Abstract
With the decline of conventional resources, the tight oil reserves in the Daqing oilfield are becoming increasingly important, but measuring relative permeability and determining production forecasts through laboratory core flow tests for tight formations are both difficult and time consuming. Results of laboratory testing are questionable due to the very small pore volume and low permeability of the reservoir rock, and there are challenges in controlling critical parameters during the special core analysis (SCAL) tests. In this paper, the protocol and workflow of a digital rock study for tight sandstones of the Daqing oilfield are discussed. The workflow includes 1) using a combination of various imaging methods to build rock models that are representative of reservoir rocks, 2) constructing digital fluid models of reservoir fluids and injectants, 3) applying laboratory measured wettability index data to define rock-fluid interaction in digital rock models, 4) performing pore-scale modelling to accelerate reservoir characterization and reduce the uncertainty, and 5) performing digital enhanced oil recovery (EOR) tests to analyze potential benefits of different scenarios.
The target formations are tight (0.01 to 5 md range) sandstones that have a combination of large grain sizes juxtaposed against small pore openings which makes it challenging to select an appropriate set of imaging tools. To overcome the wide range of pore and grain scales, the imaging tools selected for the study included high resolution microCT imaging on core plugs and mini-plugs sampled from original plugs, overview scanning electron microscopy (SEM) imaging, mineralogical mapping, and high-resolution SEM imaging on the mini-plugs. High resolution digital rock models were constructed and subsequently upscaled to the plug level to differentiate bedding and other features could be differentiated. Permeability and porosity of digital rock models were benchmarked against laboratory measurements to confirm representativeness. The laboratory measured Amott-Harvey wettability index of restored core plugs was honored and applied to the digital rock models. Digital fluid models were built using the fluid PVT data. A Direct HydroDynamic (DHD) pore-scale flow simulator based on density functional hydrodynamics was used to model multiphase flow in the digital experiments.
Capillary pressure, water-oil, surfactant solution-oil, and CO2-oil relative permeability were computed, as well as primary depletion followed with three-cycle CO2 huff-n-puff, and primary depletion followed with three-cycle surfactant solution huff-n-puff processes. Recovery factors were obtained for each method and resulting values were compared to establish most effective field development scenarios.
The workflow developed in this paper provides fast and reliable means of obtaining critical data for field development design. Capillary pressure and relative permeability data obtained through digital experiments provide key input parameters for reservoir simulation; production scenario forecasts help evaluate various EOR methods. Digital simulations allow the different scenarios to be run on identical rock samples numerous times, which is not possible in the laboratory.
Relative Permeability Scaling From Pore‐Scale Flow Regimes