Transport of conservative chemical through an unsaturated two-dimensional Miller-similar medium with steady state flow

1996 ◽  
Vol 32 (6) ◽  
pp. 1653-1663 ◽  
Author(s):  
Kurt Roth ◽  
Klaus Hammel
Author(s):  
Ken-ichi Funazaki ◽  
Nozomi Tanaka ◽  
Takahiro Shiba ◽  
Haruyuki Tanimitsu ◽  
Masaaki Hamabe

The study the present authors have been working on is to develop a new method to increase aerodynamic loading of low-pressure turbine airfoils for modern aeroengines to a great extent, which is to achieve drastic reduction of their airfoil counts. For this purpose, this study proposes two-dimensional contouring of the airfoil suction surface as a device to suppress the separation bubble that causes large aerodynamic loss, especially at low Reynolds number condition. The main objective of this paper is to show how and to what extent the surface contouring without any other disturbances affects the suction surface boundary layer accompanying separation bubble. For comparison, rather conventional tripping wire technique is also employed as “local 2D surface contouring” to generate flow disturbances in order to suppress the separation bubble. All measurements are carried out under steady-state flow conditions with low freestream turbulence. It turns out from the detailed experiments and LES analysis that the newly proposed two-dimensional contouring of the airfoil surface can effectively suppress the separation bubble, resulting in significant improvement of cascade aerodynamic performance.


2020 ◽  
Vol 38 (12A) ◽  
pp. 1783-1789
Author(s):  
Jaafar S. Matooq ◽  
Muna J. Ibraheem

 This paper aims to conduct a series of laboratory experiments in case of steady-state flow for the new size 7 ̋ throat width (not presented before) of the cutthroat flume. For this size, five different lengths were adopted 0.535, 0.46, 0.40, 0.325 and 0.27m these lengths were adopted based on the limitations of the available flume. The experimental program has been followed to investigate the hydraulic characteristic and introducing the calibrated formula for free flow application within the discharge ranged between 0.006 and 0.025 m3/s. The calibration result showed that, under suitable operation conditions, the suggested empirical formulas can accurately predict the values of discharge within an error ± 3%.


1996 ◽  
Vol 27 (4) ◽  
pp. 247-254 ◽  
Author(s):  
Zekâi Şen

A simple, approximate but practical graphical method is proposed for estimating the storage coefficient independently from the transmissivity value, provided that quasi-steady state flow data are available from a pumping test. In the past, quasi-steady state flow distance-drawdown data have been used for the determination of transmissivity only. The method is applicable to confined and leaky aquifers. The application of the method has been performed for various aquifer test data available in the groundwater literature. The results are within the practical limits of approximation compared with the unsteady state flow solutions.


2004 ◽  
Author(s):  
J.S. Kim ◽  
Y. Dong ◽  
W.R. Rossen

Sign in / Sign up

Export Citation Format

Share Document