case

The prototypical directional weak interactions, hydrogen bonding and σ-hole bonding (including the special case of halogen bonding) are reviewed in a united picture that depends on the anisotropic nature of the molecular electrostatic potential around the donor atom. Qualitative descriptions of the effects that lead to these anisotropic distributions are given and examples of the importance of σ-hole bonding in crystal engineering and biological systems are discussed.

Molecular tectonics — Use of urethanes and ureas derived from tetraphenylmethane and tetraphenylsilane to build porous chiral hydrogen-bonded networks

2004 ◽  
Vol 82 (2) ◽  
pp. 386-398 ◽  
Author(s):  
Dominic Laliberté ◽  
Thierry Maris ◽  
James D Wuest
Keyword(s):  
Hydrogen Bonding ◽  
Asymmetric Catalysis ◽  
Crystal Engineering ◽  
Three Dimensional ◽  
Enantiomerically Pure ◽  
X Ray ◽  
Molecular Tectonics ◽  
X Ray Crystallography ◽  
Open Networks ◽  
Hydrogen Bonded

Tetraphenylmethane, tetraphenylsilane, and simple derivatives with substituents that do not engage in hydrogen bonding typically crystallize as close-packed structures with essentially no space available for the inclusion of guests. In contrast, derivatives with hydrogen-bonding groups are known to favor the formation of open networks that include significant amounts of guests. To explore this phenomenon, we synthesized six new derivatives 5a–5e and 6a of tetraphenylmethane and tetraphenylsilane with urethane and urea groups at the para positions, crystallized the compounds, and determined their structures by X-ray crystallography. As expected, all six compounds crystallize to form porous three-dimensional hydrogen-bonded networks. In the case of tetraurea 5e, 66% of the volume of the crystals is accessible to guests, and guests can be exchanged in single crystals without loss of crystallinity. Of special note are: (i) the use of tetrakis(4-isocyanatophenyl)methane (1f) as a precursor for making enantiomerically pure tetraurethanes and tetraureas, including compounds 5b, 5c; and (ii) their subsequent crystallization to give porous chiral hydrogen-bonded networks. Such materials promise to include chiral guests enantioselectively and to be useful in the separation of racemates, asymmetric catalysis, and other applications.Key words: crystal engineering, molecular tectonics, hydrogen bonding, networks, porosity, urethanes, ureas, tetraphenylmethane, tetraphenylsilane.

Crystal Engineering of Hydroxy Group Hydrogen Bonding:  Design and Synthesis of New Diol Lattice Inclusion Hosts

2002 ◽  
Vol 67 (10) ◽  
pp. 3221-3230 ◽  
Author(s):  
Sungho Kim ◽  
Roger Bishop ◽  
Donald C. Craig ◽  
Ian G. Dance ◽  
Marcia L. Scudder
Keyword(s):  
Hydrogen Bonding ◽  
Hydroxy Group ◽  
Crystal Engineering ◽  
Design And Synthesis ◽  
Bonding Design

Strategies for Crystal Engineering of Polar Solids

1993 ◽  
Vol 328 ◽  
Author(s):  
Mike Zaworotko ◽  
S. Subramanian ◽  
L. R. Macgillivray
Keyword(s):  
Hydrogen Bonding ◽  
Hydrogen Bonds ◽  
Crystal Engineering ◽  
Organic Cation ◽  
Polar Materials ◽  
Structural Analogues ◽  
Cubane Cluster ◽  
Self Assembled ◽  
Hydrogen Bonded

ABSTRACTCrystal engineering has been invoked to design structural analogues of two prototypal SHG active solids, p-nitroaniline (pNA) and potassium dihydrogenphosphate (KDP). pNA exists as linear polar strands because of head-to-tail hydrogen bonding between adjacent molecules whereas KDP is a self-assembled hydrogen bonded diamondoid network that becomes polar when the hydrogen bonds align. We detail preparation and crystallographic characterization of two classes of multicomponent solid, organic cation hydrogen sulfates and cocrystals of the cubane cluster [M (CO)3(μ3-OH)]4, which structurally mimic pNA and KDP, respectively. Several of the Multi-component solids are polar and they represent a generic approach to designing new polar materials since one component can be changed without altering the basic architecture within the crystal.

Sign in / Sign up

Export Citation Format

Share Document