Distribution of Copper Ions between an Aqueous Phase and a Toluene Phase containing Cyclohexanone Oxime

Nature ◽  
1966 ◽  
Vol 212 (5063) ◽  
pp. 748-749 ◽  
Author(s):  
W. J. HAFFENDEN ◽  
G. J. LAWSON
Keyword(s):  
Aqueous Phase ◽  
Copper Ions ◽  
Cyclohexanone Oxime

The Effect of Copper Ions on Clot Lysis Time in the Fibrinolytic Assay of Streptokinase

1965 ◽  
Vol 13 (02) ◽  
pp. 477-483
Author(s):  
Alwin B. Bogert
Keyword(s):  
Copper Ions ◽  
Borate Buffer ◽  
Fibrinolytic System ◽  
Clot Lysis ◽  
Distilled Water ◽  
Naturally Occurring ◽  
Lysis Time ◽  
Low Levels ◽  
Effect Of Copper ◽  
Clot Lysis Time

SummaryExperiments were conducted to determine why different lots of Borate Buffer reagent affect the clot lysis times obtained in the fibrinolytic assay of Streptokinase. Minerals naturally occurring in distilled water were screened individually to determine their influence on lysis. Copper was found to have a very pronounced effect in this regard on the fibrinolytic system in that low levels reduce the lysis time and high levels increase it.

The role of copper ions in hydrogen peroxide bleaching: Their origin, removal, and effect on pulp quality

TAPPI Journal ◽  
2012 ◽  
Vol 11 (7) ◽  
pp. 37-46 ◽  
Author(s):  
PEDRO E.G. LOUREIRO ◽  
SANDRINE DUARTE ◽  
DMITRY V. EVTUGUIN ◽  
M. GRAÇA V.S. CARVALHO
Keyword(s):  
Hydrogen Peroxide ◽  
Copper Ions ◽  
Peroxide Bleaching ◽  
Metals Removal ◽  
Peroxide Decomposition ◽  
Equipment Corrosion ◽  
And Performance ◽  
And Control ◽  
Main Effects

This study puts particular emphasis on the role of copper ions in the performance of hydrogen peroxide bleaching (P-stage). Owing to their variable levels across the bleaching line due to washing filtrates, bleaching reagents, and equipment corrosion, these ions can play a major role in hydrogen peroxide decomposition and be detrimental to polysaccharide integrity. In this study, a Cu-contaminated D0(EOP)D1 prebleached pulp was subjected to an acidic washing (A-stage) or chelation (Q-stage) before the alkaline P-stage. The objective was to understand the isolated and combined role of copper ions in peroxide bleaching performance. By applying an experimental design, it was possible to identify the main effects of the pretreatment variables on the extent of metals removal and performance of the P-stage. The acid treatment was unsuccessful in terms of complete copper removal, magnesium preservation, and control of hydrogen peroxide consumption in the following P-stage. Increasing reaction temperature and time of the acidic A-stage improved the brightness stability of the D0(EOP)D1AP bleached pulp. The optimum conditions for chelation pretreatment to maximize the brightness gains obtained in the subsequent P-stage with the lowest peroxide consumption were 0.4% diethylenetriaminepentaacetic acid (DTPA), 80ºC, and 4.5 pH.

Aqueous Phase Diffusion in Crystalline Rock

1981 ◽  
Vol 11 ◽  
Author(s):  
M.H. Bradbury ◽  
D. Lever ◽  
D. Kinsey
Keyword(s):  
Radioactive Waste ◽  
Aqueous Phase ◽  
Water Movement ◽  
Degradation Products ◽  
Crystalline Rock ◽  
Crystalline Rocks ◽  
Radionuclide Transport ◽  
Fracture Networks ◽  
Phase Diffusion ◽  
Main Factors

One of the options being considered for the disposal of radioactive waste is deep burial in crystalline rocks such as granite. It is generally recognised that in such rocks groundwater flows mainly through the fracture networks so that these will be the “highways” for the return of radionuclides to the biosphere. The main factors retarding the radionuclide transport have been considered to be the slow water movement in the fissures over the long distances involved together with sorption both in man-made barriers surrounding the waste, and onto rock surfaces and degradation products in the fissures.

