Propagation property of transient MHD impulses in the Magnetosphere-Ionosphere System: The 2D model of the Pi2 pulsation

2001 ◽  
Vol 28 (11) ◽  
pp. 2161-2164 ◽  
Author(s):  
S. Fujita ◽  
T. Mizuta ◽  
M. Itonaga ◽  
A. Yoshikawa ◽  
H. Nakata
Keyword(s):  
Propagation Property ◽  
Pi2 Pulsation ◽  
2D Model

scholarly journals Interfacial Tension Measurements in Microfluidic Quasi-Static Extensional Flows

Micromachines ◽  
2021 ◽  
Vol 12 (3) ◽  
pp. 272
Author(s):  
Doojin Lee ◽  
Amy Q. Shen
Keyword(s):  
Interfacial Tension ◽  
Microfluidic Device ◽  
Extensional Flow ◽  
Immiscible Fluids ◽  
Droplet Microfluidics ◽  
Channel Height ◽  
Deformation Model ◽  
Droplet Deformation ◽  
Extensional Flows ◽  
2D Model

Droplet microfluidics provides a versatile tool for measuring interfacial tensions between two immiscible fluids owing to its abilities of fast response, enhanced throughput, portability and easy manipulations of fluid compositions, comparing to conventional techniques. Purely homogeneous extension in the microfluidic device is desirable to measure the interfacial tension because the flow field enables symmetric droplet deformation along the outflow direction. To do so, we designed a microfluidic device consisting of a droplet production region to first generate emulsion droplets at a flow-focusing area. The droplets are then trapped at a stagnation point in the cross junction area, subsequently being stretched along the outflow direction under the extensional flow. These droplets in the device are either confined or unconfined in the channel walls depending on the channel height, which yields different droplet deformations. To calculate the interfacial tension for confined and unconfined droplet cases, quasi-static 2D Darcy approximation model and quasi-static 3D small deformation model are used. For the confined droplet case under the extensional flow, an effective viscosity of the two immiscible fluids, accounting for the viscosity ratio of continuous and dispersed phases, captures the droplet deformation well. However, the 2D model is limited to the case where the droplet is confined in the channel walls and deforms two-dimensionally. For the unconfined droplet case, the 3D model provides more robust estimates than the 2D model. We demonstrate that both 2D and 3D models provide good interfacial tension measurements under quasi-static extensional flows in comparison with the conventional pendant drop method.

scholarly journals Multi-Objective Model-Based Assessment of Green-Grey Infrastructures for Urban Flood Mitigation

Hydrology ◽  
2021 ◽  
Vol 8 (3) ◽  
pp. 110
Author(s):  
Carlos Martínez ◽  
Zoran Vojinovic ◽  
Arlex Sanchez
Keyword(s):  
Green Infrastructure ◽  
Overland Flow ◽  
Flood Damage ◽  
Optimal Number ◽  
Rainfall Runoff ◽  
Urban Catchment ◽  
Model Based ◽  
Model Domain ◽  
Infiltration Processes ◽  
2D Model

This paper presents the performance quantification of different green-grey infrastructures, including rainfall-runoff and infiltration processes, on the overland flow and its connection with a sewer system. The present study suggests three main components to form the structure of the proposed model-based assessment. The first two components provide the optimal number of green infrastructure (GI) practices allocated in an urban catchment and optimal grey infrastructures, such as pipe and storage tank sizing. The third component evaluates selected combined green-grey infrastructures based on rainfall-runoff and infiltration computation in a 2D model domain. This framework was applied in an urban catchment in Dhaka City (Bangladesh) where different green-grey infrastructures were evaluated in relation to flood damage and investment costs. These practices implemented separately have an impact on the reduction of damage and investment costs. However, their combination has been shown to be the best action to follow. Finally, it was proved that including rainfall-runoff and infiltration processes, along with the representation of GI within a 2D model domain, enhances the analysis of the optimal combination of infrastructures, which in turn allows the drainage system to be assessed holistically.

scholarly journals Rb intercalation enhanced the supercapacitive performance of layer-structured MoS2 as a 2D model material

2021 ◽  
Author(s):  
Ahmed H Biby ◽  
Basant A. Ali ◽  
Nageh Allam
Keyword(s):  
Energy Storage ◽  
Alkali Metals ◽  
2D Materials ◽  
Model Material ◽  
Supercapacitive Performance ◽  
Storage Performance ◽  
2D Model

Intercalation of alkali metals has proved to be an effective approach for the enhancement of the energy storage performance in layered-2D materials. However, the research so far has been limited...

