CO2 Migration Pathways in Oxalate Decarboxylase and Clues about Its Active Site

2013 ◽  
Vol 117 (41) ◽  
pp. 12451-12460 ◽  
Author(s):  
Tarak Karmakar ◽  
Ganga Periyasamy ◽  
Sundaram Balasubramanian
Keyword(s):  
Active Site ◽  
Oxalate Decarboxylase ◽  
Migration Pathways

scholarly journals The identity of the active site of oxalate decarboxylase and the importance of the stability of active-site lid conformations1

2007 ◽  
Vol 407 (3) ◽  
pp. 397-406 ◽  
Author(s):  
Victoria J. Just ◽  
Matthew R. Burrell ◽  
Laura Bowater ◽  
Iain McRobbie ◽  
Clare E. M. Stevenson ◽  
...  
Keyword(s):  
Crystal Structures ◽  
Active Site ◽  
Structural Information ◽  
Side Reaction ◽  
Oxalate Oxidase ◽  
Decarboxylase Activity ◽  
Oxalate Decarboxylase ◽  
Catalytically Active ◽  
The Stability ◽  
Kinetics Of

Oxalate decarboxylase (EC 4.1.1.2) catalyses the conversion of oxalate into carbon dioxide and formate. It requires manganese and, uniquely, dioxygen for catalysis. It forms a homohexamer and each subunit contains two similar, but distinct, manganese sites termed sites 1 and 2. There is kinetic evidence that only site 1 is catalytically active and that site 2 is purely structural. However, the kinetics of enzymes with mutations in site 2 are often ambiguous and all mutant kinetics have been interpreted without structural information. Nine new site-directed mutants have been generated and four mutant crystal structures have now been solved. Most mutants targeted (i) the flexibility (T165P), (ii) favoured conformation (S161A, S164A, D297A or H299A) or (iii) presence (Δ162–163 or Δ162–164) of a lid associated with site 1. The kinetics of these mutants were consistent with only site 1 being catalytically active. This was particularly striking with D297A and H299A because they disrupted hydrogen bonds between the lid and a neighbouring subunit only when in the open conformation and were distant from site 2. These observations also provided the first evidence that the flexibility and stability of lid conformations are important in catalysis. The deletion of the lid to mimic the plant oxalate oxidase led to a loss of decarboxylase activity, but only a slight elevation in the oxalate oxidase side reaction, implying other changes are required to afford a reaction specificity switch. The four mutant crystal structures (R92A, E162A, Δ162–163 and S161A) strongly support the hypothesis that site 2 is purely structural.

Oxalate Decarboxylase and Oxalate Oxidase Activities Can Be Interchanged with a Specificity Switch of up to 282 000 by Mutating an Active Site Lid†,‡

Biochemistry ◽  
2007 ◽  
Vol 46 (43) ◽  
pp. 12327-12336 ◽  
Author(s):  
Matthew R. Burrell ◽  
Victoria J. Just ◽  
Laura Bowater ◽  
Shirley A. Fairhurst ◽  
Laura Requena ◽  
...  
Keyword(s):  
Active Site ◽  
Oxalate Oxidase ◽  
Oxalate Decarboxylase

scholarly journals Computational Investigation of O2 Diffusion Through an Intra–molecular Tunnel in AlkB; Influence of Polarization on O2 Transport

2017 ◽  
Author(s):  
Hedieh Torabifard ◽  
G. Andrés Cisneros
Keyword(s):  
Active Site ◽  
Oxidation Mechanism ◽  
Md Simulations ◽  
Potential Of Mean Force ◽  
E Coli ◽  
O2 Diffusion ◽  
Molecular Tunnels ◽  
Migration Pathways ◽  
Conserved Residue ◽  
Initial Crystal

