Dissipation Behavior of Organophosphorus Pesticides during the Cabbage Pickling Process: Residue Changes with Salt and Vinegar Content of Pickling Solution

2013 ◽  
Vol 61 (9) ◽  
pp. 2244-2252 ◽  
Author(s):  
Yuele Lu ◽  
Zhonghua Yang ◽  
Luyao Shen ◽  
Zhenmin Liu ◽  
Zhiqiang Zhou ◽  
...  
2020 ◽  
Vol 22 (24) ◽  
pp. 8728-8733
Author(s):  
Qun Liu ◽  
Dan Pan ◽  
Tingting Ding ◽  
Mengchao Ye ◽  
Fengjiao He

The spent pickling solution, which comes from the pickling process of iron and steel, is indispensable in the manufacturing industry.


2010 ◽  
Vol 146-147 ◽  
pp. 1621-1630 ◽  
Author(s):  
Sudin Izman ◽  
Mohammed Rafiq Abdul Kadir ◽  
Mahmood Anwar ◽  
Engku Mohammad Nazim ◽  
Low Yik Kuan ◽  
...  

Titanium alloys are commonly used in biomedical application in hard tissues replacement especially for knee and hip implants. Surface modifications are required prior to diamond coating process for improving the tribological and wear properties of the titanium alloy. In this study, experiments were carried out to investigate the effects of different pickling times as well as temperature on the adhesion strength of oxide layer formed on the Titanium alloy after oxidation process. The aqueous acid solution of HF and HNO3 was used as a pickling solution. The chemical pretreatment was carried out at 4 levels by varying the pickling time as well as temperature. All treated samples were thermally oxidized in a fixed parameters at 900 °C for 25 hours. Surface morphology, oxide layer thickness and adhesion strength were measured after each step using FESEM and Blast Wear Tester (BWT). It was revealed that the thickness of oxide layer increases with pickling time but the adhesion strengths become weaker. It was also found that the adhesion strength of oxide layer formed on Ti substrate surface increases with the increase of temperature while the thickness of the oxide layer decreased within 40oC pickling temperature.


2013 ◽  
Vol 726-731 ◽  
pp. 2655-2664
Author(s):  
Shih Chung Wang ◽  
Jun Yi Wu ◽  
Yun Hwei Shen

Pickling is a necessary process in many metal processing industries, such as wire rod, iron and steel sheet plate, and tubing processing industries, screw and nut manufacturing and processing industries, corrosion resistant plate processing industries, and paint industry. Pickling is used to remove black rust, oxides, and other contaminants from metal surfaces in order to improve processing quality. Hydrochloric acid is often used in the pickling process. As the acid concentration decreases gradually during the process, while metal (Fe and Zn) concentrations increase gradually, when the residual concentration of hydrochloric acid in the spent pickle liquor decreases to about 3%, or the specific gravity of spent pickle liquor is greater than 1.3 (iron ion concentration is greater than 100g/L), the aged pickle liquor must be discharged and fresh pickling solution is prepared. In the wire rod industry in Taiwan, the pickling process results in highly corrosive spent pickle liquor. Although there have been multiple resource processing schemes developed, including spray roasting process, fluidized bed roasting process, and sulfuric acid displacement process, it is limited to various factors, such as the treatment capacity, initial cost, operating cost, selling prices, purity of recycled products, and market scale. This study reviewed related patented processing modes in literature, and considered the reclamation cost of waste pickling solution (SPS). The proposed technique adopts wet-process metallurgy, combined with diffusion dialysis, for reclamation of SPS and mineralization crystallization of heavy metal of residue iron. The mineralization crystallization treatment produces high-purity recycled products of ferrite and goethite processes. SPS is reclaimed, and the ferric heavy metal recycling meets the economic benefit of an actual plant. The research site of this study produces 12 tons of SPS per day, which is about 300 tons monthly, and about 3,600 tons annually, with the removal cost of 7.2 million NTD annually. If the proposed treatment system is adopted, the costs of fresh hydrochloric acid, removal, and the traditional neutral agent treatment and subsequent landfill could be greatly reduced, thus effectively reducing the environmental load. In comparison to other recycling treatment techniques, the main advantage of the proposed technique is that the treatment capacity depends on the amount of SPS, the energy consumption is relatively low, the treatment scheme is simple, the operating and maintenance costs are low, and the mineralization can produce magnetic ferrite and iron oxide recycled products with high purity.


