scholarly journals Oceanic latent heat fluxes: Consistency with the atmospheric hydrological and energy cycles and general circulation modeling

2007 ◽  
Vol 112 (D6) ◽  
Author(s):  
J. M. Edwards
Keyword(s):  
Latent Heat ◽  
General Circulation ◽  
Heat Fluxes ◽  
Circulation Modeling

Idealized Hot Spot Experiments with a General Circulation Model

2007 ◽  
Vol 20 (5) ◽  
pp. 908-925 ◽  
Author(s):  
Eric D. Maloney ◽  
Adam H. Sobel
Keyword(s):  
Latent Heat ◽  
General Circulation ◽  
Large Scale ◽  
Initial Conditions ◽  
Hot Spot ◽  
Heat Content ◽  
Circulation Model ◽  
Heat Fluxes ◽  
External Parameter ◽  
Large Scale Circulation

Abstract Idealized experiments are conducted using a GCM coupled to a 20-m slab ocean model to examine the short-term response to an initial localized positive equatorial SST anomaly, or “hot spot.” A hot spot is imposed upon an aquaplanet with globally uniform 28°C SST, insolation, and trace gas concentrations designed to mimic tropical warm pool conditions. No boundary condition or external parameter other than the Coriolis parameter varies with latitude. A 15-member ensemble is initiated using random atmospheric initial conditions. A 2°C equatorial warm anomaly is switched on, along with ocean coupling (day 0). Enhanced deep convection rapidly develops near the hot spot, forcing an anomalous large-scale circulation that resembles the linear response of a dry atmosphere to a localized heating, as in the Gill model. Enhanced convection, the anomalous large-scale circulation, and enhanced wind speed peak in amplitude at about day 15. Enhanced latent heat fluxes driven primarily by an increase in vector mean wind damp the anomalous heat content of the ocean near the hot spot before day 20. Between day 20 and day 50, suppressed latent heat fluxes due to suppressed synoptic eddy variance cause a warming of the remote Tropics in regions of anomalous low-level easterly flow. This wind-driven evaporative atmosphere–ocean exchange results in a 60–70-day oscillation in tropical mean oceanic heat content, accompanied by a compensating out-of-phase oscillation in vertically integrated atmospheric moist static energy. Beyond day 70 of the simulation, positive SST anomalies are found across much of the tropical belt. These slowly decay toward the 28°C background state.

How Much Do Different Land Models Matter for Climate Simulation? Part I: Climatology and Variability

2010 ◽  
Vol 23 (11) ◽  
pp. 3120-3134 ◽  
Author(s):  
Jiangfeng Wei ◽  
Paul A. Dirmeyer ◽  
Zhichang Guo ◽  
Li Zhang ◽  
Vasubandhu Misra
Keyword(s):  
Heat Flux ◽  
Surface Temperature ◽  
Latent Heat ◽  
General Circulation ◽  
Surface Fluxes ◽  
Heat Fluxes ◽  
Maximum Temperature ◽  
Daily Maximum Temperature ◽  
Time Step ◽  
The Impact

Abstract An atmospheric general circulation model (AGCM) is coupled to three different land surface schemes (LSSs), both individually and in combination (i.e., the LSSs receive the same AGCM forcing each time step and the averaged upward surface fluxes are passed back to the AGCM), to study the uncertainty of simulated climatologies and variabilities caused by different LSSs. This tiling of the LSSs is done to study the uncertainty of simulated mean climate and climate variability caused by variations between LSSs. The three LSSs produce significantly different surface fluxes over most of the land, no matter whether they are coupled individually or in combination. Although the three LSSs receive the same atmospheric forcing in the combined experiment, the inter-LSS spread of latent heat flux can be larger or smaller than the individually coupled experiment, depending mostly on the evaporation regime of the schemes in different regions. Differences in precipitation are the main reason for the different latent heat fluxes over semiarid regions, but for sensible heat flux, the atmospheric differences and LSS differences have comparable contributions. The influence of LSS uncertainties on the simulation of surface temperature is strongest in dry seasons, and its influence on daily maximum temperature is stronger than on minimum temperature. Land–atmosphere interaction can dampen the impact of LSS uncertainties on surface temperature in the tropics, but can strengthen their impact in middle to high latitudes. Variations in the persistence of surface heat fluxes exist among the LSSs, which, however, have little impact on the global pattern of precipitation persistence. The results provide guidance to future diagnosis of model uncertainties related to LSSs.

