scholarly journals Assessment of local hydraulic properties from electrical resistivity tomography monitoring of a three-dimensional synthetic tracer test experiment

2011 ◽  
Vol 47 (12) ◽  
Author(s):  
M. Camporese ◽  
G. Cassiani ◽  
R. Deiana ◽  
P. Salandin
2015 ◽  
Vol 2015 ◽  
pp. 1-13 ◽  
Author(s):  
T. Apuani ◽  
G. P. Giani ◽  
M. d’Attoli ◽  
F. Fischanger ◽  
G. Morelli ◽  
...  

The design and execution of consolidation treatment of settled foundations by means of injection of polyurethane expanding resins require a proper investigation of the state of the foundation soil, in order to better identify anomalies responsible for the instability. To monitor the injection process, a procedure has been developed, which involves, in combination with traditional geotechnical tests, the application of a noninvasive, geophysical technique based on the electrical resistivity, which is strongly sensitive to presence of water or voids. Three-dimensional electrical resistivity tomography is a useful tool to produce effective 3D images of the foundation soils before, during, and after the injections. The achieved information allows designing the consolidation scheme and monitoring its effects on the treated volumes in real time. To better understand the complex processes induced by the treatment and to learn how variations of resistivity accompany increase of stiffness, an experiment was carried out in a full-scale test site. Injections of polyurethane expanding resin were performed as in real worksite conditions. Results confirm that the experimented approach by means of 3D resistivity imaging allows a reliable procedure of consolidation, and geotechnical tests demonstrate the increase of mechanical stiffness.


Geomorphology ◽  
2012 ◽  
Vol 177-178 ◽  
pp. 17-25 ◽  
Author(s):  
J.E. Chambers ◽  
P.B. Wilkinson ◽  
D. Wardrop ◽  
A. Hameed ◽  
I. Hill ◽  
...  

Water ◽  
2021 ◽  
Vol 13 (17) ◽  
pp. 2400
Author(s):  
Alex Sendrós ◽  
Mahjoub Himi ◽  
Esmeralda Estévez ◽  
Raúl Lovera ◽  
M. Pino Palacios-Diaz ◽  
...  

The geometry and the hydraulic properties of the unsaturated zone is often difficult to evaluate from traditional soil sampling techniques. Soil samples typically provide only data of the upper layers and boreholes are expensive and only provide spotted information. Non-destructive geophysical methods and among them, electrical resistivity tomography can be applied in complex geological environments such as volcanic areas, where lavas and unconsolidated pyroclastic deposits dominate. They have a wide variability of hydraulic properties due to textural characteristics and modification processes suh as compaction, fracturation and weathering. To characterize the subsurface geology below the golf course of Bandama (Gran Canaria) a detailed electrical resistivity tomography survey has been conducted. This technique allowed us to define the geometry of the geological formations because of their high electrical resistivity contrasts. Subsequently, undisturbed soil and pyroclastic deposits samples were taken in representative outcrops for quantifying the hydraulic conductivity in the laboratory where the parametric electrical resistivity was measured in the field. A statistical correlation between the two variables has been obtained and a 3D model transit time of water infiltration through the vadose zone has been built to assess the vulnerability of the aquifers located below the golf course irrigated with reclaimed water.


2008 ◽  
Vol 35 (10) ◽  
pp. 1047 ◽  
Author(s):  
Terenzio Zenone ◽  
Gianfranco Morelli ◽  
Maurizio Teobaldelli ◽  
Federico Fischanger ◽  
Marco Matteucci ◽  
...  

In this study, we assess the possibility of using ground penetrating radar (GPR) and electrical resistivity tomography (ERT) as indirect non-destructive techniques for root detection. Two experimental sites were investigated: a poplar plantation [mean height of plants 25.7 m, diameter at breast height (dbh) 33 cm] and a pinewood forest mainly composed of Pinus pinea L. and Pinus pinaster Ait. (mean height 17 m, dbh 29 cm). GPR measures were taken using antennas of 900 and 1500 MHz applied in square and circular grids. ERT was previously tested along 2-D lines, compared with GPR sections and direct observation of the roots, and then using a complete 3-D acquisition technique. Three-dimensional reconstructions using grids of electrodes centred and evenly spaced around the tree were used in all cases (poplar and pine), and repeated in different periods in the pine forest (April, June and September) to investigate the influence of water saturation on the results obtainable. The investigated roots systems were entirely excavated using AIR-SPADE Series 2000. In order to acquire morphological information on the root system, to be compared with the GPR and ERT, poplar and pine roots were scanned using a portable on ground scanning LIDAR. In test sections analysed around the poplar trees, GPR with a high frequency antenna proved to be able to detect roots with very small diameters and different angles, with the geometry of survey lines ruling the intensity of individual reflectors. The comparison between 3-D images of the extracted roots obtained with a laser scan data point cloud and the GPR profile proved the potential of high density 3-D GPR in mapping the entire system in unsaturated soil, with a preference for sandy and silty terrain, with problems arising when clay is predominant. Clutter produced by gravel and pebbles, mixed with the presence of roots, can also be sources of noise for the GPR signals. The work performed on the pine trees shows that the shape, distribution and volume of roots system, can be coupled to the 3-D electrical resistivity variation of the soil model map. Geophysical surveys can be a useful approach to root investigation in describing both the shape and behaviour of the roots in the subsoil.


Sign in / Sign up

Export Citation Format

Share Document