scholarly journals Biomimetic Design of Reversibly Unfolding Cross-Linker to Enhance Mechanical Properties of 3D Network Polymers

2007 ◽  
Vol 129 (46) ◽  
pp. 14110-14111 ◽  
Author(s):  
Aaron M. Kushner ◽  
Vahe Gabuchian ◽  
Evan G. Johnson ◽  
Zhibin Guan
Keyword(s):  
Mechanical Properties ◽  
Biomimetic Design ◽  
Network Polymers ◽  
3D Network ◽  
Cross Linker

scholarly journals Tannic-Acid-Cross-Linked and TiO2-Nanoparticle-Reinforced Chitosan-Based Nanocomposite Film

Polymers ◽  
2021 ◽  
Vol 13 (2) ◽  
pp. 228
Author(s):  
Swarup Roy ◽  
Lindong Zhai ◽  
Hyun Chan Kim ◽  
Duc Hoa Pham ◽  
Hussein Alrobei ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tannic Acid ◽  
Nanocomposite Film ◽  
Food Packaging ◽  
Titanium Dioxide Nanoparticles ◽  
Casting Technique ◽  
Active Food Packaging ◽  
Reinforcing Agent ◽  
Solution Casting Technique ◽  
Cross Linker

A chitosan-based nanocomposite film with tannic acid (TA) as a cross-linker and titanium dioxide nanoparticles (TiO2) as a reinforcing agent was developed with a solution casting technique. TA and TiO2 are biocompatible with chitosan, and this paper studied the synergistic effect of the cross-linker and the reinforcing agent. The addition of TA enhanced the ultraviolet blocking and mechanical properties of the chitosan-based nanocomposite film. The reinforcement of TiO2 in chitosan/TA further improved the nanocomposite film’s mechanical properties compared to the neat chitosan or chitosan/TA film. The thermal stability of the chitosan-based nanocomposite film was slightly enhanced, whereas the swelling ratio decreased. Interestingly, its water vapor barrier property was also significantly increased. The developed chitosan-based nanocomposite film showed potent antioxidant activity, and it is promising for active food packaging.

scholarly journals Recyclable Self-Healing Polyurethane Cross-Linked by Alkyl Diselenide with Enhanced Mechanical Properties

Polymers ◽  
2019 ◽  
Vol 11 (5) ◽  
pp. 773 ◽  
Author(s):  
Yuqing Qian ◽  
Xiaowei An ◽  
Xiaofei Huang ◽  
Xiangqiang Pan ◽  
Jian Zhu ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Room Temperature ◽  
Amide Bond ◽  
Self Healing ◽  
Healing Efficiency ◽  
Polyurethane Networks ◽  
Combined Action ◽  
Cross Linker ◽  
Dynamic Structures ◽  
External Interventions

Dynamic structures containing polymers can behave as thermosets at room temperature while maintaining good mechanical properties, showing good reprocessability, repairability, and recyclability. In this work, alkyl diselenide is effectively used as a dynamic cross-linker for the design of self-healing poly(urea–urethane) elastomers, which show quantitative healing efficiency at room temperature, without the need for any catalysts or external interventions. Due to the combined action of the urea bond and amide bond, the material has better mechanical properties. We also compared the self-healing effect of alkyl diselenide-based polyurethanes and alkyl disulfide-based polyurethanes. The alkyl diselenide has been incorporated into polyurethane networks using a para-substituted amine diphenyl alkyl diselenide. The resulting materials not only exhibit faster self-healing properties than the corresponding disulfide-based materials, but also show the ability to be processed at temperatures as low as 60 °C.

Three-Dimensional Graphite Filled Poly(Vinylidene Fluoride) Composites with Enhanced Strength and Thermal Conductivity

2020 ◽  
Vol 842 ◽  
pp. 63-68
Author(s):  
Xiao Zhang ◽  
Jian Zheng ◽  
Yong Qiang Du ◽  
Chun Ming Zhang
Keyword(s):  
Mechanical Properties ◽  
Thermal Conductivity ◽  
Energetic Materials ◽  
High Performance ◽  
Vinylidene Fluoride ◽  
3D Structure ◽  
Three Dimensional ◽  
3D Network ◽  
Poly Vinylidene Fluoride ◽  
Polymer Bonded Explosives

Three-dimensional (3D) network structure has been recognized as an efficient approach to enhance the mechanical and thermal conductive properties of polymeric composites. However, it has not been applied in energetic materials. In this work, a fluoropolymer based composite with vertically oriented and interconnected 3D graphite network was fabricated for polymer bonded explosives (PBXs). Here, the graphite and graphene oxide platelets were mixed, and self-assembled via rapid freezing and using crystallized ice as the template. The 3D structure was finally obtained by freezing-dry, and infiltrating with polymer. With the increasing of filler fraction and cooling rate, the thermal conductivity of the polymer composite was significantly improved to 2.15 W m-1 K-1 by 919% than that of pure polymer. Moreover, the mechanical properties, such as tensile strength and elastic modulus, were enhanced by 117% and 563%, respectively, when the highly ordered structure was embedded in the polymer. We attribute the increased thermal and mechanical properties to this 3D network, which is beneficial to the effective heat conduction and force transfer. This study supports a desirable way to fabricate the strong and thermal conductive fluoropolymer composites used for the high-performance polymer bonded explosives (PBXs).

