scholarly journals Development and characterization of a fast measurement system for gas-phase nitric acid with a chemical ionization mass spectrometer in the marine boundary layer

2002 ◽  
Vol 107 (D2) ◽  
Author(s):  
Hiroshi Furutani
Keyword(s):  
Boundary Layer ◽  
Nitric Acid ◽  
Gas Phase ◽  
Mass Spectrometer ◽  
Measurement System ◽  
Chemical Ionization ◽  
Marine Boundary Layer ◽  
Ionization Mass ◽  
Fast Measurement

scholarly journals A Chemical Ionization Mass Spectrometer for Ground-Based Measurements of Nitric Acid

2006 ◽  
Vol 23 (8) ◽  
pp. 1104-1113 ◽  
Author(s):  
Kazuyuki Kita ◽  
Yu Morino ◽  
Yutaka Kondo ◽  
Yuichi Komazaki ◽  
Nobuyuki Takegawa ◽  
...  
Keyword(s):  
Nitric Acid ◽  
Mass Spectrometer ◽  
Chemical Ionization ◽  
Limit Of Detection ◽  
Field Tests ◽  
Background Level ◽  
Ionization Mass ◽  
Mixing Ratios ◽  
Free Air ◽  
Diffusion Scrubber

Abstract A chemical ionization mass spectrometer (CIMS) instrument has been developed for high-precision measurements of gaseous nitric acid (HNO3) specifically under high- and variable-humidity conditions in the boundary layer. The instrument’s background signals (i.e., signals detected when HNO3-free air is measured), which depend on the humidity and HNO3 concentration of the sample air, are the most important factor affecting the limit of detection (LOD). A new system to provide HNO3-free air without changing both the humidity and the pressure of the sampled air was developed to measure the background level accurately. The detection limit was about 23 parts per trillion by volume (pptv) for 50-s averages. Field tests, including an intercomparison with the diffusion scrubber technique, were carried out at a surface site in Tokyo, Japan, in October 2003 and June 2004. A comparison between the measured concentrations of HNO3 and particulate nitrate indicated that the interference from particulate nitrate was not detectable (i.e., less than about 1%). The intercomparison indicated that the two independent measurements of HNO3 agreed to within the combined uncertainties of these measurements. This result demonstrates that the CIMS instrument developed in this study is capable of measuring HNO3 mixing ratios with the precision, accuracy, and time resolution required for atmospheric science.

scholarly journals Revisiting benzene cluster cations for the chemical ionization of dimethyl sulfide and select volatile organic compounds

2015 ◽  
Vol 8 (10) ◽  
pp. 10121-10157 ◽  
Author(s):  
M. J. Kim ◽  
M. C. Zoerb ◽  
N. R. Campbell ◽  
K. J. Zimmermann ◽  
B. W. Blomquist ◽  
...  
Keyword(s):  
Volatile Organic Compounds ◽  
Organic Compounds ◽  
Mass Spectrometer ◽  
Chemical Ionization ◽  
Dimethyl Sulfide ◽  
Marine Boundary Layer ◽  
Ionization Mass ◽  
Select Group ◽  
Wide Range ◽  
Volatile Organic

Abstract. Benzene cluster cations were revisited as a sensitive and selective reagent ion for the chemical ionization of dimethyl sulfide (DMS) and a select group of volatile organic compounds (VOCs). Laboratory characterization was performed using both a new set of compounds (i.e. DMS, β-caryophyllene) as well as previously studied VOCs (i.e., isoprene, α-pinene). Using a field deployable chemical ionization time-of-flight mass spectrometer (CI-ToFMS), benzene cluster cations demonstrated high sensitivity (> 1 ncps ppt−1) to DMS, isoprene, and α-pinene standards. Parallel measurements conducted using a chemical-ionization quadrupole mass spectrometer, with a weaker electric field, demonstrated that ion-molecule reactions likely proceed through a combination of ligand-switching and direct charge transfer mechanisms. Laboratory tests suggest that benzene cluster cations may be suitable for the selective ionization of sesquiterpenes, where minimal fragmentation (< 25 %) was observed for the detection of β-caryophyllene, a bicyclic sesquiterpene. The field stability of benzene cluster cations using CI-ToFMS was examined in the marine boundary layer during the High Wind Gas Exchange Study (HiWinGS). The use of benzene cluster cation chemistry for the selective detection of DMS was validated against an atmospheric pressure ionization mass spectrometer. Measurements from the two instruments were highly correlated (R2=0.80) over a wide range of sampling conditions.

