An investigation of the responses made in learning a multiple choice maze.

1931 ◽  
Vol 42 (2) ◽  
pp. i-61 ◽  
Author(s):  
Frederick Hillis Lumley
Keyword(s):  
Multiple Choice ◽  
Made In

Personality, expectations, and response strategies in multiple‐choice question examinations in university students: a test of Gray's hypotheses

2004 ◽  
Vol 18 (1) ◽  
pp. 45-59 ◽  
Author(s):  
César Ávila ◽  
Rafael Torrubia
Keyword(s):  
Multiple Choice ◽  
General Hypothesis ◽  
Response Strategies ◽  
Appetitive Motivation ◽  
Correction For Guessing ◽  
Meta Analyses ◽  
Aversive Motivation ◽  
Omission Errors ◽  
Sensitivity To Punishment ◽  
Made In

The relation between personality and type of error made in multiple‐choice examinations when correction for guessing is applied was investigated across two studies. Our general hypothesis was that disinhibited subjects (those scoring high on the Sensitivity to Reward (SR) scale and/or low on the Sensitivity to Punishment (SP) scale) would make more incorrect responses and fewer omission errors (blanks) than inhibited subjects (those with high SP and/or low SR scores). The meta‐analyses of 19 examinations in study 1 confirmed our hypotheses for SP, SR, and extraversion. Regression analyses on effect sizes revealed that SP differences were obtained in examinations with low marks, whereas SR differences were obtained in examinations with more responses and fewer questions. Study 2 showed that a low‐mark expectation increased omissions in high‐SP subjects, whereas a high‐mark expectation increased incorrect responses in high‐SR subjects. These results suggest two different mechanisms mediating inhibition/disinhibition: one associated with aversive motivation, and the other with appetitive motivation. Copyright © 2003 John Wiley & Sons, Ltd.

scholarly journals De vraagstelling in volksraadplegingen en referenda

Res Publica ◽  
2000 ◽  
Vol 42 (4) ◽  
pp. 547-573
Author(s):  
Jaak Billiet
Keyword(s):  
Survey Research ◽  
Multiple Choice ◽  
Actual State ◽  
Multiple Choice Questions ◽  
Response Scale ◽  
Question Wording ◽  
Response Sets ◽  
Selection Of ◽  
Made In

In the domain of survey research, it is well known and documented that the structure, wording, and context of questions may affect the distributions of the responses to choice questions. Surprisingly, the application of the knowledge about these effects is not often made in the domain of referendums. Only few studies deal with the effects of question characteristics in referendums, although in the field, there are many discussions about the results obtained by problematic questions.  In this study, a number of wording effects that can be expected in referendums are discussed in the context of the actual state of theory and knowledge in the research on question wording effects in surveys. Some are well known and others are new, but also very relevant. The expected problems deal with: the choice between real alternatives; the decision about the majority in the case of multiple choice questions; the ambiguity in the choice between "yes" and "no"; the bidden response scale behind "yes-no" questions and the selection of the of verbs or qualifiers; the use of"double barrelled questions"; the suggestive wordings in the question text or in the introduction; the context of the questions when several questions are asked response sets. The importance and seriousness of each ofthese effects is evaluated, and reflections are made on the quality of the questions in referendums. Consequently suggestions are made about the kind of questions that can be used in referendums.

scholarly journals Attributing Social Meaning to Animated Shapes: A New Experimental Study of Apparent Behavior

2019 ◽  
Author(s):  
Adrianna Ratajska ◽  
Matt Brown ◽  
Christopher Chabris
Keyword(s):  
Experimental Study ◽  
Social Cognition ◽  
Social Intelligence ◽  
Multiple Choice ◽  
Original Video ◽  
Social Meaning ◽  
Black And White ◽  
Different Types ◽  
Social Attributions ◽  
Made In

In 1944 Heider and Simmel reported that observers could perceive simple animated geometric shapes as characters with emotions, intentions, and other social attributes. This work has been cited over 3000 times and has had wide and ongoing influence on the study of social cognition and social intelligence. However, many researchers in this area have continued to use the original Heider and Simmel black-and-white video. We asked whether the original findings could be reproduced 75 years later by creating 32 new colored animated shape videos designed to depict various social plots and testing whether they can evoke similar spontaneous social attributions. Participants (N = 66) viewed our videos and were asked to write narratives which we coded for indicia of different types of social attributions. Consistent with Heider and Simmel, we found that participants spontaneously attributed social meaning to the videos. We observed that responses to our videos were also similar to responses to the original video reported by Klin (2000). Participants varied in how many social attributions they made in response to our videos, and our 32 videos varied in how much they elicited such responses. Our set of animated shape videos is freely available online for all researchers to use and forms the basis of a multiple-choice assessment of social intelligence (Brown et al., 2019).

