scholarly journals Sea spray spume droplet production in high wind speeds

2012 ◽  
Vol 39 (16) ◽  
pp. n/a-n/a ◽  
Author(s):  
F. Veron ◽  
C. Hopkins ◽  
E. L. Harrison ◽  
J. A. Mueller
Keyword(s):  
Sea Spray ◽  
High Wind ◽  
Wind Speeds ◽  
Droplet Production

scholarly journals Relationship between Sea Surface Drag Coefficient and Wave State

2021 ◽  
Vol 9 (11) ◽  
pp. 1248
Author(s):  
Jian Shi ◽  
Zhihao Feng ◽  
Yuan Sun ◽  
Xueyan Zhang ◽  
Wenjing Zhang ◽  
...  
Keyword(s):  
Drag Coefficient ◽  
Momentum Flux ◽  
Sea Surface ◽  
Sea Spray ◽  
Wave Age ◽  
High Wind ◽  
Surface Drag ◽  
Wave State ◽  
Wind Speeds ◽  
Strong Winds

The sea surface drag coefficient plays an important role in momentum transmission between the atmosphere and the ocean, which is affected by ocean waves. The total air–sea momentum flux consists of effective momentum flux and sea spray momentum flux. Sea spray momentum flux involves sea surface drag, which is largely affected by the ocean wave state. Under strong winds, the sea surface drag coefficient (CD) does not increase linearly with the increasing wind speed, namely, the increase of CD is inhibited by strong winds. In this study, a sea surface drag coefficient is constructed that can be applied to the calculation of the air–sea momentum flux under high wind speed. The sea surface drag coefficient also considers the influence of wave state and sea spray droplets generated by wave breaking. Specially, the wave-dependent sea spray generation function is employed to calculate sea spray momentum flux. This facilitates the analysis not only on the sensitivity of the sea spray momentum flux to wave age, but also on the effect of wave state on the effective CD (CD, eff) under strong winds. Our results indicate that wave age plays an important role in determining CD. When the wave age is >0.4, CD decreases with the wave age. However, when the wave age is ≤0.4, CD increases with the wave age at low and moderate wind speeds but tends to decrease with the wave age at high wind speeds.

scholarly journals A Review of Parameterizations for Enthalpy and Momentum Fluxes from Sea Spray in Tropical Cyclones

2021 ◽  
Author(s):  
Sydney Sroka ◽  
Kerry Emanuel
Keyword(s):  
Tropical Cyclones ◽  
Critical Role ◽  
Sea Spray ◽  
High Wind ◽  
High Wind Speed ◽  
Wind Speeds ◽  
Crucial Component ◽  
Momentum Fluxes ◽  
Interaction Scheme ◽  
Speed Regime

AbstractThe intensity of tropical cyclones is sensitive to the air-sea fluxes of enthalpy and momentum. Sea spray plays a critical role in mediating enthalpy and momentum fluxes over the ocean’s surface at high wind speeds, and parameterizing the influence of sea spray is a crucial component of any air-sea interaction scheme used for the high wind regime where sea spray is ubiquitous. Many studies have proposed parameterizations of air-sea flux that incorporate the microphysics of sea spray evaporation and the mechanics of sea spray stress. Unfortunately, there is not yet a consensus on which parameterization best represents air-sea exchange in tropical cyclones, and the different proposed parameterizations can yield substantially different tropical cyclone intensities. This paper seeks to review the developments in parameterizations of the sea spray-mediated enthalpy and momentum fluxes for the high wind speed regime and to synthesize key findings that are common across many investigations.

The Influence of wave state and sea spray on drag coefficient from low to high wind speeds

2016 ◽  
Vol 15 (1) ◽  
pp. 41-49 ◽  
Author(s):  
Jian Shi ◽  
Zhong Zhong ◽  
Xunqiang Li ◽  
Guorong Jiang ◽  
Wenhua Zeng ◽  
...  
Keyword(s):  
Drag Coefficient ◽  
Sea Spray ◽  
High Wind ◽  
Wave State ◽  
Wind Speeds

scholarly journals Dependence of Power Characteristics on Savonius Rotor Segmentation