scholarly journals Air-Sea Interactions over Eddies in the Brazil-Malvinas Confluence

2021 ◽  
Vol 13 (7) ◽  
pp. 1335
Author(s):  
Ronald Souza ◽  
Luciano Pezzi ◽  
Sebastiaan Swart ◽  
Fabrício Oliveira ◽  
Marcelo Santini
Keyword(s):  
Latent Heat ◽  
Large Scale ◽  
Surface Wind ◽  
Heat Fluxes ◽  
Lower Atmosphere ◽  
Meteorological Variables ◽  
Global Ocean ◽  
Study Region ◽  
Cold Core

The Brazil–Malvinas Confluence (BMC) is one of the most dynamical regions of the global ocean. Its variability is dominated by the mesoscale, mainly expressed by the presence of meanders and eddies, which are understood to be local regulators of air-sea interaction processes. The objective of this work is to study the local modulation of air-sea interaction variables by the presence of either a warm (ED1) and a cold core (ED2) eddy, present in the BMC, during September to November 2013. The translation and lifespans of both eddies were determined using satellite-derived sea level anomaly (SLA) data. Time series of satellite-derived surface wind data, as well as these and other meteorological variables, retrieved from ERA5 reanalysis at the eddies’ successive positions in time, allowed us to investigate the temporal modulation of the lower atmosphere by the eddies’ presence along their translation and lifespan. The reanalysis data indicate a mean increase of 78% in sensible and 55% in latent heat fluxes along the warm eddy trajectory in comparison to the surrounding ocean of the study region. Over the cold core eddy, on the other hand, we noticed a mean reduction of 49% and 25% in sensible and latent heat fluxes, respectively, compared to the adjacent ocean. Additionally, a field campaign observed both eddies and the lower atmosphere from ship-borne observations before, during and after crossing both eddies in the study region during October 2013. The presence of the eddies was imprinted on several surface meteorological variables depending on the sea surface temperature (SST) in the eddy cores. In situ oceanographic and meteorological data, together with high frequency micrometeorological data, were also used here to demonstrate that the local, rather than the large scale forcing of the eddies on the atmosphere above, is, as expected, the principal driver of air-sea interaction when transient atmospheric systems are stable (not actively varying) in the study region. We also make use of the in situ data to show the differences (biases) between bulk heat flux estimates (used on atmospheric reanalysis products) and eddy covariance measurements (taken as “sea truth”) of both sensible and latent heat fluxes. The findings demonstrate the importance of short-term changes (minutes to hours) in both the atmosphere and the ocean in contributing to these biases. We conclude by emphasizing the importance of the mesoscale oceanographic structures in the BMC on impacting local air-sea heat fluxes and the marine atmospheric boundary layer stability, especially under large scale, high-pressure atmospheric conditions.

scholarly journals Evaluation of Satellite-Derived Latent Heat Fluxes

1997 ◽  
Vol 10 (11) ◽  
pp. 2782-2795 ◽  
Author(s):  
Jörg Schulz ◽  
Jens Meywerk ◽  
Stefan Ewald ◽  
Peter Schlüssel
Keyword(s):  
Latent Heat ◽  
Heat Fluxes

scholarly journals Influence of Land Cover and Soil Moisture on the Horizontal Distribution of Sensible and Latent Heat Fluxes in Southeast Kansas during IHOP_2002 and CASES-97

