Variation of Chemical Composition of the Lipophilic Extracts from Yellow Birch (Betula alleghaniensis) Foliage

2005 ◽  
Vol 53 (12) ◽  
pp. 4747-4756 ◽  
Author(s):  
Jean-Michel Lavoie ◽  
Tatjana Stevanovic
Keyword(s):  
Chemical Composition ◽  
Betula Alleghaniensis ◽  
Yellow Birch

Yield and composition of lipophylic extracts of yellow birch (Betula alleghaniensis Britton) as a function of wood age and aging under industrial conditions

Holzforschung ◽  
2006 ◽  
Vol 60 (2) ◽  
pp. 184-189 ◽  
Author(s):  
Jean-Michel Lavoie ◽  
Tatjana Stevanovic
Keyword(s):  
Chemical Composition ◽  
Storage Time ◽  
Age Groups ◽  
Tree Age ◽  
Betula Alleghaniensis ◽  
Yellow Birch ◽  
Lipophilic Extract ◽  
Industrial Processing ◽  
Wood Age ◽  
Industrial Samples

Abstract The lipophylic extracts of yellow birch (Betula alleghaniensis) have been investigated to detect the effect of tree age and wood storage time on extract composition. A total of 17 wood disks were cut from trees belonging to different age groups at 1 m above ground and the wood was milled as usual for extraction (laboratory samples). In addition, 49 sawdust samples were collected in a lumber mill to study the effect of industrial processing on the extractives (industrial samples). All laboratory and industrial samples were extracted with dichloromethane under sonication. The chemical composition of the lipophilic extracts obtained was analyzed by GC-MS. A systematic (quasi-linear) relationship was found between the lipophilic extract yield and specimen age. A total of 30 constituents from yellow birch extracts have been identified, 26 of which have never been previously reported for B. alleghaniensis wood.

Rare forest types in northeastern Ontario: a classification and analysis of representation in protected areas

2010 ◽  
Vol 40 (3) ◽  
pp. 423-435 ◽  
Author(s):  
Charles R. Drever ◽  
James Snider ◽  
Mark C. Drever
Keyword(s):  
Protected Areas ◽  
Local Population ◽  
Red Oak ◽  
Betula Alleghaniensis ◽  
White Pine ◽  
Yellow Birch ◽  
Eastern White Pine ◽  
Habitat Specificity ◽  
White Cedar ◽  
Eastern White Cedar

Our objective was to assess the relative rarity and representation within protected areas of Standard Forest Units (SFUs) in northeastern Ontario by applying the concepts of geographic range, habitat specificity, and local population size. SFUs are stand type classifications, routinely employed by forest managers, based on tree composition, disturbance history, and prescribed silvicultural system. We identified several SFUs as rare because of a narrow distribution, association with only one landform type, or lack of at least one stand larger than an ecoregion-specific threshold. In the Boreal forest, rare SFUs comprised stands dominated by eastern hemlock ( Tsuga canadensis (L.) Carrière), red oak ( Quercus rubra L.), yellow birch ( Betula alleghaniensis Britt.), or eastern white-cedar ( Thuja occidentalis L.). Rare SFUs also included eastern white pine ( Pinus strobus L.) and (or) red pine ( Pinus resinosa Ait.) leading stands managed by shelterwood or seed tree silviculture as well as low-lying deciduous stands and selection-managed stands of shade-tolerant species. In the Great Lakes – St. Lawrence forest, rare SFUs were yellow birch stands, stands dominated by conifer species abundant in the Boreal, and shelterwood-managed hardwood stands. Several rare SFUs had <12% of their total area in protection, i.e., stands dominated by eastern white pine, yellow birch, eastern white pine – red oak, or eastern white-cedar. These rare stand types require increased protection in reserves and tailored silvicultural practices to maintain their probability of persistence.

scholarly journals Tolerant hardwood natural regeneration 15 years after various silvicultural treatments on an industrial freehold of northwestern New Brunswick

