Robust free-standing nanomembranes of organic/inorganic interpenetrating networks

2006 ◽  
Vol 5 (6) ◽  
pp. 494-501 ◽  
Author(s):  
Richard Vendamme ◽  
Shin-Ya Onoue ◽  
Aiko Nakao ◽  
Toyoki Kunitake
Keyword(s):  
Interpenetrating Networks ◽  
Free Standing

Thermal relaxation in combination with fiberglass confined interpenetrating networks: a key calcination process for as-desired free standing metal oxide nanofibrous membranes

RSC Advances ◽  
2016 ◽  
Vol 6 (90) ◽  
pp. 86798-86807 ◽  
Author(s):  
Nakarin Subjalearndee ◽  
Varol Intasanta
Keyword(s):  
Metal Oxide ◽  
Thermal Relaxation ◽  
Solar Light ◽  
Interpenetrating Networks ◽  
Free Standing ◽  
Calcination Process ◽  
Nanofibrous Membranes ◽  
Model Subject

Using Pd/Pt-decorated solar light active ZnWO4/mixed-phased TiO2 nanofibers as a model subject, we investigate the prerequisites for the construction of mechanically stable metal oxide nanofibrous membranes.

Triply-periodic nanostructures in surfactant, block copolymer, and biomembrane systems, and simulation of TEMs

1993 ◽  
Vol 51 ◽  
pp. 884-885
Author(s):  
David M. Anderson ◽  
Tomas Landh
Keyword(s):  
Liquid Crystalline ◽  
Diblock Copolymers ◽  
Cubic Phase ◽  
List Type ◽  
Interpenetrating Networks ◽  
Triply Periodic ◽  
Wide Range ◽  
Bicontinuous Cubic ◽  
Phase Liquid ◽  
Dividing Surface

First discovered in surfactant-water liquid crystalline systems, so-called ‘bicontinuous cubic phases’ have the property that hydropnilic and lipophilic microdomains form interpenetrating networks conforming to cubic lattices on the scale of nanometers. Later these same structures were found in star diblock copolymers, where the simultaneous continuity of elastomeric and glassy domains gives rise to unique physical properties. Today it is well-established that the symmetry and topology of such a morphology are accurately described by one of several triply-periodic minimal surfaces, and that the interface between hydrophilic and hydrophobic, or immiscible polymer, domains is described by a triply-periodic surface of constant, nonzero mean curvature. One example of such a dividing surface is shown in figure 5.The study of these structures has become of increasing importance in the past five years for two reasons:1)Bicontinuous cubic phase liquid crystals are now being polymerized to create microporous materials with monodispersed pores and readily functionalizable porewalls; figure 3 shows a TEM from a polymerized surfactant / methylmethacrylate / water cubic phase; and2)Compelling evidence has been found that these same morphologies describe biomembrane systems in a wide range of cells.

Body balance in a free-standing position in road and off-road cyclists

2014 ◽  
Vol 6 (4) ◽  
Author(s):  
Paulina Hebisz ◽  
Rafal Hebisz ◽  
Marek Zaton
Keyword(s):  
Sagittal Plane ◽  
Standing Position ◽  
The Body ◽  
Free Standing ◽  
Body Balance ◽  
Eyes Closed ◽  
Road Cycling ◽  
Progressive Exercise ◽  
Before And After ◽  
Road Cyclists

AbstractBackground: The purpose of this study was to compare body balance in road and off-road cyclists, immediately before and after the racing season.Material/Methods: Twenty individuals participated in the study and they were divided into two groups: specialists in road-cycling (n = 10) and in off-road cycling (n = 10). Immediately before and after the five-month racing season stabilographic trials were carried out (at rest and after progressive exercise). In assessing body balance the distance and velocity of the centre shifts (in the anterior-posterior and left-right direction) were analysed. The tests were performed with the cyclists’ eyes open, eyes closed, and in feedback.Results: After the racing season, in the off-road cyclists’ group, distance and velocity of the centre of pressure shifts increased after a progressive exercise.Conclusions: In the off-road cyclists’ group the balance of the body in the sagittal plane deteriorated after the racing season. Moreover, after the racing season off-road cyclists were characterized by a worse balance of the body, compared to road cyclists

Wrinkling Poly(trimethylene 2,5-Furanoate) Free-standing Films: Nanostructure Formation and Physical Properties

2020 ◽  
Author(s):  
Michelina Soccio ◽  
Nadia Lotti ◽  
Andrea Munari ◽  
Esther Rebollar ◽  
Daniel E Martínez-Tong
Keyword(s):  
Irradiation Time ◽  
Polymer Surface ◽  
Laser Source ◽  
Free Standing ◽  
Force Microscopy ◽  
Nanostructure Formation ◽  
Physicochemical Changes ◽  
Angle Measurements ◽  
Atomic Force ◽  
Contact Angle Measurements

