AbstractElectrospun (ESP) scaffolds are a promising type of tissue engineering constructs for large defects with limited depth. To form new functional tissue, the scaffolds need to be infiltrated with cells, which will deposit extracellular matrix. However, due to dense fiber packing and small pores, cell and tissue infiltration of ESP scaffolds is limited. Here, we combine two established methods, increasing fiber diameter and co-spinning sacrificial fibers, to create a porous ESP scaffold that allows robust tissue infiltration. Full cell infiltration across 2 mm thick scaffolds is seen 3 weeks after subcutaneous implantation in rats. After 6 weeks, the ESP scaffolds are almost fully filled with de novo tissue. Cell infiltration and tissue formation in vivo in this thickness has not been previously achieved. In addition, we propose a novel method for in vitro cell seeding to improve cell infiltration and a model to study 3D migration through a fibrous mesh. This easy approach to facilitate cell infiltration further improves previous efforts and could greatly aid tissue engineering approaches utilizing ESP scaffolds.Statement of significanceElectrospinning creates highly porous scaffolds with nano- to micrometer sized fibers and are a promising candidate for a variety of tissue engineering applications. However, smaller fibers also create small pores which are difficult for cells to penetrate, restricting cells to the top layers of the scaffolds. Here, we have improved the cell infiltration by optimizing fiber diameter and by co-spinning a sacrificial polymer. We developed novel culture technique that can be used to improve cell seeding and to study cytokine driven 3D migration through fibrous meshes. After subcutaneous implantation, infiltration of tissue and cells was observed up to throughout up to 2 mm thick scaffolds. This depth of infiltration in vivo had not yet been reported for electrospun scaffolds. The scaffolds we present here can be used for in vitro studies of migration, and for tissue engineering in defects with a large surface area and limited depth.
Adipose-Derived Stem Cells Promote Angiogenesis and Tissue Formation for In Vivo Tissue Engineering