2013 ◽  
Vol 89 (04) ◽  
pp. 512-524 ◽  
Author(s):  
Martin Béland ◽  
Bruno Chicoine
Keyword(s):  
New Brunswick ◽  
Natural Regeneration ◽  
Sugar Maple ◽  
Mineral Soil ◽  
Soil Disturbance ◽  
Betula Alleghaniensis ◽  
Yellow Birch ◽  
American Beech ◽  
Partial Cutting ◽  
Selection Cutting

We examined applicability of various partial cutting systems in order to regenerate tolerant hardwood stands dominated by sugar maple (Acer saccarhum), American beech (Fagus grandifolia) and yellow birch (Betula alleghaniensis) on northern New Brunswick J.D. Irving Ltd. freehold land. Sampling of 1065 one-m2 plots in 31 stands managed by selection cutting, shelterwood method and strip or patch cutting and in six control stands allowed a 15-year retrospective study of natural regeneration in stands of low residual densities and with minimal soil disturbance and no control of competing vegetation. Beech regeneration was most abundant in the patch cuts, yellow birch in shelterwood stands and sugar maple in the selection system areas. Results suggest that initial stand conditions influence the composition of the regeneration more than the prescribed treatment. At the stand scale (a few hectares), sugar maple recruitment was positively influenced by its proportion in the initial stand, and negatively by the cover of herbs and shrubs. Yellow birch regeneration was mainly affected by shrub competition. At the plot (1 m2) scale, mineral soil and decayed wood substrates and ground-level transmitted light were determinant factors for yellow birch regeneration. Beech-dominated stands were likely to regenerate to beech. A dense beech sucker understory was promoted in harvested patches. Areas with dense understory of American beech, shrubs, or herbs require site preparation to reduce interference either before or at the time of partial cutting. Shelterwood seed cutting and selection cutting should leave a residual of 12 m2/ha and 17 m2/ha respectively in seed trees uniformly distributed.

ELECTRIC POLARIZATION MEASUREMENTS ON YELLOW BIRCH

1964 ◽  
Vol 42 (6) ◽  
pp. 1270-1281 ◽  
Author(s):  
A. J. Nanassy
Keyword(s):  
Electric Field ◽  
Grain Orientation ◽  
Electric Polarization ◽  
Wide Frequency Range ◽  
Betula Alleghaniensis ◽  
Frequency Range ◽  
Yellow Birch ◽  
General Variation ◽  
Polarization Spectra ◽  
Frequency Temperature

Electric polarization spectra of oven-dry yellow birch (Betula alleghaniensis Britt.) were measured over the range of frequencies from 50 kc/s to 50 Mc/s and temperatures from 20° to 100 °C. These observations, which provide only a section of the total dispersion and relaxation absorption spectra of the material, give information on the general variation of the dispersion curve with frequency, temperature, and grain orientation to the electric field, and indicate that the total spectra spread over a wide frequency range, probably from 0 c/s to a few Gc/s and include several absorption peaks and dispersion curves.

Crown openness as influenced by tree and site characteristics for yellow birch, sugar maple, and eastern hemlock

2008 ◽  
Vol 38 (3) ◽  
pp. 488-497 ◽  
Author(s):  
Marie-Lou Lefrançois ◽  
Marilou Beaudet ◽  
Christian Messier
Keyword(s):  
Acer Saccharum ◽  
Sugar Maple ◽  
Forest Canopy ◽  
Light Transmission ◽  
Eastern Hemlock ◽  
Betula Alleghaniensis ◽  
Yellow Birch ◽  
Mature Trees ◽  
Regional Variability ◽  
Site Characteristics

Crown openness (CO) of mature trees influences light transmission within the forest canopy. However, in modeling, this variable is often considered constant within species, and its potential regional variability is ignored. The objective of this study was to evaluate if CO values of yellow birch ( Betula alleghaniensis Britt.), sugar maple ( Acer saccharum Marsh.), and eastern hemlock ( Tsuga canadensis (L.) Carrière) vary according to the following factors: (i) species, (ii) regional actual evapotranspiration (AET), (iii) tree size (i.e., diameter at breast height, DBH), and (iv) angle of transmission from zenith. To achieve this, CO was evaluated for 136 yellow birches, 109 sugar maples, and 68 hemlocks from different regions of western Quebec, southern Ontario, and northern Michigan. Results showed that all of the studied factors affected CO. While dominant trees can intercept light laterally as well as vertically, smaller trees are more efficient at intercepting light vertically. Increasing AET is associated with more open crowns. Given its importance in light transmission in the understory, a better understanding of how CO varies between individuals, species, and regions is needed.