Spectrophotometric measurements of objective-prism spectra

1966 ◽  
Vol 24 ◽  
pp. 118-119
Author(s):  
Th. Schmidt-Kaler
Keyword(s):  
Progress Report ◽  
Two Dimensional ◽  
Objective Prism ◽  
Made In

I should like to give you a very condensed progress report on some spectrophotometric measurements of objective-prism spectra made in collaboration with H. Leicher at Bonn. The procedure used is almost completely automatic. The measurements are made with the help of a semi-automatic fully digitized registering microphotometer constructed by Hög-Hamburg. The reductions are carried out with the aid of a number of interconnected programmes written for the computer IBM 7090, beginning with the output of the photometer in the form of punched cards and ending with the printing-out of the final two-dimensional classifications.

Surface Structure in Microtomed Sections Caused by Glass and Diamond Knives

1971 ◽  
Vol 29 ◽  
pp. 456-457
Author(s):  
J. Temple Black ◽  
William G. Boldosser
Keyword(s):  
Plastic Deformation ◽  
Epoxy Resin ◽  
Carbon Coating ◽  
Surface Damage ◽  
Body Angle ◽  
Normal Manner ◽  
Bottom Side ◽  
Cutting Direction ◽  
Made In ◽  
Diamond Knife

Ultramicrotomy produces plastic deformation in the surfaces of microtomed TEM specimens which can not generally be observed unless special preparations are made. In this study, a typical biological composite of tissue (infundibular thoracic attachment) infiltrated in the normal manner with an embedding epoxy resin (Epon 812 in a 60/40 mixture) was microtomed with glass and diamond knives, both with 45 degree body angle. Sectioning was done in Portor Blum Mt-2 and Mt-1 microtomes. Sections were collected on formvar coated grids so that both the top side and the bottom side of the sections could be examined. Sections were then placed in a vacuum evaporator and self-shadowed with carbon. Some were chromium shadowed at a 30 degree angle. The sections were then examined in a Phillips 300 TEM at 60kv.Carbon coating (C) or carbon coating with chrom shadowing (C-Ch) makes in effect, single stage replicas of the surfaces of the sections and thus allows the damage in the surfaces to be observable in the TEM. Figure 1 (see key to figures) shows the bottom side of a diamond knife section, carbon self-shadowed and chrom shadowed perpendicular to the cutting direction. Very fine knife marks and surface damage can be observed.

Iron storage sites in the myocardium as revealed by cytohistochemistry

1988 ◽  
Vol 46 ◽  
pp. 394-395
Author(s):  
M. Ashraf ◽  
F. Thompson ◽  
S. Miki ◽  
P. Srivastava
Keyword(s):  
Cardiac Tissue ◽  
Coronary Perfusion ◽  
Intracellular Iron ◽  
Ether Anesthesia ◽  
Intense Staining ◽  
Iron Storage ◽  
Thin Sections ◽  
Rat Hearts ◽  
Cacodylate Buffer ◽  
Made In

Iron is believed to play an important role in the pathogenesis of ischemic injury. However, the sources of intracellular iron in myocytes are not yet defined. In this study we have attempted to localize iron at various cellular sites of the cardiac tissue with the ferrocyanide technique.Rat hearts were excised under ether anesthesia. They were fixed with coronary perfusion with 3% buffered glutaraldehyde made in 0.1 M cacodylate buffer pH 7.3. Sections, 60 μm in thickness, were cut on a vibratome and were incubated in the medium containing 500 mg of potassium ferrocyanide in 49.5 ml H2O and 0.5 ml concentrated HC1 for 30 minutes at room temperature. Following rinses in the buffer, tissues were dehydrated in ethanol and embedded in Spurr medium.The examination of thin sections revealed intense staining or reaction product in peroxisomes (Fig. 1).

Microanalysis of precipitates in a ferritic steel

1978 ◽  
Vol 36 (1) ◽  
pp. 618-619
Author(s):  
J.M. Titchmarsh
Keyword(s):  
Ferritic Steel ◽  
Particle Identification ◽  
Energy Dispersive ◽  
Objective Lens ◽  
Ferritic Steels ◽  
Replica Technique ◽  
X Ray ◽  
Large Numbers ◽  
Scanning Transmission ◽  
Made In

The advances in recent years in the microanalytical capabilities of conventional TEM's fitted with probe forming lenses allow much more detailed investigations to be made of the microstructures of complex alloys, such as ferritic steels, than have been possible previously. In particular, the identification of individual precipitate particles with dimensions of a few tens of nanometers in alloys containing high densities of several chemically and crystallographically different precipitate types is feasible. The aim of the investigation described in this paper was to establish a method which allowed individual particle identification to be made in a few seconds so that large numbers of particles could be examined in a few hours.A Philips EM400 microscope, fitted with the scanning transmission (STEM) objective lens pole-pieces and an EDAX energy dispersive X-ray analyser, was used at 120 kV with a thermal W hairpin filament. The precipitates examined were extracted using a standard C replica technique from specimens of a 2¼Cr-lMo ferritic steel in a quenched and tempered condition.