AbstractE. Coli AlkB catalyzes the direct dealkylation of various alkylated bases in damaged DNA. The diffusion of molecular Oxygen to the active site in AlkB is an essential step for the oxidative dealkylation activity. Despite detailed studies on the stepwise oxidation mechanism of AlkB, there is no conclusive picture of how O2 molecules reach the active site of the protein. Yu et al. (Nature,439, 879) proposed the existence of an intra–molecular tunnel based on their initial crystal structures of AlkB. We have employed computational simulations to investigate possible migration pathways inside AlkB for O2 molecules. Extensive molecular dynamics (MD) simulations, including explicit ligand sampling and potential of mean force (PMF) calculations, have been performed to provide a microscopic description of the O2 delivery pathway in AlkB. Analysis of intra–molecular tunnels using the CAVER software indicates two possible pathways for O2 to diffuse into the AlkB active site. Explicit ligand sampling simulations suggests that only one of these tunnels provides a viable route. The free energy path for an oxygen molecule to travel along each of these tunnels has been determined with AMBER and AMOEBA. Both PMFs indicate passive transport of O2 from the surface of the protein. However, the inclusion of explicit polarization shows a very large barrier for diffusion of the co–substrate out of the active site, compared with the non–polarizable potential. In addition, our results suggest that the mutation of a conserved residue along the tunnel, Y178, has dramatic effects on the dynamics of AlkB and on the transport of O2 along the tunnel.

scholarly journals The Structure of Oxalate Decarboxylase at its Active pH

2018 ◽  
Author(s):  
M. J. Burg ◽  
J. L. Goodsell ◽  
U. T. Twahir ◽  
S. D. Bruner ◽  
A. Angerhofer
Keyword(s):  
Active Site ◽  
Density Functional ◽  
Quaternary Structure ◽  
Density Functional Theory Calculations ◽  
Strong Hydrogen Bond ◽  
Binding Modes ◽  
Oxalate Decarboxylase ◽  
Direct Role ◽  
Closed Conformation ◽  
Loop Region

AbstractOxalate decarboxylase catalyzes the redox-neutral unimolecular disproportionation reaction of oxalic acid. The pH maximum for catalysis is ~4.0 and activity is negligible above pH7. Here we report on the first crystal structure of the enzyme in its active pH range at pH4.6, and at a resolution of 1.45 Å, the highest to date. The fundamental tertiary and quaternary structure of the enzyme does not change with pH. However, the low pH crystals are heterogeneous containing both a closed and open conformation of a flexible loop region which gates access to the N-terminal active site cavity. Residue E162 in the closed conformation points away from the active-site Mn ion owing to the coordination of a buffer molecule, acetate. Since the quaternary structure of the enzyme appears unaffected by pH many conclusions drawn from the structures taken at high pH remain valid. Density functional theory calculations of the possible binding modes of oxalate to the N-terminal Mn ion demonstrate that both mono- and bi-dentate coordination modes are possible in the closed conformation with an energetic preference for the bidentate binding mode. The simulations suggest that R92 plays an important role as a guide for positioning the substrate in its catalytically competent orientation. A strong hydrogen bond is seen between the bi-dentate bound substrate and E101, one of the coordinating ligands for the N-terminal Mn ion. This suggests a more direct role of E101 as a transient base during the first step of catalysis.

scholarly journals Investigating the roles of putative active site residues in the oxalate decarboxylase from Bacillus subtilis

2007 ◽  
Vol 464 (1) ◽  
pp. 36-47 ◽  
Author(s):  
Draženka Svedružić ◽  
Yong Liu ◽  
Laurie A. Reinhardt ◽  
Ewa Wroclawska ◽  
W. Wallace Cleland ◽  
...  
Keyword(s):  
Bacillus Subtilis ◽  
Active Site ◽  
Active Site Residues ◽  
Oxalate Decarboxylase ◽  
Putative Active Site

scholarly journals Active site geometry of oxalate decarboxylase from Flammulina velutipes: Role of histidine-coordinated manganese in substrate recognition

2009 ◽  
Vol 11 (9) ◽  
pp. 2138-2147 ◽  
Author(s):  
Subhra Chakraborty ◽  
Niranjan Chakraborty ◽  
Deepti Jain ◽  
Dinakar M. Salunke ◽  
Asis Datta
Keyword(s):  
Active Site ◽  
Substrate Recognition ◽  
Flammulina Velutipes ◽  
Oxalate Decarboxylase