2007 ◽  
Vol 8 (1) ◽  
pp. 68-87 ◽  
Author(s):  
Margaret A. LeMone ◽  
Fei Chen ◽  
Joseph G. Alfieri ◽  
Mukul Tewari ◽  
Bart Geerts ◽  
...  
Keyword(s):  
Soil Moisture ◽  
Latent Heat ◽  
Land Surface ◽  
Field Experiments ◽  
Time Of Day ◽  
Horizontal Distribution ◽  
Heat Fluxes ◽  
Surface Model ◽  
Green Vegetation ◽  
The Impact

Abstract Analyses of daytime fair-weather aircraft and surface-flux tower data from the May–June 2002 International H2O Project (IHOP_2002) and the April–May 1997 Cooperative Atmosphere Surface Exchange Study (CASES-97) are used to document the role of vegetation, soil moisture, and terrain in determining the horizontal variability of latent heat LE and sensible heat H along a 46-km flight track in southeast Kansas. Combining the two field experiments clearly reveals the strong influence of vegetation cover, with H maxima over sparse/dormant vegetation, and H minima over green vegetation; and, to a lesser extent, LE maxima over green vegetation, and LE minima over sparse/dormant vegetation. If the small number of cases is producing the correct trend, other effects of vegetation and the impact of soil moisture emerge through examining the slope ΔxyLE/ΔxyH for the best-fit straight line for plots of time-averaged LE as a function of time-averaged H over the area. Based on the surface energy balance, H + LE = Rnet − Gsfc, where Rnet is the net radiation and Gsfc is the flux into the soil; Rnet − Gsfc ∼ constant over the area implies an approximately −1 slope. Right after rainfall, H and LE vary too little horizontally to define a slope. After sufficient drying to produce enough horizontal variation to define a slope, a steep (∼−2) slope emerges. The slope becomes shallower and better defined with time as H and LE horizontal variability increases. Similarly, the slope becomes more negative with moister soils. In addition, the slope can change with time of day due to phase differences in H and LE. These trends are based on land surface model (LSM) runs and observations collected under nearly clear skies; the vegetation is unstressed for the days examined. LSM runs suggest terrain may also play a role, but observational support is weak.

scholarly journals Averaging-Related Biases in Monthly Latent Heat Fluxes

2012 ◽  
Vol 29 (7) ◽  
pp. 974-986 ◽  
Author(s):  
Paul J. Hughes ◽  
Mark A. Bourassa ◽  
Jeremy J. Rolph ◽  
Shawn R. Smith
Keyword(s):  
Latent Heat ◽  
Classical Method ◽  
Surface Flux ◽  
Heat Fluxes ◽  
Western Boundary ◽  
State University ◽  
Boundary Current ◽  
Surface Energy Fluxes ◽  
Temporal Averaging ◽  
The Impact

Abstract Seasonal-to-multidecadal applications that require ocean surface energy fluxes often require accuracies of surface turbulent fluxes to be 5 W m−2 or better. While there is little doubt that uncertainties in the flux algorithms and input data can cause considerable errors, the impact of temporal averaging has been more controversial. The biases resulting from using monthly averaged winds, temperatures, and humidities in the bulk aerodynamic formula (i.e., the so-called classical method) to estimate the monthly mean latent heat fluxes are shown to be substantial and spatially varying in a manner that is consistent with most prior work. These averaging-related biases are linked to nonnegligible submonthly covariances between the wind, temperature, and humidity. To provide additional insight into the averaging-related bias, the methodology behind the third-generation Florida State University monthly mean surface flux product (FSU3) is detailed to highlight additional sources of errors in gridded datasets. The FSU3 latent heat fluxes suffer from this averaging-related bias, which can be as large as 90 W m−2 in western boundary current regions during winter and can exceed 40 W m−2 in synoptically active portions of the tropics. The regional impacts of these biases on the mixed layer temperature tendency are shown to demonstrate that the error resulting from applying the classical method is physically substantial.

Sign in / Sign up

Export Citation Format

Share Document