Solubility of Multicomponent Systems in the Biodiesel Production by Transesterification ofJatrophacurcasL. Oil with Methanol

2006 ◽  
Vol 51 (3) ◽  
pp. 1130-1135 ◽  
Author(s):  
Hui Zhou ◽  
Houfang Lu ◽  
Bin Liang
Keyword(s):  
Biodiesel Production ◽  
Multicomponent Systems

A standard for transmission electron spectroscopy

1978 ◽  
Vol 36 (1) ◽  
pp. 530-531 ◽  
Author(s):  
Dennis Maher ◽  
David Joy ◽  
Peggy Mochel
Keyword(s):  
Thin Films ◽  
Electron Spectroscopy ◽  
Host Lattice ◽  
Single Element ◽  
Multicomponent Systems ◽  
Transmission Electron ◽  
Major Interest ◽  
Standard Specimens ◽  
Forms Of Carbon ◽  
Electron Energy Loss

A variety of standard specimens is needed in order to systematically investigate the instrumentation, specimen, data reduction and quantitation variables in electron energy-loss spectroscopy (EELS). Pure single element specimens (e.g. various forms of carbon) have received considerable attention to date but certain elements of interest cannot be prepared directly as thin films. Since studies of the first and second row elements in two- or multicomponent systems will be of considerable importance in microanalysis using EELS, there is a need for convenient standards containing these species. For many investigations a standard should contain the desired element, or elements, homogeneously dispersed through a suitable matrix and at an accurately known concentration. These conditions may be met by the technique of implantation.Silicon was chosen as the host lattice since its principal ionization energies, EL23 = 98 eV and Ek = 1843 eV, are well removed from the K-edges of most elements of major interest such as boron (Ek = 188 eV), carbon (Ek = 283 eV), nitrogen (Ek = 400 eV) and oxygen (Ek = 532 eV).

Biodiesel production from non-edible oils: A review

2020 ◽  
pp. 149-159
Author(s):  
Jatinder Kataria ◽  
Saroj Kumar Mohapatra ◽  
Amit Pal
Keyword(s):  
Environmental Impact ◽  
Energy Demand ◽  
Fossil Fuels ◽  
World Wide ◽  
Edible Oils ◽  
Control Measure ◽  
Biodiesel Production ◽  
Pollution Level ◽  
Animal Fats ◽  
The World

The limited fossil reserves, spiraling price and environmental impact due to usage of fossil fuels leads the world wide researchers’ interest in using alternative renewable and environment safe fuels that can meet the energy demand. Biodiesel is an emerging renewable alternative fuel to conventional diesel which can be produced from both edible and non-edible oils, animal fats, algae etc. The society is in dire need of using renewable fuels as an immediate control measure to mitigate the pollution level. In this work an attempt is made to review the requisite and access the capability of the biodiesel in improving the environmental degradation.

PENGARUH PELARUT KLOROFORM DALAM PEMURNIAN GLISEROL DENGAN PROSES ASIDIFIKASI ASAM KLORIDA

2016 ◽  
Vol 5 (3) ◽  
pp. 38-43
Author(s):  
Windi Monica Surbakti ◽  
Gerson Rico M.H ◽  
Mersi Suriani Sinaga
Keyword(s):  
Fatty Acid ◽  
Volume Ratio ◽  
Biodiesel Production ◽  
Extraction Time ◽  
Glycerol Concentration ◽  
Purification Process ◽  
Soap Content ◽  
Test Volume ◽  
Base Content ◽  
Water Salt

Glycerol as a byproduct of biodiesel production was approximately formed 10% of the biodiesel weight. Impurities which contained in the glycerol such as catalyst, soap, methanol, water, salt, and matter organic non glycerol (MONG) have a significant effect on the glycerol concentration. So, it is necessary to treat the impurities. The purpose of this study is to know the effect of chloroform to glycerol purification process with acidification method using hydrochloric acid as pretreatment process. This research was begun with acid addition to the glycerol to neutralize the base content and to split the soap content into free fatty acid and salt, that are more easily separated from glycerol. Then the process was continued with extraction by the solvent chloroform using the variable of test volume ratio (v/v) (1:1, 1:1.5, 1:2)  and the extraction time (20, 40, and 60 minutes). The results showed that the more volume of solvent used, gave less extraction time to produce high purity of glycerol. The highest purity produced in this study amounted to 90,9082% is obtained at the ratio of the volume solvent (v/v) 1:1 with extraction time 60 minutes.

