Synthesis and characterization of nano-sized LiFePO4cathode materials prepared by a citric acid-based sol–gel route

2004 ◽  
Vol 14 (17) ◽  
pp. 2690-2695 ◽  
Author(s):  
Kuei-Feng Hsu ◽  
Sun-Yuan Tsay ◽  
Bing-Joe Hwang
2009 ◽  
Vol 67 ◽  
pp. 227-232 ◽  
Author(s):  
Gurpreet Singh ◽  
Amrish Panwar ◽  
Anjan Sil ◽  
Sudipto Ghosh

Nanocrystalline LiMn2O4 powder was synthesized by sol-gel method using citric acid as a chelating agent. The powders were characterized by X-ray diffraction (XRD), Field emission scanning electron microscopy (FESEM), Differential scanning calorimetry (DSC), Differential thermal analysis (DTA), Impedance spectroscopy (IS) and Electrochemical measurements. The powder particles having slight agglomeration characteristics were found to have prismatic morphology and a wider size distribution from 50 nm to 200 nm, which provides good packing density of the material. The electrical conductivity of the powder at room temperature is in the order of ~10-5 S/cm. The structural stability of LiMn2O4 cubic spinel over the temperature range of battery operation was assessed. Electrochemical performance of the material shows a discharge capacity of ~130 mAh/gm.


2019 ◽  
Vol 35 (3) ◽  
pp. 927-937
Author(s):  
Kayode Akinlolu ◽  
Abimbola Adebisi ◽  
Bamgboye Omolara ◽  
Ogunniran Kehinde

A series of barium doped LaMnO3 perovskite nano catalysts were synthesized using the citric acid sol gel method. The prepared nano catalysts were characterized using the various characterization techniques such as XRD, ICPAES, FTIR, SEM, HRTEM, TPR and BET. The Xrd results showed the purity of the prepared catalyst as no segregated phases were observed and also confirming the crystallinity of the prepared catalyst. The surface area achieved in this experiment presented one of the highest reported in literature. The doping of the perovskite catalysts helps in increasing the surface area. The ICPAES results shows the efficiency of the preparation method adopted. The catalytic evaluation shows that upon introduction of Ba into the perovskite structure, the catalytic performance of the catalyst were greatly increased with LBM3 giving the lowest T50 at 550°C


2002 ◽  
Vol 126 (2) ◽  
pp. 161-165 ◽  
Author(s):  
Junying Zhang ◽  
Zhongtai Zhang ◽  
Zilong Tang ◽  
Zishan Zheng ◽  
Yuanhua Lin

2014 ◽  
Vol 121 ◽  
pp. 20-29 ◽  
Author(s):  
Tim Van Gestel ◽  
Felix Hauler ◽  
Martin Bram ◽  
Wilhelm A. Meulenberg ◽  
Hans Peter Buchkremer

2003 ◽  
Vol 800 ◽  
Author(s):  
Brady J. Clapsaddle ◽  
Lihua Zhao ◽  
Alex E. Gash ◽  
Joe H. Satcher ◽  
Kenneth J. Shea ◽  
...  

ABSTRACTIn the field of composite energetic materials, properties such as ingredient distribution, particle size, and morphology, affect both sensitivity and performance. Since the reaction kinetics of composite energetic materials are typically controlled by the mass transport rates between reactants, one would anticipate new and potentially exceptional performance from energetic nanocomposites. We have developed a new method of making nanostructured energetic materials, specifically explosives, propellants, and pyrotechnics, using sol-gel chemistry. A novel sol-gel approach has proven successful in preparing metal oxide/silicon oxide nanocomposites in which the metal oxide is the major component. Two of the metal oxides are tungsten trioxide and iron(III) oxide, both of which are of interest in the field of energetic materials. Furthermore, due to the large availability of organically functionalized silanes, the silicon oxide phase can be used as a unique way of introducing organic additives into the bulk metal oxide materials. As a result, the desired organic functionality is well dispersed throughout the composite material on the nanoscale. By introducing a fuel metal into the metal oxide/silicon oxide matrix, energetic materials based on thermite reactions can be fabricated. The resulting nanoscale distribution of all the ingredients displays energetic properties not seen in its microscale counterparts due to the expected increase of mass transport rates between the reactants. The synthesis and characterization of these metal oxide/silicon oxide nanocomposites and their performance as energetic materials will be discussed.


Sign in / Sign up

Export Citation Format

Share Document