<p>Nanostructured wrinkles were developed on fully bio-based poly(trimethylene furanoate) (PTF) films by using the technique of Laser Induced Periodic Surface Structures (LIPSS). We investigated the effect of irradiation time on wrinkle formation using an UV pulsed laser source, at a fluence of 8 mJ/cm2. It was found that the pulse range between 600 and 4800 pulses allowed formation of periodic nanometric ripples. The nanostructured surface was studied using a combined macro- and nanoscale approach. We evaluated possible physicochemical changes taking place on the polymer surface after irradiation by infrared spectroscopy, contact angle measurements and atomic force microscopy. The macroscopic physicochemical properties of PTF showed almost no changes after nanostructure formation, differently from the results previously found for the terephthalic counterparts, as poly(ethyleneterephthalate), PET, and poly(trimethyleneterephthalate), PTT. The surface mechanical properties of the nanostructured PTF were found to be improved, as evidenced by nanomechanical force spectroscopy measurements. In particular, an increased Young’s modulus and higher stiffness for the nanostructured sample were measured. <br></p>

Supramolecular Assembly of U(IV) Clusters and Superatoms

2020 ◽  
Author(s):  
Ian Colliard ◽  
Gregory Morrosin ◽  
Hans-Conrad zur Loye ◽  
May Nyman
Keyword(s):  
Quantum Dots ◽  
Supramolecular Assembly ◽  
Emergent Properties ◽  
Organic Media ◽  
Body Centered Cubic ◽  
Cluster Anions ◽  
Charge Balance ◽  
Interpenetrating Networks ◽  
Hierarchical Assembly ◽  
Two Parameters

Superatoms are nanometer-sized molecules or particles that can form ordered lattices, mimicking their atomic counterparts. Hierarchical assembly of superatoms gives rise to emergent properties in superlattices of quantum-dots, p-block clusters, and fullerenes. Here, we introduce a family of uranium-oxysulfate cluster anions whose hierarchical assembly in water is controlled by two parameters; acidity and the countercation. In acid, larger Ln<sup>III</sup> (Ln=La-Ho) link hexamer (U<sub>6</sub>) oxoclusters into body-centered cubic frameworks, while smaller Ln<sup>III</sup> (Ln=Er-Lu &Y) promote linking of fourteen U<sub>6</sub>-clusters into hollow superclusters (U<sub>84</sub> superatoms). U<sub>84</sub> assembles into superlattices including cubic-closest packed, body-centered cubic, and interpenetrating networks, bridged by interstitial countercations, and U<sub>6</sub>-clusters. Divalent transition metals (TM=Mn<sup>II </sup>and Zn<sup>II</sup>), with no added acid, charge-balance and promote the fusion of 10 U<sub>6</sub> and 10 U-monomers into a wheel–shaped cluster (U<sub>70</sub>). Dissolution of U<sub>70</sub> in organic media reveals (by small-angle Xray scattering) that differing supramolecular assemblies are accessed, controlled by TM-linking of U<sub>70</sub>-clusters. <br>

Ultrastrong, Free-Standing and Large Nanofilms of Pyrenearamid

2019 ◽  
Author(s):  
Amalia Rapakousiou ◽  
Alejandro López-moreno ◽  
Belén Nieto-Ortega ◽  
M. Mar Bernal ◽  
Miguel A. Monclús ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Building Block ◽  
Aromatic Polyamide ◽  
Free Standing ◽  
Spatial Confinement ◽  
Polymeric Structure ◽  
Reduced Modulus ◽  
Organizational Arrangement ◽  
Polycyclic Aromatic ◽  
Nanoscale Building Block

We introduce poly(1,6-pyrene terephthalamide) polymer (PPyrTA) as an aromatic polyamide analogue of poly(p-phenylene terephthalamide) (PPTA), also known as Kevlar®. This work shows that the incorporation of polycyclic aromatic pyrene moieties improves drastically the mechanical properties of the polymeric structure, increasing elastic nanoindentation-determined modulus and hardness by factors of 1.9 and 4.3, respectively. Liquid deprotonated dispersions of PPyrTA nanofibers were used as nanoscale building block for producing large-surface, free-standing polymer macroscopic nanofilms. This 2D assembly leads to further significant improvements in reduced modulus and hardness (more than twice) compared to the starting polymer macroscale fibres, due to a better re-organizational arrangement of the PPyrTA nanofibers in the nanofilms, formed under 2D spatial confinement.

Sign in / Sign up

Export Citation Format

Share Document