scholarly journals Characterization of a thermal decomposition chemical ionization mass spectrometer for the measurement of peroxy acyl nitrates (PANs) in the atmosphere

2011 ◽  
Vol 11 (13) ◽  
pp. 6529-6547 ◽  
Author(s):  
W. Zheng ◽  
F. M. Flocke ◽  
G. S. Tyndall ◽  
A. Swanson ◽  
J. J. Orlando ◽  
...  
Keyword(s):  
Thermal Decomposition ◽  
Mass Spectrometer ◽  
Chemical Ionization ◽  
Thermal Dissociation ◽  
Ionization Mass ◽  
Operation Conditions ◽  
Dual Channel ◽  
Acyl Radicals ◽  
Secondary Reactions

Abstract. This paper presents a detailed laboratory characterization of a thermal dissociation chemical ionization mass spectrometer (TD-CIMS) for the atmospheric measurement of Peroxyacetyl nitrate (PAN) and its homologues (PANs). PANs are efficiently dissociated in a heated inlet and the resulting peroxy acyl radicals are reacted with I− ions in a flow tube. The mass spectrometer detects the corresponding carboxylate ions. PAN, peroxypropionyl nitrate (PPN), peroxyisobutyryl nitrate (PiBN), peroxy-n-butyryl nitrate (PnBN), peroxyacryloyl nitrate (APAN), peroxycrotonyl nitrates (CPAN) and peroxymethacryloyl nitrate (MPAN) were cross-calibrated with both a dual channel GC/ECD and a total odd-nitrogen (NOy) instrument for the NCAR TD-CIMS' typical aircraft operation conditions. In addition, the instrument sensitivity to a number of more exotic PANs (peroxyhydroxyacetyl nitrate, methoxyformyl peroxynitrate, and peroxybenzoyl nitrate) was evaluated qualitatively by comparisons with a long-path FTIR instrument. The sensitivity for PPN is slightly higher than that of PAN. Larger aliphatic and olefinic PAN compounds generally showed lower sensitivities. We postulate that these differences are owing to secondary reactions in the thermal decomposition region, which either reduce the yield of peroxy acyl radicals or cause losses of these radicals through intramolecular decomposition. The relative importance of these secondary reactions varies considerably between different PAN species. Results also indicate that the reaction of the larger peroxy acyl radicals with the ion-water cluster, I−(H2O)n proceeds about an order of magnitude faster than with I− alone, as has been observed for peroxy acetyl radicals. Sensitivity variations among the individual PAN species at very low water vapor were observed. The results call for careful evaluation of each PAN species to be measured and for each desired operating condition of a TD-CIMS instrument.

scholarly journals A switchable reagent ion high resolution time-of-flight chemical ionization mass spectrometer for real-time measurement of gas phase oxidized species: characterization from the 2013 Southern Oxidant and Aerosol Study

2015 ◽  
Vol 8 (3) ◽  
pp. 3199-3244 ◽  
Author(s):  
P. Brophy ◽  
D. K. Farmer
Keyword(s):  
High Resolution ◽  
Formic Acid ◽  
Gas Phase ◽  
Mass Spectrometer ◽  
Chemical Ionization ◽  
Time Of Flight ◽  
Ionization Mass ◽  
Resolution Time ◽  
Limit Of Quantification ◽  
Reduced Pressure

Abstract. A novel configuration of the Aerodyne high resolution time-of-flight chemical ionization mass spectrometer (HR-TOF-CIMS) as a switchable reagent ion (SRI) HR-TOF-CIMS is presented and described along with data collected at the Southern Oxidant and Aerosol Study (SOAS) during the summer of 2013. The calibration system and reduced pressure gas-phase inlet are characterized. The average limit of detection and limit of quantification for formic acid during SOAS are 82 and 863 ppt, respectively, corresponding to an average sensitivity of 13 ± 5 Hz ppt−1. Hourly background determinations and calibrations are shown to be essential for tracking instrument performance and accurately quantifying formic acid. Maximum daytime formic acid concentrations of 10 ppb are reported during SOAS, and a strong diel cycle is observed leading to night time concentrations below the limit of quantification. Other species presented exhibit diel behavior similar to formic acid. The concept of the mass defect enhancement plot and the use of signal-to-noise are described in detail as a method for investigating HR-TOF-CIMS spectra in an effort to reduce data complexity.