Biodiesel Production from Microalgae

2013 ◽  
Vol 2 (2) ◽  
Author(s):  
M. Mohammadi ◽  
M. Azizollahi-Aliabadi
Keyword(s):  
Biodiesel Production

USE OF NORTHERN ECOTYPE SOYBEANS FOR BIOFUEL PRODUCTION

2020 ◽  
pp. 22-30
Author(s):  
SERGEY N. DEVYANIN ◽  
◽  
VLADIMIR A. MARKOV ◽  
ALEKSANDR G. LEVSHIN ◽  
TAMARA P. KOBOZEVA ◽  
...  
Keyword(s):  
Diesel Engine ◽  
Soybean Oil ◽  
Diesel Fuel ◽  
Experimental Studies ◽  
Motor Fuel ◽  
Biodiesel Production ◽  
Biofuel Production ◽  
Exhaust Gases ◽  
Oil Productivity ◽  
Toxic Components

The paper presents the results of long-term research on the oil productivity and chemical composition of soybean oil of the Northern ecotype varieties in the Central Non-Black Earth Region. The authors consider its possible use for biodiesel production. Experiments on growing soybeans were carried out on the experimental fi eld of Russian State Agrarian University –Moscow Timiryazev Agricultural Academy (2008-2019) on recognized ultra-early ripening varieties of the Northern ecotype Mageva, Svetlaya, Okskaya (ripeness group 000). Tests were set and the research results were analyzed using standard approved methods. It has been shown that in conditions of high latitudes (57°N), limited thermal resources of the Non-Chernozem zone of Russia (the sum of active temperatures of the growing season not exceeding 2000°С), the yield and productivity of soybeans depend on the variety and moisture supply. Over the years, the average yield of soybeans amounted to 1.94 … 2.62 t/ha, oil productivity – 388 … 544 kg/ha, oil content – 19…20%, the content of oleic and linoleic fatty acids in oil – 60%, and their output from seeds harvested – 300 kg/ha. It has been established that as soybean oil and diesel fuel have similar properties,they can be mixed by conventional methods in any proportions and form stable blends that can be stored for a long time. Experimental studies on the use of soybean oil for biodiesel production were carried out on a D-245 diesel engine (4 ChN11/12.5). The concentrations of toxic components (CO, CHx, and NOx) in the diesel exhaust gases were determined using the SAE-7532 gas analyzer. The smoke content of the exhaust gases was measured with an MK-3 Hartridge opacimeter. It has been experimentally established that the transfer of a diesel engine from diesel fuel to a blend of 80% diesel fuel and 20% lubrication oil leads to a change in the integral emissions per test cycle: nitrogen oxides in 0.81 times, carbon monoxide in 0.89 times and unburned hydrocarbons in 0.91 times, i.e. when biodiesel as used as a motor fuel in a serial diesel engine, emissions of all gaseous toxic components are reduced. The study has confi rmed the expediency of using soybeans of the Northern ecotype for biofuel production.

A TECHNO-ECONOMIC ANALYSIS OF BIODIESEL PRODUCTION FROM MICROALGAE

2013 ◽  
Vol 12 (8) ◽  
pp. 1563-1573 ◽  
Author(s):  
Giuseppe Olivieri ◽  
Teresa Guida ◽  
Piero Salatino ◽  
Antonio Marzocchella
Keyword(s):  
Economic Analysis ◽  
Biodiesel Production
Sign in / Sign up

Export Citation Format

Share Document