Energies ◽  
2021 ◽  
Vol 14 (10) ◽  
pp. 2912
Author(s):  
Krzysztof Doerffer ◽  
Janusz Telega ◽  
Piotr Doerffer ◽  
Paulina Hercel ◽  
Andrzej Tomporowski
Keyword(s):  
High Wind ◽  
Horizontal Axis Wind Turbine ◽  
Savonius Rotor ◽  
Power Characteristics ◽  
Wind Speeds ◽  
Single Segment ◽  
High Elongation ◽  
Low Wind Speeds ◽  
Number Of Segments ◽  
Rotor Type

Savonius rotors are large and heavy because they use drag force for propulsion. This leads to a larger investment in comparison to horizontal axis wind turbine (HAWT) rotors using lift forces. A simple construction of the Savonius rotor is preferred to reduce the production effort. Therefore, it is proposed here to use single-segment rotors of high elongation. Nevertheless, this rotor type must be compared with a multi-segment rotor to prove that the simplification does not deteriorate the effectiveness. The number of segments affects the aerodynamic performance of the rotor, however, the results shown in the literature are inconsistent. The paper presents a new observation that the relation between the effectiveness of single- and multi-segment rotors depends on the wind velocity. A single-segment rotor becomes significantly more effective than a four-segment rotor at low wind speeds. At high wind speeds, the effectiveness of both rotors becomes similar.

Midlatitude cyclones in convection permitting climate simulations: the added value offered for extreme wind speeds and sting-jets

2021 ◽  
Author(s):  
Colin Manning ◽  
Elizabeth Kendon ◽  
Hayley Fowler ◽  
Nigel Roberts ◽  
Segolene Berthou ◽  
...  
Keyword(s):  
Climate Model ◽  
Surface Wind ◽  
Added Value ◽  
Large Contribution ◽  
High Wind ◽  
Wind Speeds ◽  
Wind Gusts ◽  
Climate Simulations ◽  
Extreme Wind ◽  
Extreme Wind Speeds

<p>Extra-tropical windstorms are one of the costliest natural hazards affecting Europe, and windstorms that develop a phenomenon known as a sting-jet account for some of the most damaging storms. A sting-jet (SJ) is a mesoscale core of high wind speeds that occurs in particular types of cyclones, specifically Shapiro-Keyser (SK) cyclones, and can produce extremely damaging surface wind gusts. High-resolution climate models are required to adequately model SJs and so it is difficult to gauge their contribution to current and future wind risk. In this study, we develop a low-cost methodology to automate the detection of sting jets, using the characteristic warm seclusion of SK cyclones and the slantwise descent of high wind speeds, within pan-European 2.2km convection-permitting climate model (CPM) simulations. Following this, we quantify the contribution of such storms to wind risk in Northern Europe in current and future climate simulations, and secondly assess the added value offered by the CPM compared to a traditional coarse-resolution climate model. This presentation will give an overview of the developed methods and the results of our analysis.</p><p>Comparing with observations, we find that the representation of wind gusts is improved in the CPM compared to ERA-Interim reanalysis data. Storm severity metrics indicate that SK cyclones account for the majority of the most damaging windstorms. The future simulation produces a large increase (>100%) in the number of storms exceeding high thresholds of the storm metric, with a large contribution to this change (40%) coming from windstorms in which a sting-jet is detected. Finally, we see a systematic underestimation in the GCM compared to the CPM in the frequency of extreme wind speeds at 850hPa in the cold sector of cyclones, likely related to better representation of sting-jets and the cold conveyor belt in the CPM. This underestimation is between 20-40% and increases with increasing wind speed above 35m/s. We conclude that the CPM adds value in the representation of severe surface wind gusts, providing more reliable future projections and improved input for impact models.</p>

scholarly journals Testing Water Yield, Efficiency of Different Meshes and Water Quality with a Novel Fog Collector for High Wind Speeds

2018 ◽  
Vol 18 (1) ◽  
pp. 240-253 ◽  
Author(s):  
Christian Schunk ◽  
Peter Trautwein ◽  
Herbert Hruschka ◽  
Ernst Frost ◽  
Leslie Dodson ◽  
...  
Keyword(s):  
Water Quality ◽  
Water Yield ◽  
High Wind ◽  
Yield Efficiency ◽  
Wind Speeds ◽  
Fog Collector

scholarly journals Mass transfer velocity across the breaking air–water interface at extremely high wind speeds

