Development and Implementation of a Real-Time Control System for Nitrogen Removal Using OUR and ORP as End Points

2005 ◽  
Vol 44 (9) ◽  
pp. 3367-3373 ◽  
Author(s):  
Sebastià Puig ◽  
Lluís Corominas ◽  
M. Teresa Vives ◽  
M. Dolors Balaguer ◽  
Jesús Colprim ◽  
...  
Keyword(s):  
Control System ◽  
Real Time ◽  
Nitrogen Removal ◽  
Real Time Control ◽  
End Points ◽  
Time Control

Nitrogen Removal in a Real-Time Controlled Sequencing Batch Membrane Bioreactor

2010 ◽  
Vol 5 (3) ◽  
Author(s):  
Cheng-Nan Chang ◽  
Li-Ling Lee ◽  
Han-Hsien Huang ◽  
Ying-Chih Chiu
Keyword(s):  
Real Time ◽  
Nitrogen Removal ◽  
Membrane Bioreactor ◽  
Synthetic Wastewater ◽  
Real Time Control ◽  
Time Control ◽  
Cake Layer ◽  
On Line ◽  
Solid Liquid ◽  
Solid Liquid Separation

The performance of a real-time controlled Sequencing Batch Membrane Bioreactor (SBMBR) for removing organic matter and nitrogen from synthetic wastewater has been investigated in this study under two specific ammonia loadings of 0.0086 and 0.0045g NH4+-N gVSS−1 day−1. Laboratory results indicate that both COD and DOC removal are greater than 97.5% (w/w) but the major benefit of using membrane for solid-liquid separation is that the effluent can be decanted through the membrane while aeration is continued during the draw stage. With a continued aeration, the sludge cake layer is prevented from forming thus alleviating the membrane clogging problem in addition to significant nitrification activities observed in the draw stage. With adequate aeration in the oxic stage, the nitrogen removal efficiency exceeding 99% can be achieved with the SBMBR system. Furthermore, the SBMBR system has also been used to study the occurrence of ammonia valley and nitrate knee that can be used for real-time control of the biological process. Under appropriate ammonia loading rates, applicable ammonia valley and nitrate knee are detected. The real-time control of the SBMBR can be performed based on on-line ORP and pH measurements.

A New Flexible Rapid Thermal Processing System

1995 ◽  
Vol 389 ◽  
Author(s):  
K. C. Saraswat ◽  
Y. Chen ◽  
L. Degertekin ◽  
B. T. Khuri-Yakub
Keyword(s):  
Control System ◽  
Real Time ◽  
Processing System ◽  
Process Conditions ◽  
Temperature Uniformity ◽  
Real Time Control ◽  
Wafer Temperature ◽  
Time Control ◽  
Wide Range ◽  
Optical Flux

ABSTRACTA highly flexible Rapid Thermal Multiprocessing (RTM) reactor is described. This flexibility is the result of several new innovations: a lamp system, an acoustic thermometer and a real-time control system. The new lamp has been optimally designed through the use of a “virtual reactor” methodology to obtain the best possible wafer temperature uniformity. It consists of multiple concentric rings composed of light bulbs with horizontal filaments. Each ring is independently and dynamically controlled providing better control over the spatial and temporal optical flux profile resulting in excellent temperature uniformity over a wide range of process conditions. An acoustic thermometer non-invasively allows complete wafer temperature tomography under all process conditions - a critically important measurement never obtained before. For real-time equipment and process control a model based multivariable control system has been developed. Extensive integration of computers and related technology for specification, communication, execution, monitoring, control, and diagnosis demonstrates the programmability of the RTM.

Sign in / Sign up

Export Citation Format

Share Document