scholarly journals Textural equilibria of iron sulfide liquids in partly molten silicate aggregates and their relevance to core formation scenarios

2000 ◽  
Vol 105 (B6) ◽  
pp. 13555-13567 ◽  
Author(s):  
Astrid Holzheid ◽  
Mark D. Schmitz ◽  
Timothy L. Grove
Keyword(s):  
Iron Sulfide ◽  
Core Formation ◽  
Molten Silicate

Point and planar defects in the iron sulfide compounds Fe1-xS

1984 ◽  
Vol 42 ◽  
pp. 434-435
Author(s):  
Thao A. Nguyen
Keyword(s):  
Low Temperatures ◽  
Direct Evidence ◽  
Iron Sulfide ◽  
Planar Defects ◽  
Selective Area ◽  
Vacancy Ordering ◽  
Different Types ◽  
Lattice Images ◽  
The Subject ◽  
Beam Lattice

It is well known that the large deviations from stoichiometry in iron sulfide compounds, Fe1-xS (0≤x≤0.125), are accommodated by iron vacancies which order and form superstructures at low temperatures. Although the ordering of the iron vacancies has been well established, the modes of vacancy ordering, hence superstructures, as a function of composition and temperature are still the subject of much controversy. This investigation gives direct evidence from many-beam lattice images of Fe1-xS that the 4C superstructure transforms into the 3C superstructure (Fig. 1) rather than the MC phase as previously suggested. Also observed are an intrinsic stacking fault in the sulfur sublattice and two different types of vacancy-ordering antiphase boundaries. Evidence from selective area optical diffractograms suggests that these planar defects complicate the diffraction pattern greatly.

Roles of the key enzymes involved in the angucycline core formation in the BE-7585A biosynthesis

Planta Medica ◽  
2014 ◽  
Vol 80 (10) ◽  
Author(s):  
X Yu ◽  
M Metsä-Ketelä ◽  
SC Tsai ◽  
HW Liu ◽  
J Rohr
Keyword(s):  
Core Formation ◽  
Key Enzymes

scholarly journals A Hierarchically Ordered Mesoporous-Carbon-Supported Iron Sulfide Anode for High-Rate Na-Ion Storage

Molecules ◽  
2021 ◽  
Vol 26 (14) ◽  
pp. 4349
Author(s):  
Anupriya K. Haridas ◽  
Natarajan Angulakshmi ◽  
Arul Manuel Stephan ◽  
Younki Lee ◽  
Jou-Hyeon Ahn
Keyword(s):  
Mesoporous Carbon ◽  
Anode Materials ◽  
Iron Sulfide ◽  
Carbon Composite ◽  
Ordered Mesoporous Carbon ◽  
Cycle Life ◽  
High Rate ◽  
Volume Changes ◽  
Ordered Mesoporous ◽  
Ion Storage

Sodium-ion batteries (SIBs) are promising alternatives to lithium-based energy storage devices for large-scale applications, but conventional lithium-ion battery anode materials do not provide adequate reversible Na-ion storage. In contrast, conversion-based transition metal sulfides have high theoretical capacities and are suitable anode materials for SIBs. Iron sulfide (FeS) is environmentally benign and inexpensive but suffers from low conductivity and sluggish Na-ion diffusion kinetics. In addition, significant volume changes during the sodiation of FeS destroy the electrode structure and shorten the cycle life. Herein, we report the rational design of the FeS/carbon composite, specifically FeS encapsulated within a hierarchically ordered mesoporous carbon prepared via nanocasting using a SBA-15 template with stable cycle life. We evaluated the Na-ion storage properties and found that the parallel 2D mesoporous channels in the resultant FeS/carbon composite enhanced the conductivity, buffered the volume changes, and prevented unwanted side reactions. Further, high-rate Na-ion storage (363.4 mAh g−1 after 500 cycles at 2 A g−1, 132.5 mAh g−1 at 20 A g−1) was achieved, better than that of the bare FeS electrode, indicating the benefit of structural confinement for rapid ion transfer, and demonstrating the excellent electrochemical performance of this anode material at high rates.

scholarly journals Electrochemical removal of pyrite scale using green formulations

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Musa Ahmed ◽  
Ibnelwaleed A. Hussein ◽  
Abdulmujeeb T. Onawole ◽  
Mohammed A. Saad ◽  
Mazen Khaled
Keyword(s):  
Hydrogen Sulfide ◽  
Current Density ◽  
Iron Sulfide ◽  
Chelating Agent ◽  
Electrical Current ◽  
Electrochemical Process ◽  
Chemical Dissolution ◽  
Hydrocarbon Production ◽  
Rotational Rate ◽  
Diethylenetriamine Pentaacetic Acid

AbstractPyrite scale formation is a critical problem in the hydrocarbon production industry; it affects the flow of hydrocarbon within the reservoir and the surface facilities. Treatments with inorganic acids, such as HCl, results in generation toxic hydrogen sulfide, high corrosion rates, and low dissolving power. In this work, the dissolution of pyrite scale is enhanced by the introduction of electrical current to aid the chemical dissolution. The electrolytes used in this study are chemical formulations mainly composed of diethylenetriamine-pentaacetic acid–potassium (DTPAK5) with potassium carbonate; diethylenetriamine pentaacetic acid sodium-based (DTPANa5), and l-glutamic acid-N, N-diacetic acid (GLDA). DTPA and GLDA have shown some ability to dissolve iron sulfide without generating hydrogen sulfide. The effect of these chemical formulations, disc rotational rate and current density on the electro-assisted dissolution of pyrite are investigated using Galvanostatic experiments at room temperature. The total iron dissolved of pyrite using the electrochemical process is more than 400 times higher than the chemical dissolution using the same chelating agent-based formulation and under the same conditions. The dissolution rate increased by 12-folds with the increase of current density from 5 to 50 mA/cm2. Acid and neutral formulations had better dissolution capacities than basic ones. In addition, doubling the rotational rate did not yield a significant increase in electro-assisted pyrite scale dissolution. XPS analysis confirmed the electrochemical dissolution is mainly due to oxidation of Fe2+ on pyrite surface lattice to Fe3+. The results obtained in this study suggest that electro-assisted dissolution is a promising technique for scale removal.

Sign in / Sign up

Export Citation Format

Share Document