Probing Effective Wetting in Subsurface Systems

2020 ◽  
Vol 47 (5) ◽  
Author(s):  
Chenhao Sun ◽  
James E. McClure ◽  
Peyman Mostaghimi ◽  
Anna L. Herring ◽  
Steffen Berg ◽  
...  
Keyword(s):  
Effective Wetting

Analysis of effective wetting area of a horizontal generator for an absorption heat transformer

2014 ◽  
Vol 62 (2) ◽  
pp. 845-849 ◽  
Author(s):  
Y. Lazcano-Véliz ◽  
J. Siqueiros ◽  
D. Juárez-Romero ◽  
L.I. Morales ◽  
J. Torres-Merino
Keyword(s):  
Effective Wetting ◽  
Heat Transformer

Improved of effective wetting area and film thickness on a concentric helical bank of a generator for an absorption heat transformer

2016 ◽  
Vol 106 ◽  
pp. 1319-1328 ◽  
Author(s):  
Y. Lazcano-Véliz ◽  
J.A. Hernández ◽  
D. Juárez-Romero ◽  
A. Huicochea-Rodríguez ◽  
A. Álvarez-Gallegos ◽  
...  
Keyword(s):  
Film Thickness ◽  
Effective Wetting ◽  
Heat Transformer

Effect of surfactant on casting metalorganic films and writing copper metal patterns

1991 ◽  
Vol 6 (4) ◽  
pp. 760-765 ◽  
Author(s):  
C.T. Lin ◽  
H.Y. Lee ◽  
M.A. Souto
Keyword(s):  
Solvent Mixture ◽  
Direct Writing ◽  
Fraunhofer Diffraction ◽  
Good Adhesion ◽  
Copper Metal ◽  
Amorphous Films ◽  
General Process ◽  
Metal Structures ◽  
Effective Wetting ◽  
Triton X

A highly effective wetting agent and emulsifier, Triton X-100 detergent is introduced to metalorganic solutions. When applied to a substrate, this detergent/metalorganic solution promotes the formation of a uniform spin-on thin film with good adhesion. The precursor, copper formate film, was spin-deposited with a metalorganic solution prepared by a solvent mixture of methanol and Triton X-100 (50:1 by volume). KrF laser (248 nm) direct writing of high-purity copper patterns on glass and polyimide substrates has been achieved. When the laser beam is imaged through a slit device, periodic copper metal structures with a linewidth of ∼2.5 μm are observed, which may be attributed to result from Fraunhofer diffraction. A general process for casting homogeneous amorphous films on substrates from a solution of molecular or ionic metalorganics dissolved in the neutral or charged micelles is proposed.

Genesis of ecotechnology efficiency in the production of dust-forming materials

2019 ◽  
pp. 55-59
Author(s):  
V. N. Makarov ◽  
S.  Ya. Davydov ◽  
N. V. Makarov
Keyword(s):  
Mathematical Model ◽  
Angular Velocity ◽  
Water Consumption ◽  
Dust Particles ◽  
Total Absorption ◽  
Liquid Droplets ◽  
Dust Suppression ◽  
Minimum Diameter ◽  
Dust Composition ◽  
Effective Wetting

A mathematical model of vortex dedusting is proposed. Equations for calculating the magnitude of the reduction in the required energy of the total absorption of dust particles, the effective wetting angle and the minimum diameter of the absorbed dust particles as a function of the angular velocity of rotation of liquid droplets are obtained. It is shown that vortex hydrodusting significantly reduces the size of the dispersed dust composition, water consumption, increasing the efficiency of dust suppression. Ill. 2. Ref. 12.

Photoresponsive superhydrophobic surfaces for effective wetting control

Soft Matter ◽  
2014 ◽  
Vol 10 (45) ◽  
pp. 9187-9192 ◽  
Author(s):  
Shuaijun Pan ◽  
Rui Guo ◽  
Weijian Xu
Keyword(s):  
Superhydrophobic Surfaces ◽  
Effective Wetting
Sign in / Sign up

Export Citation Format

Share Document