scholarly journals Development of Photocrosslinkable Urethane-Doped Polyester Elastomers for Soft Tissue Engineering

2011 ◽  
Vol 1 (1) ◽  
pp. 18-31 ◽  
Author(s):  
Yi Zhang ◽  
Richard T. Tran ◽  
Dipendra Gyawali ◽  
Jian Yang
Keyword(s):  
Mechanical Properties ◽  
Tissue Engineering ◽  
Soft Tissue ◽  
Hexamethylene Diisocyanate ◽  
Elongation At Break ◽  
Thermally Induced ◽  
Molar Ratios ◽  
3D Network ◽  
Soft Tissue Engineering

Finding an ideal biomaterial with the proper mechanical properties and biocompatibility has been of intense focus in the field of soft tissue engineering. This paper reports on the synthesis and characterization of a novel crosslinked urethane-doped polyester elastomer (CUPOMC), which was synthesized by reacting a previously developed photocrosslinkable poly (octamethylene maleate citrate) (POMC) prepolymers (pre-POMC) with 1,6-hexamethylene diisocyanate (HDI) followed by thermo- or photo-crosslinking polymerization. The mechanical properties of the CUPOMCs can be tuned by controlling the molar ratios of pre-POMC monomers, and the ratio between the prepolymer and HDI. CUPOMCs can be crosslinked into a 3D network through polycondensation or free radical polymerization reactions. The tensile strength and elongation at break of CUPOMC synthesized under the known conditions range from 0.73±0.12MPa to 10.91±0.64MPa and from 72.91±9.09% to 300.41±21.99% respectively. Preliminary biocompatibility tests demonstrated that CUPOMCs support cell adhesion and proliferation. Unlike the pre-polymers of other crosslinked elastomers, CUPOMC pre-polymers possess great processability demonstrated by scaffold fabrication via a thermally induced phase separation method. The dual crosslinking methods for CUPOMC pre-polymers should enhance the versatile processability of the CUPOMC used in various conditions. Development of CUPOMC should expand the choices of available biodegradable elastomers for various biomedical applications such as soft tissue engineering.

scholarly journals Powder Metallurgy Processing and Mechanical Properties of Controlled Ti-24Nb-4Zr-8Sn Heterogeneous Microstructures

Metals ◽  
2020 ◽  
Vol 10 (12) ◽  
pp. 1626
Author(s):  
Benoît Fer ◽  
David Tingaud ◽  
Azziz Hocini ◽  
Yulin Hao ◽  
Eric Leroy ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Powder Metallurgy ◽  
Ball Milling ◽  
Processing Route ◽  
Fine Grain ◽  
Plasma Sintering ◽  
3D Network ◽  
Spark Plasma ◽  
Powder Particles ◽  
Heterogeneous Microstructures

This paper gives some insights into the fabrication process of a heterogeneous structured β-metastable type Ti-24Nb-4Zr-8Sn alloy, and the associated mechanical properties optimization of this biocompatible and low elastic modulus material. The powder metallurgy processing route includes both low energy mechanical ball milling (BM) of spherical and pre-alloyed powder particles and their densification by Spark Plasma Sintering (SPS). It results in a heterogeneous microstructure which is composed of a homogeneous 3D network of β coarse grain regions called “core” and α/β dual phase ultra-fine grain regions called “shell.” However, it is possible to significantly modify the microstructural features of the alloy—including α phase and shell volume fractions—by playing with the main fabrication parameters. A focus on the role of the ball milling time is first presented and discussed. Then, the mechanical behavior via shear tests performed on selected microstructures is described and discussed in relation to the microstructure and the probable underlying deformation mechanism(s).

A vinylic rotaxane cross-linker for toughened network polymers from the radical polymerization of vinyl monomers

2017 ◽  
Vol 8 (12) ◽  
pp. 1878-1881 ◽  
Author(s):  
J. Sawada ◽  
D. Aoki ◽  
M. Kuzume ◽  
K. Nakazono ◽  
H. Otsuka ◽  
...  
Keyword(s):  
Radical Polymerization ◽  
Vinyl Monomers ◽  
Network Polymers ◽  
Cross Linker ◽  
Vinyl Group

A [2]rotaxane cross-linker with one vinyl group in each component was synthesized as a vinylic cross-linker for highly toughened network polymers.

Sign in / Sign up

Export Citation Format

Share Document