Locating Al in the DABCO catalyst before and after Al extraction

1990 ◽  
Vol 48 (4) ◽  
pp. 265-267
Author(s):  
Kathleen B. Reuter
Keyword(s):  
Active Site ◽  
Inverse Relationship ◽  
Transverse Direction ◽  
Reaction Rate ◽  
Acid Phosphate ◽  
Fracture Surfaces ◽  
Al Content ◽  
Before And After ◽  
Relationship Of

The reaction rate and efficiency of piperazine to 1,4-diazabicyclo-octane (DABCO) depends on the Si/Al ratio of the MFI topology catalysts. The Al was shown to be the active site, however, in the Si/Al range of 30-200 the reaction rate increases as the Si/Al ratio increases. The objective of this work was to determine the location and concentration of Al to explain this inverse relationship of Al content with reaction rate.Two silicalite catalysts in the form of 1/16 inch SiO2/Al2O3 bonded extrudates were examined: catalyst A with a Si/Al of 83; and catalyst B, the acid/phosphate Al extracted form of catalyst A, with a Si/Al of 175. Five extrudates from each catalyst were fractured in the transverse direction and particles were obtained from the fracture surfaces near the center of the extrudate diameter. Particles were also obtained from the outside surfaces of five extrudates.

Structures of c-di-GMP/cGAMP degrading phosphodiesterase VcEAL: identification of a novel conformational switch and its implication

2019 ◽  
Vol 476 (21) ◽  
pp. 3333-3353 ◽  
Author(s):  
Malti Yadav ◽  
Kamalendu Pal ◽  
Udayaditya Sen
Keyword(s):  
Active Site ◽  
Metal Binding ◽  
Metal Ion ◽  
Triosephosphate Isomerase ◽  
Catalytic Mechanism ◽  
Degradation Mechanism ◽  
Structural Basis ◽  
Conserved Residues ◽  
Phosphodiester Bond ◽  
Cyclic Dinucleotides

Cyclic dinucleotides (CDNs) have emerged as the central molecules that aid bacteria to adapt and thrive in changing environmental conditions. Therefore, tight regulation of intracellular CDN concentration by counteracting the action of dinucleotide cyclases and phosphodiesterases (PDEs) is critical. Here, we demonstrate that a putative stand-alone EAL domain PDE from Vibrio cholerae (VcEAL) is capable to degrade both the second messenger c-di-GMP and hybrid 3′3′-cyclic GMP–AMP (cGAMP). To unveil their degradation mechanism, we have determined high-resolution crystal structures of VcEAL with Ca2+, c-di-GMP-Ca2+, 5′-pGpG-Ca2+ and cGAMP-Ca2+, the latter provides the first structural basis of cGAMP hydrolysis. Structural studies reveal a typical triosephosphate isomerase barrel-fold with substrate c-di-GMP/cGAMP bound in an extended conformation. Highly conserved residues specifically bind the guanine base of c-di-GMP/cGAMP in the G2 site while the semi-conserved nature of residues at the G1 site could act as a specificity determinant. Two metal ions, co-ordinated with six stubbornly conserved residues and two non-bridging scissile phosphate oxygens of c-di-GMP/cGAMP, activate a water molecule for an in-line attack on the phosphodiester bond, supporting two-metal ion-based catalytic mechanism. PDE activity and biofilm assays of several prudently designed mutants collectively demonstrate that VcEAL active site is charge and size optimized. Intriguingly, in VcEAL-5′-pGpG-Ca2+ structure, β5–α5 loop adopts a novel conformation that along with conserved E131 creates a new metal-binding site. This novel conformation along with several subtle changes in the active site designate VcEAL-5′-pGpG-Ca2+ structure quite different from other 5′-pGpG bound structures reported earlier.

Sign in / Sign up

Export Citation Format

Share Document