Optimized Surface Plasmon Resonance Sensitivity of Gold Nanoboxes for Sensing Applications

2009 ◽  
Vol 113 (4) ◽  
pp. 1217-1221 ◽  
Author(s):  
Min Cao ◽  
Meng Wang ◽  
Ning Gu
Nanomaterials ◽  
2020 ◽  
Vol 10 (7) ◽  
pp. 1325 ◽  
Author(s):  
Ru-Jing Sun ◽  
Hung Ji Huang ◽  
Chien-Nan Hsiao ◽  
Yu-Wei Lin ◽  
Bo-Huei Liao ◽  
...  

A TiN-based substrate with high reusability presented high-sensitivity refractive index measurements in a home-built surface plasmon resonance (SPR) heterodyne phase interrogation system. TiN layers with and without additional inclined-deposited TiN (i-TiN) layers on glass substrates reached high bulk charge carrier densities of 1.28 × 1022 and 1.91 × 1022 cm−3, respectively. The additional 1.4 nm i-TiN layer of the nanorod array presented a detection limit of 6.1 × 10−7 RIU and was higher than that of the 46 nm TiN layer at 1.2 × 10−6 RIU when measuring the refractive index of a glucose solution. Furthermore, the long-term durability of the TiN-based substrate demonstrated by multiple processing experiments presented a high potential for various practical sensing applications.


Polymers ◽  
2020 ◽  
Vol 12 (7) ◽  
pp. 1497
Author(s):  
Nurul Illya Muhamad Fauzi ◽  
Yap Wing Fen ◽  
Nur Alia Sheh Omar ◽  
Silvan Saleviter ◽  
Wan Mohd Ebtisyam Mustaqim Mohd Daniyal ◽  
...  

In this study, synthesis and characterization of chitosan/maghemite (Cs/Fe2O3) composites thin film has been described. Its properties were characterized using Fourier transform infrared spectroscopy (FTIR), atomic force microscopy (AFM) and ultraviolet-visible spectroscopy (UV-Vis). FTIR confirmed the existence of Fe–O bond, C–N bond, C–C bond, C–O bond, O=C=O bond and O–H bond in Cs/Fe2O3 thin film. The surface morphology of the thin film indicated the relatively smooth and homogenous thin film, and also confirmed the interaction of Fe2O3 with the chitosan. Next, the UV-Vis result showed high absorbance value with an optical band gap of 4.013 eV. The incorporation of this Cs/Fe2O3 thin film with an optical-based method, i.e., surface plasmon resonance spectroscopy showed positive response where mercury ion (Hg2+) can be detected down to 0.01 ppm (49.9 nM). These results validate the potential of Cs/Fe2O3 thin film for optical sensing applications in Hg2+ detection.


Author(s):  
Wenying Ma ◽  
Fangrong Hu ◽  
Huan Yang ◽  
Weimin Wang

Metal nanoparticles have potential utilities in biochemical sensing applications owing to their localized surface plasmon resonance characteristics. To facilitate the application of localized surface plasmon resonance sensors, a simple and effective interpretation of spectra responses of metal nanoparticles to analyte was developed in this paper. Based on a bilayer structure model and a trilayer structure model, a general relationship between the peak wavelength changes of extinction spectra and the thickness of the receptor layer as well as the analyte layer was established. Both analytical analysis and chloroform vapor test experiment demonstrate that the sensing performance is greatly dependent on the receptor thickness, and a thinner receptor layer will induce a greater sensitivity. These insights can be used as guidelines in fabricating highly sensitive localized surface plasmon resonance-based biochemical sensors.


2010 ◽  
Vol 145 (2) ◽  
pp. 832-838 ◽  
Author(s):  
Dongfang Yang ◽  
Hui-Hsin Lu ◽  
Bo Chen ◽  
Chii-Wann Lin

Biosensors ◽  
2021 ◽  
Vol 11 (11) ◽  
pp. 455
Author(s):  
Wei Du ◽  
Lucas Miller ◽  
Feng Zhao

A new waveguide-based surface plasmon resonance (SPR) sensor was proposed and investigated by numerical simulation. The sensor consists of a graphene cover layer, a gold (Au) thin film, and a silicon carbide (SiC) waveguide layer on a silicon dioxide/silicon (SiO2/Si) substrate. The large bandgap energy of SiC allows the sensor to operate in the visible and near-infrared wavelength ranges, which effectively reduces the light absorption in water to improve the sensitivity. The sensor was characterized by comparing the shift of the resonance wavelength peak with change of the refractive index (RI), which mimics the change of analyte concentration in the sensing medium. The study showed that in the RI range of 1.33~1.36, the sensitivity was improved when the graphene layers were increased. With 10 graphene layers, a sensitivity of 2810 nm/RIU (refractive index unit) was achieved, corresponding to a 39.1% improvement in sensitivity compared to the Au/SiC sensor without graphene. These results demonstrate that the graphene/Au/SiC waveguide SPR sensor has a promising use in portable biosensors for chemical and biological sensing applications, such as detection of water contaminations (RI = 1.33~1.34), hepatitis B virus (HBV), and glucose (RI = 1.34~1.35), and plasma and white blood cells (RI = 1.35~1.36) for human health and disease diagnosis.


Sensors ◽  
2018 ◽  
Vol 18 (10) ◽  
pp. 3295 ◽  
Author(s):  
Kaiwei Li ◽  
Wenchao Zhou ◽  
Shuwen Zeng

Integration of functional nanomaterials with optical micro/nanofibers (OMNFs) can bring about novel optical properties and provide a versatile platform for various sensing applications. OMNFs as the key element, however, have seldom been investigated. Here, we focus on the optimization of fiber diameter by taking micro/nanofiber-based localized surface plasmon resonance sensors as a model. We systematically study the dependence of fiber diameter on the sensing performance of such sensors. Both theoretical and experimental results show that, by reducing fiber diameter, the refractive index sensitivity can be significantly increased. Then, we demonstrate the biosensing capability of the optimized sensor for streptavidin detection and achieve a detection limit of 1 pg/mL. Furthermore, the proposed theoretical model is applicable to other nanomaterials and OMNF-based sensing schemes for performance optimization.


2005 ◽  
Vol 148 (1) ◽  
pp. 25-29 ◽  
Author(s):  
M.G. Manera ◽  
P.D. Cozzoli ◽  
M.L. Curri ◽  
G. Leo ◽  
R. Rella ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document