scholarly journals Revisiting benzene cluster cations for the chemical ionization of dimethyl sulfide and select volatile organic compounds

2016 ◽  
Vol 9 (4) ◽  
pp. 1473-1484 ◽  
Author(s):  
Michelle J. Kim ◽  
Matthew C. Zoerb ◽  
Nicole R. Campbell ◽  
Kathryn J. Zimmermann ◽  
Byron W. Blomquist ◽  
...  
Keyword(s):  
Volatile Organic Compounds ◽  
Organic Compounds ◽  
Mass Spectrometer ◽  
Chemical Ionization ◽  
Dimethyl Sulfide ◽  
Marine Boundary Layer ◽  
Ionization Mass ◽  
Select Group ◽  
Wide Range ◽  
Volatile Organic

Abstract. Benzene cluster cations were revisited as a sensitive and selective reagent ion for the chemical ionization of dimethyl sulfide (DMS) and a select group of volatile organic compounds (VOCs). Laboratory characterization was performed using both a new set of compounds (i.e., DMS, β-caryophyllene) as well as previously studied VOCs (i.e., isoprene, α-pinene). Using a field deployable chemical-ionization time-of-flight mass spectrometer (CI-ToFMS), benzene cluster cations demonstrated high sensitivity (> 1 ncps ppt−1) to DMS, isoprene, and α-pinene standards. Parallel measurements conducted using a chemical-ionization quadrupole mass spectrometer, with a much weaker electric field, demonstrated that ion–molecule reactions likely proceed through a combination of ligand-switching and direct charge transfer mechanisms. Laboratory tests suggest that benzene cluster cations may be suitable for the selective ionization of sesquiterpenes, where minimal fragmentation (< 25 %) was observed for the detection of β-caryophyllene, a bicyclic sesquiterpene. The in-field stability of benzene cluster cations using CI-ToFMS was examined in the marine boundary layer during the High Wind Gas Exchange Study (HiWinGS). The use of benzene cluster cation chemistry for the selective detection of DMS was validated against an atmospheric pressure ionization mass spectrometer, where measurements from the two instruments were highly correlated (R2 > 0.95, 10 s averages) over a wide range of sampling conditions.

scholarly journals A switchable reagent ion high resolution time-of-flight chemical ionization mass spectrometer for real-time measurement of gas phase oxidized species: characterization from the 2013 southern oxidant and aerosol study

2015 ◽  
Vol 8 (7) ◽  
pp. 2945-2959 ◽  
Author(s):  
P. Brophy ◽  
D. K. Farmer
Keyword(s):  
High Resolution ◽  
Formic Acid ◽  
Gas Phase ◽  
Mass Spectrometer ◽  
Chemical Ionization ◽  
Time Of Flight ◽  
Ionization Mass ◽  
Resolution Time ◽  
Limit Of Quantification ◽  
Reduced Pressure

Abstract. A novel configuration of the Aerodyne high resolution time-of-flight chemical ionization mass spectrometer (HR-TOF-CIMS) as a switchable reagent ion (SRI) HR-TOF-CIMS is presented and described along with data collected at the Southern Oxidant and Aerosol Study (SOAS) during the summer of 2013. The calibration system and reduced pressure gas phase inlet are characterized. The average limit of detection and limit of quantification for formic acid during SOAS are 82 and 863 ppt, respectively, corresponding to an average sensitivity of 13 ± 5 Hz ppt−1. Hourly background determinations and calibrations are shown to be essential for tracking instrument performance and accurately quantifying formic acid. Maximum daytime formic acid concentrations of 10 ppb are reported during SOAS, and a strong diel cycle is observed leading to nighttime concentrations below the limit of quantification. Other species presented exhibit diel behavior similar to formic acid. The concept of the mass defect enhancement plot and the use of signal-to-noise are described in detail as a method for investigating HR-TOF-CIMS spectra in an effort to reduce data complexity.

Sign in / Sign up

Export Citation Format

Share Document