AEM investigation of ZrO2 solid solution formation in ZrO2/mullite composites

1984 ◽  
Vol 42 ◽  
pp. 408-409
Author(s):  
T. R. Dinger
Keyword(s):  
Solid Solution ◽  
Ion Beam ◽  
Analytical Electron Microscopy ◽  
Transformation Toughening ◽  
Solid Solution Formation ◽  
Solution Formation ◽  
Propagating Crack ◽  
Analytical Electron ◽  
Microcrack Toughening ◽  
Made In

Zirconia (ZrO2) is often added to ceramic compacts to increase their toughness. The mechanisms by which this toughness increase occurs are generally accepted to be those of transformation toughening and microcracking. The mechanism of transformation toughening is based on the presence of metastable tetragonal ZrO2 which transforms to the monoclinic allotrope when stressed by a propagating crack. The decrease in volume which accompanies this transformation effectively relieves the applied stress at the crack tip and toughens the material; microcrack toughening arises from the deflection of a propagating crack around sharply angular inclusions.These mechanisms, however, do not explain the toughness increases associated with the class of composites investigated here. Analytical electron microscopy (AEM) has been used to determine whether solid solution effects could be the cause of this increased toughness. Specimens of a mullite (3Al2O3·2SiO2) + 15 vol. % ZrO2 were prepared by the usual technique of mechanical thinning followed by ion beam milling. All observations were made in a Philips EM400 TEM/STEM microscope fitted with EDXS and EELS spectrometers.

A study of interface sliding at F.C.C.-B.C.C. boundaries in a Cu-Zn alloy

1978 ◽  
Vol 36 (1) ◽  
pp. 422-423
Author(s):  
F. Monchoux ◽  
A. Rocher ◽  
J.L. Martin
Keyword(s):  
Face Centered Cubic ◽  
Creep Tests ◽  
High Voltage Electron Microscopy ◽  
Diffusion Treatment ◽  
Voltage Electron ◽  
The Face ◽  
Face Centered ◽  
Interface Sliding ◽  
Zn Alloy ◽  
Made In

Interphase sliding is an important phenomenon of high temperature plasticity. In order to study the microstructural changes associated with it, as well as its influence on the strain rate dependence on stress and temperature, plane boundaries were obtained by welding together two polycrystals of Cu-Zn alloys having the face centered cubic and body centered cubic structures respectively following the procedure described in (1). These specimens were then deformed in shear along the interface on a creep machine (2) at the same temperature as that of the diffusion treatment so as to avoid any precipitation. The present paper reports observations by conventional and high voltage electron microscopy of the microstructure of both phases, in the vicinity of the phase boundary, after different creep tests corresponding to various deformation conditions.Foils were cut by spark machining out of the bulk samples, 0.2 mm thick. They were then electropolished down to 0.1 mm, after which a hole with thin edges was made in an area including the boundary

Searching for the causes why some of the paintings by Mihaly Munkacsy are darkening

1990 ◽  
Vol 48 (2) ◽  
pp. 204-205
Author(s):  
Imre Pozsgai ◽  
Klara Erdöhalmi-Torok
Keyword(s):  
Electron Beam ◽  
Cross Section ◽  
Polyester Resin ◽  
National Gallery ◽  
X Ray ◽  
Art Historians ◽  
Made In ◽  
Grinding And Polishing

The paintings by the great Hungarian master Mihaly Munkacsy (1844-1900) made in an 8-9 years period of his activity are deteriorating. The most conspicuous sign of the deterioration is an intensive darkening. We have made an attempt by electron beam microanalysis to clarify the causes of the darkening. The importance of a study like this is increased by the fact that a similar darkening can be observed on the paintings by Munkacsy’s contemporaries e.g Courbet and Makart. A thick brown mass the so called bitumen used by Munkacsy for grounding and also as a paint is believed by the art historians to cause the darkening.For this study, paint specimens were taken from the following paintings: “Studio”, “Farewell” and the “Portrait of the Master’s Wife”, all of them are the property of the Hungarian National Gallery. The paint samples were embedded in a polyester resin “Poly-Pol PS-230” and after grinding and polishing their cross section was used for x-ray mapping.

Sign in / Sign up

Export Citation Format

Share Document