Site selectivity in substitution reactions of heterobinuclear (CO)4Ru(.mu.-PPh2)Co(CO)3(Ru-Co): synthesis and characterization of terminal anionic hydrido and halo complexes [Et4N][(X)(CO)3Ru(.mu.-PPh2)Co(CO)3]. X-ray structure of [Et4N][(H)(CO)3Ru(.mu.-PPh2)Co(CO)3]

1989 ◽  
Vol 8 (2) ◽  
pp. 307-313 ◽  
Author(s):  
Salaheddine. Guesmi ◽  
Pierre H. Dixneuf ◽  
Georg. Suess-Fink ◽  
Nicholas J. Taylor ◽  
Arthur J. Carty
Keyword(s):  
Synthesis And Characterization ◽  
Substitution Reactions ◽  
X Ray ◽  
Site Selectivity

Synthesis and characterization of TiN / Ti / AISI 410 coatings

2018 ◽  
Vol 2 (1) ◽  
pp. 7
Author(s):  
S Chirino ◽  
Jaime Diaz ◽  
N Monteblanco ◽  
E Valderrama
Keyword(s):  
Synthesis And Characterization ◽  
Photoemission Spectroscopy ◽  
X Ray Diffraction ◽  
X Ray ◽  
Columnar Grains ◽  
Tin Thin Films ◽  
Steel Aisi ◽  
Interacting Surfaces ◽  
Stainless Steel Aisi

The synthesis and characterization of Ti and TiN thin films of different thicknesses was carried out on a martensitic stainless steel AISI 410 substrate used for tool manufacturing. The mechanical parameters between the interacting surfaces such as thickness, adhesion and hardness were measured. By means of the scanning electron microscope (SEM) the superficial morphology of the Ti/TiN interface was observed, finding that the growth was of columnar grains and by means of EDAX the existence of titanium was verified.  Using X-ray diffraction (XRD) it was possible to observe the presence of residual stresses (~ -3.1 GPa) due to the different crystalline phases in the coating. Under X-ray photoemission spectroscopy (XPS) it was possible to observe the molecular chemical composition of the coating surface, being Ti-N, Ti-N-O and Ti-O the predominant ones.

scholarly journals Synthesis and characterization of Fe, Co, and Ni colloids in 2-mercaptoethanol

2020 ◽  
Vol 10 ◽  
pp. 184798042096688
Author(s):  
Galo Cárdenas-Triviño ◽  
Sergio Triviño-Matus
Keyword(s):  
Electron Microscopy ◽  
Electron Diffraction ◽  
Colloidal Dispersions ◽  
Synthesis And Characterization ◽  
X Ray ◽  
Transmission Electron ◽  
Vis Spectroscopy ◽  
Chemical Liquid Deposition ◽  
Liquid Deposition

Metal colloids in 2-mercaptoethanol using nanoparticles (NPs) of iron (Fe), cobalt (Co), and nickel (Ni) were prepared by chemical liquid deposition method. Transmission electron microscopy, electron diffraction, UV-VIS spectroscopy, and scanning electron microscopy with electron dispersive X-ray spectroscopy characterized the resulting colloidal dispersions. The NPs exhibited sizes with ranges from 9.8 nm for Fe, 3.7 nm for Co, and 7.2 nm for Ni. The electron diffraction shows the presence of the metals in its elemental state Fe (0), Co (0), and Ni (0) and also some compounds FeO (OH), CoCo2S4, and NiNi2S4.

scholarly journals Synthesis and Characterization of Clay Polymer Nanocomposites of P(4VP-co-AAm) and Their Application for the Removal of Atrazine

Polymers ◽  
2019 ◽  
Vol 11 (4) ◽  
pp. 721 ◽  
Author(s):  
Jorge A. Ramírez-Gómez ◽  
Javier Illescas ◽  
María del Carmen Díaz-Nava ◽  
Claudia Muro-Urista ◽  
Sonia Martínez-Gallegos ◽  
...  
Keyword(s):  
Polymer Nanocomposites ◽  
Nanocomposite Materials ◽  
Synthesis And Characterization ◽  
Cross Linking ◽  
X Ray Diffraction ◽  
Numerous Species ◽  
X Ray ◽  
Different Types ◽  
Synthesized Materials

