Atomic-absorption determination of bismuth in complex nickel-base alloys by generation of its covalent hydride

The Analyst ◽  
1976 ◽  
Vol 101 (1205) ◽  
pp. 672 ◽  
Author(s):  
J. E. Drinkwater
Keyword(s):  
Atomic Absorption ◽  
Atomic Absorption Determination ◽  
Absorption Determination ◽  
Nickel Base ◽  
Complex Nickel

Atomic absorption determination of Hg (II), Cd (II), and As (III) in natural and waste water after preliminary group preconcentration

2019 ◽  
Vol 85 (2) ◽  
pp. 12-16
Author(s):  
I. V. Saunina ◽  
E. N. Gribanov ◽  
E. R. Oskotskaya
Keyword(s):  
Waste Water ◽  
Atomic Absorption ◽  
High Sensitivity ◽  
Distribution Coefficients ◽  
Neutral Medium ◽  
Atomic Absorption Determination ◽  
Absorption Determination ◽  
Relative Standard ◽  
Preliminary Group

The sorption of Hg (II), Cd (II), and As (III) by natural aluminosilicate is studied. It is shown that the mineral absorbs those toxicants in a rather wide pH range, quantitative extraction of analytes being achieved in a neutral or close to neutral medium (pH values range within 7.0 - 8.0; 6.3 - 7.5; 7.4 - 8.5 for Hg (II), As (III), and Cd (II), respectively). The effect of the time of phase contact on the degree of extraction of elements is shown. The sorption capacity of the mineral in optimal conditions of the medium acidity (0.06 mmol/g for mercury, 0.31 mmol/g for cadmium, and 0.52 mmol/g for arsenic) is determined. The distribution coefficients attain values of aboutnX 103-nX 104. A new combined method for determination of Hg (II), Cd (II), and As (III) in natural and waste water is developed and tested. The method consists in a preliminary group sorption concentration of the analytes by aluminosilicate, desorption of the analytes from the surface of the mineral and their subsequent atomic absorption determination. The correctness of the method is verified in analysis of spiked samples. The method is easy to use and exhibits high sensitivity, reproducibility and accuracy of analyte determination. The relative standard deviation does not exceed 0.13. Economic availability and possibility of using domestic sorption materials are the important advantages of the proposed procedure which can be used in the practice of laboratories monitoring the quality and safety of environmental objects.

Comparative Spectrophotometric and Atomic Absorption Determination of Iron Content in Wheat Flour

2007 ◽  
Vol 7 (2) ◽  
pp. 451-453 ◽  
Author(s):  
Seyed Jalal Hoss ◽  
Gholamali Bagheri . ◽  
Mohammad Gholipoor . ◽  
Hassan Mokarami .
Keyword(s):  
Atomic Absorption ◽  
Wheat Flour ◽  
Iron Content ◽  
Atomic Absorption Determination ◽  
Absorption Determination

Determination of Arsenic and Selenium in Whole Fish by Continuous-Flow Hydride Generation Atomic Absorption Spectrophotometry

1989 ◽  
Vol 72 (3) ◽  
pp. 484-486
Author(s):  
William G Brumbaugh ◽  
Michael J Walther
Keyword(s):  
Atomic Absorption ◽  
Continuous Flow ◽  
Hydride Generation ◽  
Atomic Absorption Spectrophotometry ◽  
Atomic Absorption Determination ◽  
Absorption Determination ◽  
Relative Standard ◽  
Wet Chemical ◽  
High Concentrations

Abstract A combined wet chemical and dry ash digestion and use of a continuous- flow hydride generator coupled with a flame-heated quartz cell enabled the simple, precise, and highly automated atomic absorption determination of arsenic and selenium in tissues of whole fish. Percent relative standard deviation averaged 4% for each element; method detection limits (μg/g dry wt) were about 0.06 for arsenic and 0.04 for selenium. Digestion of samples proceeded with little operator attention and without perchloric acid. Analysis for arsenic as As(V) simplified sample preparation but care had to be exercised to avoid interferences from high concentrations of selenium.

Sign in / Sign up

Export Citation Format

Share Document