Assessment of Reliability of cap layers used in Cu-Black DiamondTM Interconnects

2003 ◽  
Vol 766 ◽  
Author(s):  
Ahila Krishnamoorthy ◽  
N.Y. Huang ◽  
Shu-Yunn Chong
Keyword(s):  
Dielectric Layer ◽  
Dielectric Breakdown ◽  
Copper Ions ◽  
Dielectric Strength ◽  
Time Dependent ◽  
Breakdown Field ◽  
Field Range ◽  
Time Dependent Dielectric Breakdown ◽  
Voltage Ramp ◽  
Low K

AbstractBlack DiamondTM. (BD) is one of the primary candidates for use in copper-low k integration. Although BD is SiO2 based, it is vastly different from oxide in terms of dielectric strength and reliability. One of the main reliability concerns is the drift of copper ions under electric field to the surrounding dielectric layer and this is evaluated by voltage ramp (V-ramp) and time dependent dielectric breakdown (TDDB). Metal 1 and Metal 2 intralevel comb structures with different metal widths and spaces were chosen for dielectric breakdown studies. Breakdown field of individual test structures were obtained from V-ramp tests in the temperature range of 30 to 150°C. TDDB was performed in the field range 0.5 – 2 MV/cm. From the leakage between combs at the same level (either metal 1 or metal 2) Cu drift through SiC/BD or SiN/BD interface was characterized. It was found that Cu/barrier and barrier/low k interfaces functioned as easy paths for copper drift thereby shorting the lines. Cu/SiC was found to provide a better interface than Cu/SiN.

Liquid-liquid extraction of succinate using a dicopper cryptate

2020 ◽  
Author(s):  
Riccardo Mobili ◽  
Sonia La Cognata ◽  
Francesca Merlo ◽  
Andrea Speltini ◽  
Massimo Boiocchi ◽  
...  
Keyword(s):  
Aqueous Phase ◽  
Visible Spectrum ◽  
Tca Cycle ◽  
Residual Concentration ◽  
Waste Products ◽  
Liquid Liquid Extraction ◽  
The Tca Cycle ◽  
Quantitative Extraction ◽  
Uv Visible

<div> <p>The extraction of the succinate dianion from a neutral aqueous solution into dichloromethane is obtained using a lipophilic cage-like dicopper(II) complex as the extractant. The quantitative extraction exploits the high affinity of the succinate anion for the cavity of the azacryptate. The anion is effectively transferred from the aqueous phase, buffered at pH 7 with HEPES, into dichloromethane. A 1:1 extractant:anion adduct is obtained. Extraction can be easily monitored by following changes in the UV-visible spectrum of the dicopper complex in dichloromethane, and by measuring the residual concentration of succinate in the aqueous phase by HPLC−UV. Considering i) the relevance of polycarboxylates in biochemistry, as e.g. normal intermediates of the TCA cycle, ii) the relevance of dicarboxylates in the environmental field, as e.g. waste products of industrial processes, and iii) the recently discovered role of succinate and other dicarboxylates in pathophysiological processes including cancer, our results open new perspectives for research in all contexts where selective recognition, trapping and extraction of polycarboxylates is required. </p> </div>

A method for selective separation of scandium (III) from yttrium and a number of rare-earth elements for its subsequent determination

2018 ◽  
Vol 84 (11) ◽  
pp. 23-27
Author(s):  
M. I. Degtev ◽  
A. A. Yuminova ◽  
A. S. Maksimov ◽  
A. P. Medvedev
Keyword(s):  
Rare Earth ◽  
Aqueous Phase ◽  
Selective Isolation ◽  
Optimum Ratio ◽  
Extraction Condition ◽  
Sulfosalicylic Acid ◽  
Salting Out ◽  
Subsequent Determination ◽  
Toxic Organic Solvents ◽  
Metal Ions Extraction

The possibility of using an aqueous stratified system of antipyrine — sulfosalicylic acid — water for the selective isolation of scandium macro- and microquantities for subsequent determination is studied. The proposed extraction system eliminates the usage of toxic organic solvents. The organic phase with a volume of 1.2 to 2.0 ml, resulting from delamination of the aqueous phase containing antipyrine and sulfosalicylic acid is analysed to assess the possibility of using such systems for metal ions extraction. Condition necessary for the formation of such a phase were specified: the ratio of the initial components, their concentration, presence of inorganic salting out agents. The optimum ratio of antipyrine to sulfosalicylic acid is 2:1 at concentrations of 0.6 and 0.3 mol/liter in a volume of the aqueous phase of 10 ml. The obtained phase which consists of antipyrinium sulfosalicylate, free antipyrine and water, quantitatively extracts macro- and microquantities of scandium at pH = 1.54. Macro- and microquantities of yttrium, terbium, lanthanum, ytterbium and gadolinium are not extracted under the aforementioned conditions thus providing selective isolation of scandium from the bases containing yttrium, ytterbium, terbium, lanthanum, and gadolinium.

Sign in / Sign up

Export Citation Format

Share Document