1D and 2D model coupling approach for the development of operational spatial flood early warning system

2021 ◽  
pp. 1-16
Author(s):  
Sindhu Kalimisetty ◽  
Amanpreet Singh ◽  
Durga Rao Korada Hari Venkata ◽  
Venkateshwar Rao V ◽  
Vazeer Mahammood
Keyword(s):  
Early Warning ◽  
Early Warning System ◽  
Warning System ◽  
Model Coupling ◽  
Coupling Approach ◽  
2D Model

scholarly journals A FEM-Based 2D Model for Simulation and Qualitative Assessment of Shot-Peening Processes

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 2784
Author(s):  
Georgios Maliaris ◽  
Christos Gakias ◽  
Michail Malikoutsakis ◽  
Georgios Savaidis
Keyword(s):  
Process Parameters ◽  
Material Properties ◽  
Shot Peening ◽  
Qualitative Assessment ◽  
Experimental Investigations ◽  
Elastoplastic Material ◽  
Size Distributions ◽  
User Friendly ◽  
The Impact ◽  
2D Model

Shot peening is one of the most favored surface treatment processes mostly applied on large-scale engineering components to enhance their fatigue performance. Due to the stochastic nature and the mutual interactions of process parameters and the partially contradictory effects caused on the component’s surface (increase in residual stress, work-hardening, and increase in roughness), there is demand for capable and user-friendly simulation models to support the responsible engineers in developing optimal shot-peening processes. The present paper contains a user-friendly Finite Element Method-based 2D model covering all major process parameters. Its novelty and scientific breakthrough lie in its capability to consider various size distributions and elastoplastic material properties of the shots. Therewith, the model is capable to provide insight into the influence of every individual process parameter and their interactions. Despite certain restrictions arising from its 2D nature, the model can be accurately applied for qualitative or comparative studies and processes’ assessments to select the most promising one(s) for the further experimental investigations. The model is applied to a high-strength steel grade used for automotive leaf springs considering real shot size distributions. The results reveal that the increase in shot velocity and the impact angle increase the extent of the residual stresses but also the surface roughness. The usage of elastoplastic material properties for the shots has been proved crucial to obtain physically reasonable results regarding the component’s behavior.

Vertical self-organization of Ge1−xMnx nanocolumn multilayers grown on Ge(001) substrates

2016 ◽  
Vol 30 (20) ◽  
pp. 1650269 ◽  
Author(s):  
Thi Giang Le ◽  
Minh Tuan Dau
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
High Resolution ◽  
Molecular Beam Epitaxy ◽  
Elastic Constant ◽  
Structural Properties ◽  
Molecular Beam ◽  
Self Organization ◽  
Transmission Electron ◽  
2D Model

High-resolution transmission electron microscopy (HR-TEM) has been used to investigate the structural properties of GeMn/Ge nanocolumns multilayer samples grown on Ge(001) substrates by means of molecular beam epitaxy (MBE) system. Four bilayers with the spacer thickness in the range between 6 nm and 15 nm and 10 periods of bilayers of Ge[Formula: see text]Mn[Formula: see text]/Ge nanocolumn are presented. A simplified 2D model based on the theory of elastic constant interactions has been used to provide reasonable explanations to the vertical self-organization of GeMn nanocolumns in multilayers.

Lyman α intensities in a polar coronal hole from a 2D model

2002 ◽  
Vol 30 (3) ◽  
pp. 523-528
Author(s):  
L. Zangrilli ◽  
G. Poletto ◽  
P. Nicolosi ◽  
G. Noci
Keyword(s):  
Coronal Hole ◽  
Polar Coronal Hole ◽  
2D Model
Sign in / Sign up

Export Citation Format

Share Document