Phase Behavior of Mixed Aqueous Dispersions of Dipalmitoylphosphatidylcholine and Dodecyl Glycosides:  A Differential Scanning Calorimetry and X-ray Diffraction Investigation

Langmuir ◽  
2002 ◽  
Vol 18 (2) ◽  
pp. 325-335 ◽  
Author(s):  
Brigitte Carion-Taravella ◽  
Sylviane Lesieur ◽  
Joel Chopineau ◽  
Pierre Lesieur ◽  
Michel Ollivon
Keyword(s):  
Differential Scanning Calorimetry ◽  
Phase Behavior ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Aqueous Dispersions ◽  
X Ray

Solid phase behavior of mixture systems based on tripalmitoyl glycerol and monounsaturated triacylglycerols forming a molecular compound

2022 ◽  
Author(s):  
Jorge Macridachis ◽  
Laura Bayés-García ◽  
Teresa Calvet
Keyword(s):  
Differential Scanning Calorimetry ◽  
Phase Behavior ◽  
Solid Phase ◽  
Molecular Compound ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Mixing Behavior

Differential scanning calorimetry and X-ray diffraction were used to investigate the mixing behavior of triacylglycerol (TAG) mixtures of PPP/PPO (tripalmitoyl glycerol/1,2-dipalmitoyl-3-oleoyl-rac-glycerol) and PPP/MCPOP/PPO (being MCPOP/PPO the equimolecular blend of 1,3-dipalmitoyl-2-oleoyl-glycerol...

Synthesis and Phase Behavior of Polysiloxane Nematic Liquid Crystal Elastomers

2012 ◽  
Vol 535-537 ◽  
pp. 1185-1188 ◽  
Author(s):  
Ying Gang Jia ◽  
Kun Ming Song ◽  
Bao Yan Zhang
Keyword(s):  
Differential Scanning Calorimetry ◽  
Phase Behavior ◽  
Liquid Crystalline ◽  
Side Chain ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
One Step ◽  
Liquid Crystal Elastomers ◽  
Reversible Phase

This paper describes the synthesis of new side chain nematic liquid crystalline elastomers (LCEs) by a one-step hydrosilication reaction. The phase behavior and mesomorphism were investigated by differential scanning calorimetry (DSC), polarizing optical microscopy (POM), and x-ray diffraction (XRD). The effect of the content of crosslinking units on the phase behavior and mesomorphism of elastomers P1 – P8 was discussed. The nematic LCEs exhibit elasticity, reversible phase transitions, and nematic thread texture. The experimental results demonstrate that the glass transition temperature and isotropic temperature of nematic LCEs decreased with increasing the content of crosslinking unit.

Research on compatibility and surface of high impact bio-based polyamide

2021 ◽  
pp. 095400832110055
Author(s):  
Yang Wang ◽  
Yuhui Zhang ◽  
Yuhan Xu ◽  
Xiucai Liu ◽  
Weihong Guo
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Scanning Electron Microscopy ◽  
Differential Scanning Calorimetry ◽  
Crystallization Behavior ◽  
High Impact ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Scanning Electron

The super-tough bio-based nylon was prepared by melt extrusion. In order to improve the compatibility between bio-based nylon and elastomer, the elastomer POE was grafted with maleic anhydride. Scanning Electron Microscopy (SEM) and Thermogravimetric Analysis (TGA) were used to study the compatibility and micro-distribution between super-tough bio-based nylon and toughened elastomers. The results of mechanical strength experiments show that the 20% content of POE-g-MAH has the best toughening effect. After toughening, the toughness of the super-tough nylon was significantly improved. The notched impact strength was 88 kJ/m2 increasing by 1700%, which was in line with the industrial super-tough nylon. X-ray Diffraction (XRD) and Differential Scanning Calorimetry (DSC) were used to study the crystallization behavior of bio-based PA56, and the effect of bio-based PA56 with high crystallinity on mechanical properties was analyzed from the microstructure.

scholarly journals Synthesis and mesomorphic properties of calamitic malonates and cyanoacetates tethered to 4-cyanobiphenyls

2012 ◽  
Vol 8 ◽  
pp. 371-378 ◽  
Author(s):  
Katharina C Kress ◽  
Martin Kaller ◽  
Kirill V Axenov ◽  
Stefan Tussetschläger ◽  
Sabine Laschat
Keyword(s):  
Differential Scanning Calorimetry ◽  
Ambient Temperature ◽  
Liquid Crystalline ◽  
X Ray Diffraction ◽  
Cyanoacetic Acid ◽  
Scanning Calorimetry ◽  
Isotropic Liquid ◽  
X Ray ◽  
Nematic Phases ◽  
Mesomorphic Properties

4-Cyano-1,1'-biphenyl derivatives bearing ω-hydroxyalkyl substituents were reacted with methyl 3-chloro-3-oxopropionate or cyanoacetic acid, giving liquid-crystalline linear malonates and cyanoacetates. These compounds formed monotropic nematic phases at 62 °C down to ambient temperature upon cooling from the isotropic liquid. The mesomorphic properties were investigated by differential scanning calorimetry, polarizing optical microscopy and X-ray diffraction (WAXS).

