Computation of molecular weight and weight fraction of five and six components in mixtures from model equilibrium ultracentrifugation data

1992 ◽  
Vol 40 (5) ◽  
pp. 824-829 ◽  
Author(s):  
Shuryo. Nakai ◽  
Masahiko. Nonaka
1993 ◽  
Vol 70 (06) ◽  
pp. 0978-0983 ◽  
Author(s):  
Edelmiro Regano ◽  
Virtudes Vila ◽  
Justo Aznar ◽  
Victoria Lacueva ◽  
Vicenta Martinez ◽  
...  

SummaryIn 15 patients with acute myocardial infarction who received 1,500,000 U of streptokinase, the gradual appearance of newly synthesized fibrinogen and the fibrinopeptide release during the first 35 h after SK treatment were evaluated. At 5 h the fibrinogen circulating in plasma was observed as the high molecular weight fraction (HMW-Fg). The concentration of HMW-Fg increased continuously, and at 20 h reached values higher than those obtained from normal plasma. HMW-Fg represented about 95% of the total fibrinogen during the first 35 h. The degree of phosphorylation of patient fibrinogen increased from 30% before treatment to 65% during the first 5 h, and then slowly declined to 50% at 35 h.The early rates of fibrinopeptide A (FPA) and phosphorylated fibrinopeptide A (FPAp) release are higher in patient fibrinogen than in isolated normal HMW-Fg and normal fibrinogen after thrombin addition. The early rate of fibrinopeptide B (FPB) release is the same for the three fibrinogen groups. However, the late rate of FPB release is higher in patient fibrinogen than in normal HMW-Fg and normal fibrinogen. Therefore, the newly synthesized fibrinogen clots faster than fibrinogen in the normal steady state.In two of the 15 patients who had occluded coronary arteries after SK treatment the HMW-Fg and FPAp levels increased as compared with the 13 patients who had patent coronary arteries.These results provide some support for the idea that an increased synthesis of fibrinogen in circulation may result in a procoagulant tendency. If this is so, the HMW-Fg and FPAp content may serve as a risk index for thrombosis.


1981 ◽  
Vol 46 (03) ◽  
pp. 612-616 ◽  
Author(s):  
U Schmitz-Huebner ◽  
L Balleisen ◽  
F Asbeck ◽  
J van de Loo

SummaryHigh and low molecular weight heparin fractions obtained by gel filtration chromatography of sodium mucosal heparin were injected subcutaneously into six healthy volunteers and compared with the unfractionated substance in a cross-over trial. Equal doses of 5,000 U were administered twice daily over a period of three days and heparin activity was repeatedly controlled before and 2, 4, 8 hrs after injection by means of the APTT, the anti-Xa clotting test and a chromogenic substrate assay. In addition, the in vivo effect of subcutaneously administered fractionated heparin on platelet function was examined on three of the volunteers. The results show that s.c. injections of the low molecular weight fraction induced markedly higher anti-Xa activity than injections of the other preparations. At the same time, APTT results did not significantly differ. Unfractionated heparin and the high molecular weight fraction enhanced ADP-induced platelet aggregation and collagen-mediated MDA production, while the low molecular weight fraction hardly affected these assays, but potently inhibited thrombin-induced MDA production. All heparin preparations stimulated the release of platelet Factor 4 in plasma. During the three-day treatment periods, no side-effects and no significant changes in the response to heparin injections were detected.


1968 ◽  
Vol 108 (4) ◽  
pp. 641-646 ◽  
Author(s):  
A. Polson ◽  
W. Katz

1. The preparation of tanned gelatin spheres and granules from high-molecular-weight gelatin is described. This material is comparatively hard, giving high flow rates, is insoluble in water at temperatures between 0° and 100° and is resistant to digestion by trypsin and chymotrypsin. The high-molecular-weight fraction of gelatin was prepared by precipitation with polyethylene glycol, and the spheres and granules prepared from this fraction were hardened and insolubilized by tanning with either formalin or chromium salts or both. 2. The spheres and granules were used successfully for the separation of protein molecules and other protein-aceous materials ranging in molecular weight from 200 to greater than 6000000. This gel exclusion material has several properties superior to those of other products used for similar purposes. Further, it was noticed that the porosity of the spheres differed considerably from that of the granules.


Author(s):  
Jingtao Duan ◽  
Zhiyuan Xu ◽  
Zhen Yang ◽  
Jie Jiang

Redox-active humic acids (HA) are ubiquitous in terrestrial and aquatic systems and are involved in numerous electron transfer reactions affecting biogeochemical processes and fates of pollutants in soil environments. Redox-active contaminants are trapped in soil micropores (<2 nm) that have limited access to microbes and HA. Therefore, the contaminants whose molecular structure and properties are not damaged accumulate in the soil micropores and become potential pollution sources. Electron transfer capacities (ETC) of HA reflecting redox activities of low molecular weight fraction (LMWF, <2.5) HA can be detected by an electrochemical method, which is related to redox potentials (Eh) in soil and aquatic environments. Nevertheless, electron accepting capacities (EAC) and electron donating capacities (EDC) of these LMWF HA at different Eh are still unknown. EDC and EAC of different molecular weight HA at different Eh were analyzed using electrochemical methods. EAC of LMWF at −0.59 V was 12 times higher than that at −0.49 V, while EAC increased to 2.6 times when the Eh decreased from −0.59 V to −0.69 V. Afterward, LMWF can act as a shuttle to stimulate microbial Fe(III) reduction processes in microbial reduction experiments. Additionally, EAC by electrochemical analysis at a range of −0.49–−0.59 V was comparable to total calculated ETC of different molecular weight fractions of HA by microbial reduction. Therefore, it is indicated that redox-active functional groups that can be reduced at Eh range of −0.49–−0.59 are available to microbial reduction. This finding contributes to a novel perspective in the protection and remediation of the groundwater environment in the biogeochemistry process.