Genetic diversity of yellow birch seedlings in Michigan

1977 ◽  
Vol 55 (22) ◽  
pp. 2778-2788 ◽  
Author(s):  
Kenneth A. Wearstler Jr. ◽  
Burton V. Barnes
Keyword(s):  
Seed Weight ◽  
Appalachian Mountains ◽  
Common Garden ◽  
Growing Season ◽  
Germination Percentage ◽  
Betula Alleghaniensis ◽  
Yellow Birch ◽  
Genetic Differentiation Of Populations ◽  
Physiographic Regions ◽  
Germinating Seeds

The objective of the study was to determine genetic differentiation of populations of yellow birch (Betula alleghaniensis Britton) along ecological gradients in Michigan and the Appalachian Mountains. Seeds were collected from populations in each of six physiographic regions of Michigan and in the northern and southern Appalachian Mountains. Seedlings were grown in a common garden in southeastern Michigan. First-year height of progeny, seed weight, initial germination, and germination percentage for 141 yellow birch trees in 30 populations were determined and compared.Significant differences were found among the six Michigan regions for all characters. Strong south–north clinal trends of decreasing height, increasing seed weight, earlier initial germination, and increasing total germination were revealed. Comparisons between physiographic regions showed that tall seedlings were produced by relatively light, late-germinating seeds. Within each region, however, seedlings from earlier germinating seeds tended to exhibit greater height growth. Significant differences were found among populations within a given region for specific characters. In the Appalachian Mountains, southern populations had taller progeny and lighter and poorer germinating seeds than northern populations.Regressions relating each character to 13 site variables were computed. Variation in total height and initial germination were interpreted as the result of differences in the length of the growing season associated with changes in elevation, terrain type, and aspect. Variation in seed weight was associated with differences in the length of growing season and soil moisture regimes.

Growth and morphological responses of yellow birch, sugar maple, and beech seedlings growing under a natural light gradient

1998 ◽  
Vol 28 (7) ◽  
pp. 1007-1015 ◽  
Author(s):  
Marilou Beaudet ◽  
Christian Messier
Keyword(s):  
Leaf Area ◽  
Sugar Maple ◽  
Fagus Grandifolia ◽  
Stem Length ◽  
Betula Alleghaniensis ◽  
Yellow Birch ◽  
Morphological Response ◽  
Area Index ◽  
Light Gradient ◽  
Morphological Responses

Height and lateral growth, biomass distribution, leaf morphology, and crown architecture were studied in yellow birch (Betula alleghaniensis Britton), sugar maple (Acer saccharum Marsh.), and beech (Fagus grandifolia Ehrh.) seedlings growing under 1-50% of above-canopy light in a sugar maple stand, in Quebec. All three species showed increasing growth with increasing light, but growth of yellow birch was higher and more responsive than that of sugar maple and beech. All three species showed typical sun-shade morphological responses, such as decreasing specific leaf area and leaf area ratio, and increasing leaf area index, with increasing light availability. Sugar maple was morphologically more plastic than the other species. It showed variations in biomass allocation to leaves and branches, a decrease in branch length to seedling height ratio, and a marked increase in the ratio of leaf area to stem length. Although our results clearly demonstrate the ability of these three species to modify several of their morphological features in response to variations in light, they do not show a clear relationship between species shade tolerance and morphological response to light variations. We suggest that species-specific developmental patterns may act as important constraints to morphological acclimation to light variation.