Tellus B ◽  
2013 ◽  
Vol 65 (1) ◽  
pp. 21341 ◽  
Author(s):  
Koji Iwano ◽  
Naohisa Takagaki ◽  
Ryoichi Kurose ◽  
Satoru Komori
Keyword(s):  
Mass Transfer ◽  
Water Interface ◽  
High Wind ◽  
Transfer Velocity ◽  
Wind Speeds ◽  
Air Water Interface

scholarly journals Catch Characteristics of Precipitation Gauges in High-Latitude Regions with High Winds

2006 ◽  
Vol 7 (5) ◽  
pp. 984-994 ◽  
Author(s):  
Konosuke Sugiura ◽  
Tetsuo Ohata ◽  
Daqing Yang
Keyword(s):  
Wind Speed ◽  
High Latitude ◽  
Cold Climate ◽  
Strong Wind ◽  
Blowing Snow ◽  
High Wind ◽  
Wind Speeds ◽  
Solid Precipitation ◽  
High Winds ◽  
Correction Equations

Abstract Intercomparison of solid precipitation measurement at Barrow, Alaska, has been carried out to examine the catch characteristics of various precipitation gauges in high-latitude regions with high winds and to evaluate the applicability of the WMO precipitation correction procedures. Five manual precipitation gauges (Canadian Nipher, Hellmann, Russian Tretyakov, U.S. 8-in., and Wyoming gauges) and a double fence intercomparison reference (DFIR) as an international reference standard have been installed. The data collected in the last three winters indicates that the amount of solid precipitation is characteristically low, and the zero-catch frequency of the nonshielded gauges is considerably high, 60%–80% of precipitation occurrences. The zero catch in high-latitude high-wind regions becomes a significant fraction of the total precipitation. At low wind speeds, the catch characteristics of the gauges are roughly similar to the DFIR, although it is noteworthy that the daily catch ratios decreased more rapidly with increasing wind speed compared to the WMO correction equations. The dependency of the daily catch ratios on air temperature was confirmed, and the rapid decrease in the daily catch ratios is due to small snow particles caused by the cold climate. The daily catch ratio of the Wyoming gauge clearly shows wind-induced losses. In addition, the daily catch ratios are considerably scattered under strong wind conditions due to the influence of blowing snow. This result suggests that it is not appropriate to extrapolate the WMO correction equations for the shielded gauges in high-latitude regions for high wind speed of over 6 m s−1.

Calibration and Cross Validation of Global Ocean Wind Speed Based on Scatterometer Observations

2020 ◽  
Vol 37 (2) ◽  
pp. 279-297 ◽  
Author(s):  
Agustinus Ribal ◽  
Ian R. Young
Keyword(s):  
Wind Speed ◽  
Cross Validation ◽  
Regression Line ◽  
Total Duration ◽  
Global Ocean ◽  
High Wind ◽  
Wind Speeds ◽  
Buoy Data ◽  
Ocean Wind

AbstractGlobal ocean wind speed observed from seven different scatterometers, namely, ERS-1, ERS-2, QuikSCAT, MetOp-A, OceanSat-2, MetOp-B, and Rapid Scatterometer (RapidScat) were calibrated against National Data Buoy Center (NDBC) data to form a consistent long-term database of wind speed and direction. Each scatterometer was calibrated independently against NDBC buoy data and then cross validation between scatterometers was performed. The total duration of all scatterometer data is approximately 27 years, from 1992 until 2018. For calibration purposes, only buoys that are greater than 50 km offshore were used. Moreover, only scatterometer data within 50 km of the buoy and for which the overpass occurred within 30 min of the buoy recording data were considered as a “matchup.” To carry out the calibration, reduced major axis (RMA) regression has been applied where the regression minimizes the size of the triangle formed by the vertical and horizontal offsets of the data point from the regression line and the line itself. Differences between scatterometer and buoy data as a function of time were investigated for long-term stability. In addition, cross validation between scatterometers and independent altimeters was also performed for consistency. The performance of the scatterometers at high wind speeds was examined against buoy and platform measurements using quantile–quantile (Q–Q) plots. Where necessary, corrections were applied to ensure scatterometer data agreed with the in situ wind speed for high wind speeds. The resulting combined dataset is believed to be unique, representing the first long-duration multimission scatterometer dataset consistently calibrated, validated and quality controlled.

Sign in / Sign up

Export Citation Format

Share Document