Atrazine (ATZ) is an herbicide which is applied to the soil, and its mechanism of action involves the inhibition of photosynthesis. One of its main functions is to control the appearance of weeds in crops, primarily in corn, sorghum, sugar cane, and wheat; however, it is very toxic for numerous species, including humans. Therefore, this work deals with the adsorption of ATZ from aqueous solutions using nanocomposite materials, synthesized with two different types of organo-modified clays. Those were obtained by the free radical polymerization of 4-vinylpyridine (4VP) and acrylamide (AAm) in different stoichiometric ratios, using tetrabutylphosphonium persulfate (TBPPS) as a radical initiator and N,N′-methylenebisacrylamide (BIS) as cross-linking agent. The structural, morphological, and textural characteristics of clays, copolymers, and nanocomposites were determined through different analytical and instrumental techniques, i.e., X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and thermogravimetric analysis (TGA). Adsorption kinetics experiments of ATZ were determined with the modified and synthesized materials, and the effect of the ratio between 4VP and AAm moieties on the removal capacities of the obtained nanocomposites was evaluated. Finally, from these sets of experiments, it was demonstrated that the synthesized nanocomposites with higher molar fractions of 4VP obtained the highest removal percentages of ATZ.

scholarly journals High-pressure synthesis and characterization of the non-centrosymmetric scandium borate ScB6O9(OH)3

2020 ◽  
Vol 75 (6-7) ◽  
pp. 597-603
Author(s):  
Birgit Fuchs ◽  
Hubert Huppertz
Keyword(s):  
High Pressure ◽  
High Temperature ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
X Ray ◽  
High Pressure High Temperature ◽  
Structure Solution ◽  
Temperature Experiment ◽  
Pressure Synthesis

AbstractThe non-centrosymmetric scandium borate ScB6O9(OH)3 was obtained through a high-pressure/high-temperature experiment at 6 GPa and 1473 K. Single-crystal X-ray diffraction revealed that the structure is isotypic to InB6O9(OH)3 containing borate triple layers separated by scandium layers. The compound crystallizes in the space group Fdd2 with the lattice parameters a = 38.935(4), b = 4.4136(4), and c = 7.6342(6) Å. Powder X-ray diffraction and vibrational spectroscopy were used to further characterize the compound and verify the proposed structure solution.

Synthesis and characterization of periphery-functionalized porphyrazines containing mixed pyrrolyl and pyridylmethylamino groups

2009 ◽  
Vol 13 (02) ◽  
pp. 223-234 ◽  
Author(s):  
Tomasz Goslinski ◽  
Ewa Tykarska ◽  
Wojciech Szczolko ◽  
Tomasz Osmalek ◽  
Aleksandra Smigielska ◽  
...  
Keyword(s):  
Electrochemical Properties ◽  
Chemical Sensors ◽  
Electronic Materials ◽  
Condensation Reaction ◽  
Synthesis And Characterization ◽  
X Ray ◽  
Coordination Properties ◽  
Perpendicular Orientation ◽  
Selective Sensor

The condensation reaction of 2-amino-3-[(3-pyridylmethyl)amino]-2(Z)-butene-1,4-dinitrile with a series of diketones led to novel dinitriles, of which 2-(2,5-dimethyl-1H-pyrrol-1-yl)-3-[methyl(3-pyridylmethylene)amino]-2(Z)-butene-1,4-dinitrile, the product of the Paal-Knorr reaction, was successfully utilized in the Linstead macrocyclization towards symmetrical and unsymmetrical porphyrazines. NMR and X-ray study revealed an almost perpendicular orientation of the pyrrolyl groups in relation to the porphyrazine platform. The newly synthesized macrocycles with different peripheral groups show interesting spectroscopic and electrochemical properties. Due to selective sensor/coordination properties they are expected to find applications as chemical sensors and electronic materials.

Synthesis and Characterization of Hematite Nanoparticles as Active Photocatalyst for Water Splitting Application

2013 ◽  
Vol 594-595 ◽  
pp. 73-77 ◽  
Author(s):  
Sze Mei Chin ◽  
Suriati Sufian ◽  
Jeefferie Abd Razak
Keyword(s):  
Surface Area ◽  
Water Splitting ◽  
Combustion Method ◽  
Hydrogen Gas ◽  
Bet Surface Area ◽  
Synthesis And Characterization ◽  
Hematite Nanoparticles ◽  
X Ray ◽  
Bet Specific Surface Area

This paper highlights on the hydrogen production through photocatalytic activity by using hematite nanoparticles synthesized from self-combustion method based on different stirring period. The morphologies and microstructures of the nanostructures were determined using Field-Emission Scanning Electron Microscope (FESEM), X-Ray Diffractometer (XRD) and Particle Size Analyser (PSA). Besides that, surface area analyser was used to determine the BET surface area of the hematite samples. The hematite nanocatalyst as-synthesized are proven to be rhombohedral crystalline hematite (α-Fe2O3) with particle diameters ranging from 60-140 nm. The BET specific surface area of hematite samples increased from 5.437 to 7.6425 m2/g with increasing stirring period from 1 to 4 weeks. This caused the amount of hydrogen gas produced from photocatalytic water splitting to increase as well.

Sign in / Sign up

Export Citation Format

Share Document