Decennial growth and mortality following uniform partial cutting in yellow birch – conifer stands

2013 ◽  
Vol 43 (3) ◽  
pp. 224-233 ◽  
Author(s):  
Marcel Prévost ◽  
Daniel Dumais
Keyword(s):  
Stand Structure ◽  
Block Design ◽  
Abies Balsamea ◽  
Acer Rubrum ◽  
Basal Area ◽  
Betula Alleghaniensis ◽  
Red Maple ◽  
Yellow Birch ◽  
Partial Cutting ◽  
Tree Survival

Estimating residual tree survival and growth is crucial for evaluating the overall merit of partial harvesting. In this case study, we present the effects of different cutting intensities (0%, 40%, 50%, and 60% of merchantable (diameter at breast height ≥ 9.1 cm) basal area (BA)) on the response of residual trees in two mixed yellow birch (Betula alleghaniensis Britt.) – conifer stands in eastern Quebec, Canada. Primarily aimed at promoting regeneration establishment, the experiment was conducted in two sites 90 km apart (Armagh and Duchesnay), each one containing four replicates of treatments in a randomized block design. Mortality after cutting decreased with increasing BA removal, but losses were two to three times higher at Armagh (62–138 stems/ha) than at Duchesnay (22–88 stems/ha). Loss of conifer stems involved primarily balsam fir (Abies balsamea (L.) Mill.) under natural conditions (control), whereas fir and red spruce (Picea rubens Sarg.) were equally affected in partial cuts. Red maple (Acer rubrum L.) and paper birch (Betula papyrifera Marsh.) were lost regardless of treatment. As a whole, growth in merchantable BA increased with cutting intensity. Uniform partial cuts produced good BA growth response from conifers at Armagh (0.27–0.28 m2·ha−1·year−1) and from hardwoods at Duchesnay (0.16–0.25 m2·ha−1·year−1), whereas BA growth was negligible for both species groups in the control. We examine the role of species composition and stand structure before cutting in the response of residual trees.

Leaf- and plant-level carbon gain in yellow birch, sugar maple, and beech seedlings from contrasting forest light environments

2000 ◽  
Vol 30 (3) ◽  
pp. 390-404 ◽  
Author(s):  
Marilou Beaudet ◽  
Christian Messier ◽  
David W Hilbert ◽  
Ernest Lo ◽  
Zhang M Wang ◽  
...  
Keyword(s):  
Acer Saccharum ◽  
Sugar Maple ◽  
Light Availability ◽  
Fagus Grandifolia ◽  
Carbon Gain ◽  
Betula Alleghaniensis ◽  
Yellow Birch ◽  
Significant Difference ◽  
Leaf Level ◽  
Plant Level

Leaf-level photosynthetic-light response and plant-level daily carbon gain were estimated for seedlings of moderately shade-tolerant yellow birch (Betula alleghaniensis Britton) and shade-tolerant sugar maple (Acer saccharum Marsh.) and beech (Fagus grandifolia Ehrh.) growing in gaps and under a closed canopy in a sugar maple stand at Duchesnay, Que. All three species had a higher photosynthetic capacity (Amax) in the gaps than in shade, but yellow birch and beech responded more markedly than sugar maple to the increase in light availability. The high degree of plasticity observed in beech suggests that the prediction that photosynthetic plasticity should decrease with increasing shade tolerance may not hold when comparisons are made among a few late-successional species. Unit-area daily carbon gain (CA) was significantly higher in the gaps than in shade for all three species, but no significant difference was observed between light environments for plant-level carbon gain (CW). In shade, we found no difference of CA and CW among species. In gaps, beech had a significantly higher CA than sugar maple but similar to that of birch, and birch had a significantly higher CW than maple but similar to that of beech. Sugar maple consistently had lower carbon gains than yellow birch and beech but is nevertheless the dominant species at our study site. These results indicate that although plant-level carbon gain is presumably more closely related to growth and survival of a species than leaf-level photosynthesis, it is still many steps removed from the ecological success of a species.

Sign in / Sign up

Export Citation Format

Share Document