Thermotropic behavior of sodium cholesteryl carbonate

2009 ◽  
Vol 24 (1) ◽  
pp. 156-163 ◽  
Author(s):  
Rabkwan Chuealee ◽  
Timothy S. Wiedmann ◽  
Teerapol Srichana
Keyword(s):  
Phase Behavior ◽  
Chemical Structure ◽  
Liquid Crystalline ◽  
Polarized Light ◽  
Wave Number ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
X Ray Scattering ◽  
C Nmr

Sodium cholesteryl carbonate ester (SCC) was synthesized, and its phase behavior was studied. The chemical structure was assessed by solid-state infrared spectroscopy based on vibration analysis. The wave number at 1705 and 1276 cm−1 corresponds to a carbonyl carbonate and O–C–O stretching of SCC, respectively. Molecular structure of SCC was further investigated with 1H and 13C NMR spectroscopy. The chemical shift, for the carbonyl carbonate resonance appeared at 155.5 ppm. A molecular mass of SCC was at m/z of 452. Differential scanning calorimetry (DSC), video-enhanced microscopy (VEM) together with polarized light microscopy, and small-angle x-ray scattering (SAXS) were used to characterize the phase behavior as a function of temperature of SCC. Liquid crystalline phase was formed with SCC. Based on the thermal properties and x-ray diffraction, it appears that SCC forms a structure analogous to the type II monolayer structure observed with cholesterol esters.

Inosose-Flüssigkristalle / Inosose Liquid Crystals

1990 ◽  
Vol 45 (7) ◽  
pp. 1084-1090 ◽  
Author(s):  
Klaus Praefcke ◽  
Bernd Kohne ◽  
Andreas Eckert ◽  
Joachim Hempel
Keyword(s):  
Differential Scanning Calorimetry ◽  
Liquid Crystal ◽  
High Temperature ◽  
Liquid Crystalline ◽  
Structural Features ◽  
Lyotropic Liquid Crystal ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Alkyl Chains

Six S,S-dialkyl acetals 2a-f of inosose (1), tripodal in structure, have been synthesized, characterized and investigated by optical microscopy and differential scanning calorimetry (d.s.c.). The four S,S-acetals 2c-f with sufficiently long alkyl chains are thermotropic liquid crystalline; 2 e and 2 f are even dithermomesomorphic. Each of these four inosose derivatives 2c-f exhibits monotropically a most likely cubic mesophase (MI); in addition 2e and 2f show enantiotropically a hexagonal mesophase (Hx) with a non-covalent, supramolecular H-bridge architecture. Whereas the nature of the optically isotropic mesophase MI needs further clarification the stable high temperature mesophase Hx of 2 e and 2 f has been established by a miscibility test using a sugar S,S-dialkyl acetal also tripodal in structure and with a Hx phase proved by X-ray diffraction, but in contrast to 2 with an acyclic hydrophilic part. Similarities of structural features between the Hx-phases of 2e and 2f as well as of other thermotropic and lyotropic liquid crystal systems are discussed briefly.

scholarly journals Formation of Pharmaceutical Salts and Cocrystals via Vapour-Assisted Tumbling (VAT) – A Solvent Efficient Process with Potential Industrial Applications

2021 ◽  
Author(s):  
Alexander J. Stirk ◽  
Fabio E. S. Souza ◽  
Jenny Gerster ◽  
Fatemeh M. Mir ◽  
Avedis Karadeolian ◽  
...  
Keyword(s):  
Differential Scanning Calorimetry ◽  
Environmental Impact ◽  
Industrial Applications ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
New Techniques ◽  
X Ray ◽  
Industry Standard ◽  
Pharmaceutical Salts ◽  
Solid Form

Crystallisations on both the academic and industrial scale often use large volumes of solvent. In order decrease the environmental impact of such processes, new techniques must be discovered that increase the efficiency of the solvents used. Introduced here is a process that combines repurposed industry standard hardware and aspects of mechanochemistry to produce a technique we call “Vapour Assisted Tumbling” (VAT). Pharmaceutical and well-known cocrystals and salts were formed by tumbling the coformers in an atmosphere of vaporised solvent, in this study, methanol (MeOH). This was done inside a custom built analogue of an industrial rotary cone dryer (RCD). It was found that a desired solid form could be obtained as monitored by powder X-ray diffraction and differential scanning calorimetry. By repurposing industrial RCDs, it is feasible that solid forms can be crystallised with both minimal and reusable/recyclable solvent – drastically lowering the environmental impact of such transformations.

Sign in / Sign up

Export Citation Format

Share Document