2007 ◽  
Vol 28 (10) ◽  
pp. 2149-2153 ◽  
Author(s):  
Radoslav Goldman ◽  
Habtom W. Ressom ◽  
Mohamed Abdel-Hamid ◽  
Lenka Goldman ◽  
Antai Wang ◽  
...  

1965 ◽  
Vol 49 (1) ◽  
pp. 131-149 ◽  
Author(s):  
F. Norman Briggs ◽  
Martin Fleishman

A high molecular weight fraction of a soluble Marsh muscle-relaxing preparation has been shown to contain a calcium-complexing substance. By examining the nature of the competition between this fraction and chelex-100 for calcium at various total calcium concentrations it has been possible to calculate the concentration and calcium stability constant of this calcium-complexing substance. Taking into account dilutions which occur during the preparation of fractions containing this substance its concentration may be estimated at about 2·10-4 in muscle and its calcium stability constant was found to be about 1.5·105 M-1. Preliminary evidence suggests that the calcium-binding substance is a protein.


2006 ◽  
Vol 54 (11-12) ◽  
pp. 421-428 ◽  
Author(s):  
T. Kakimolo ◽  
Y. Imai ◽  
N. Funamizu ◽  
T. Takakuwa ◽  
M. Kunimoto

Bio-Toilet is the name of a dry closet or composting toilet using sawdust as an artificial soil matrix for bioconversion of human excrement into compost. Since feces and urine contain several chemicals such as pharmaceutical residues and endocrine disruptors and they may still remain in compost after biological reaction in the Bio-Toilet, it is required to examine the possibility of soil and/or groundwater pollution by applying compost to a soil system in farmland. In this study, toxicity of Bio-Toilet compost was evaluated by measuring the viability of human neuroblast (NB-1). The bio-assay was applied to the water extract of compost from the Bio-Toilets which are in practical use in Japan. The assay results showed that (1) the extract of feces showed no toxicity, and the extracts of unused sawdust had no or low level toxicity and (2) the extracts of composts had heavier toxicity than unused sawdust. These results implied that some chemicals that have toxicity were generated by biological reactions or accumulated in toilet system. The bio-assay results with fractionated organic matter by its molecular weight showed that the small molecular weight fraction had stronger toxicity than other fractions. The effect of inorganic matter on toxicity was examined by comparing the dose-response relationship of the extracts of compost with positive control with 1M of sodium chloride solution. The comparison showed that sodium concentration in the extract was too low to develop the toxicity and the effect of inorganic matter could be neglected in this study.


1953 ◽  
Vol 26 (1) ◽  
pp. 102-114 ◽  
Author(s):  
I. M. Kolthoff ◽  
R. G. Gutmacher

Abstract The sorption capacities toward GR-S five commercial carbon blacks are in decreasing order: Spheron-6, Vulcan-1, Philblack-0, Sterling-105, Philblack-A. Apparently, the sorption is not related to surface area. The sorption on Vulcan-1 of GR-S from its solutions in seven different solvents or mixtures of solvents increases with decreasing solvent power for the rubber. The sorption curves of two “cold rubbers,” polymerized at −10 and +5° respectively, showed little difference from that of 50° GR-S. Previous heating of carbon black in nitrogen at 500 or 1100° increased the sorption by about 20 per cent over unheated carbon. Air-heating of carbon black at 425° did not cause a difference in the sorption from benzene solution, but produced an increase in the sorption of rubber from n-heptane solution. In the range 75% butadiene-25% styrene to 5% butadiene-95% styrene, there is practically no effect of the degree of unsaturation on the sorption. Polystyrene of high intrinsic viscosity exhibits a peculiar behavior with furnace blacks. Vulcan-1 sorbed microgel as well as the sol fraction from n-heptane solutions of GR-S containing microgel (conversion 74.7 and 81.5 per cent). There was no appreciable difference in the amount of sorption of rubber fractions having average molecular weights varying from 433,000 to 85,000. There is little change in the amount sorbed after two hours of shaking, but the intrinsic viscosity of the residual rubber decreases with time. The low molecular-weight rubber is sorbed more rapidly, but is slowly replaced by the more tightly sorbed high molecular weight fraction. Partial fractionation of a rubber sample can be achieved by allowing the rubber solution to flow through a column of weakly sorbing carbon black. A large portion of the sorbed rubber can be recovered from the column by washing it with a good solvent such as xylene. Bound rubber is produced by intimate mixing of equal parts of carbon black and rubber swollen in chloroform, when the mixture is dried in vacuum at 80° or at room temperature. Milling is not essential to get bound rubber.


2015 ◽  
Vol 37 (1) ◽  
pp. 55-67 ◽  
Author(s):  
Gregory W. Thomas ◽  
Leonard T. Rael ◽  
Charles W. Mains ◽  
Denetta Slone ◽  
Matthew M. Carrick ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document