2016 ◽  
Vol 6 (3) ◽  
pp. 74-77
Author(s):  
Maryam Hosseini ◽  
◽  
Hasan Abbasinia ◽  
Abdorrasoul Malekpour ◽  
Tahereh Tarian ◽  
...  

2000 ◽  
Vol 42 (7-8) ◽  
pp. 283-290 ◽  
Author(s):  
H.-C. Tsai ◽  
R.-A. Doong

A sol-gel based fiber-optic biosensor with acetylcholinesterase as the biorecognition element has been developed for the rapid determination of organophosphorus pesticides. Nine fluorescent indicators, acridine, acridine orange, neutral red, DAPI, rhodamine B, fluorescein, umbelliferone, FITC on celite and FITC-dextran, have been examined to optimize the fiber-optic system. Results showed that acridine and FITCs were sensitive to the change of pH value caused by the enzyme-substrate catalysis reaction. However, the sensitivity of acridine was 260 times lower than that of FITCs. Higher toxicity of acridine to acetylcholinesterase than FITC was also observed. Moreover, the high-molecular-weight FITC-dextran showed low leakage rate when immobilizing using sol-gel technology, showing that the FITC-dextran was a suitable pH sensitive fluorescent indicator for the OPPs biosensor. The response of the fiber-optic biosensor to the substrate, acetylcholine, was highly reproducible (RSD=3.5%). A good linearity of acetylcholine in the range from 0.5 to 20 mM was also obtained (R2=0.98). Furthermore, a 30% inhibition can be achieved in 30min when 152 ppb paraoxon was added into the system. The results show the possibility for real-time determination of organophosphorus pesticides by using the biosensor developed in this study.


Crystals ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 714
Author(s):  
Gaber A. M. Mersal ◽  
Hamdy S. El-Sheshtawy ◽  
Mohammed A. Amin ◽  
Nasser Y. Mostafa ◽  
Amine Mezni ◽  
...  

The agricultural use of organophosphorus pesticides is a widespread practice with significant advantages in crop health and product yield. An undesirable consequence is the contamination of soil and groundwater by these neurotoxins resulting from over application and run-off. Here, we design and synthesize the mononuclear zinc(II) complexes, namely, [Zn(AMB)2Cl](ClO4) 1 and [Zn(AMB)2(OH)](ClO4) 2 (AMB = 2-aminomethylbenzimidazole), as artificial catalysts inspired by phosphotriesterase (PTE) for the hydrolysis of organophosphorus compounds (OPs) and simultaneously detect the organophosphate pesticides such as fenitrothion and parathion. Spectral and DFT (B3LYP/Lanl2DZ) calculations revealed that complexes 1 and 2 have a square-pyramidal environment around zinc(II) centers with coordination chromophores of ZnN4Cl and ZnN4O, respectively. Both 1 and 2 were used as a modifier in the construction of a biomimetic sensor for the determination of toxic OPs, fenitrothion and parathion, in phosphate buffer by square wave voltammetry. The hydrolysis of OPs using 1 or 2 generates p-nitrophenol, which is subsequently oxidized at the surface of the modified carbon past electrode. The catalytic activity of 2 was higher than 1, which is attributed to the higher electronegativity of the former. The oxidation peak potentials of p-nitrophenol were obtained at +0.97 V (vs. Ag/AgCl) using cyclic voltammetry (CV) and +0.88 V (vs. Ag/AgCl) using square wave voltammetry. Several parameters were investigated to evaluate the performance of the biomimetic sensor obtained after the incorporation of zinc(II) complex 1 and 2 on a carbon paste electrode (CPE). The calibration curve showed a linear response ranging between 1.0 μM (0.29 ppm) and 5.5 μM (1.6 ppm) for fenitrothion and 1.0 μM (0.28 ppm) and 0.1 μM (0.028 ppm) for parathion with a limit of detection (LOD) of 0.08 μM (0.022 ppm) and 0.51 μM (0.149 ppm) for fenitrothion and parathion, respectively. The obtained results clearly demonstrated that the CPE modified by 1 and 2 has a remarkable electrocatalytic activity towards the hydrolysis of OPs under optimal conditions.


Food Control ◽  
2021 ◽  
Vol 126 ◽  
pp. 108006
Author(s):  
Zahra Sarlak ◽  
Kianoush Khosravi-Darani ◽  
Milad Rouhi ◽  
Farhad Garavand ◽  
Reza Mohammadi ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document