PI/PID Controller Design Based on Direct Synthesis and Disturbance Rejection

2002 ◽  
Vol 41 (19) ◽  
pp. 4807-4822 ◽  
Author(s):  
Dan Chen ◽  
Dale E. Seborg
Keyword(s):  
Disturbance Rejection ◽  
Pid Controller ◽  
Controller Design ◽  
Direct Synthesis ◽  
Pid Controller Design

scholarly journals PID gain tuning for Robust Control of PMDC Motor with tracking and disturbance rejection through H∞

2019 ◽  
Vol 9 (1) ◽  
pp. 4097-4102
Keyword(s):  
Robust Control ◽  
Disturbance Rejection ◽  
Pid Controller ◽  
High Efficiency ◽  
Controller Design ◽  
Low Cost ◽  
Optimization Approach ◽  
Industrial Control ◽  
Control Approach ◽  
Pid Controller Design

Permanent-magnet (PM) motors are employed in numerous industrial control applications for their high efficiency, simple mechanism and low cost. In most of the applications, either the plant model is inaccurately defined or the plant parameters are prone to variations over period of time. Also, in most of the applications, have a requirement of good tracking as well as good disturbance rejection, two competing requirements. The controller should cater to the parameter variations as well as provide robust performance against external disturbances and hence requires a robust control approach towards designing a controller. A classical PID controller, which lacks robustness requirements is augmented by H∞ optimization based gain tuning to meet the robustness requirements. This paper discusses a PID controller design using H∞ optimization approach. Different performance goals for tracking and disturbance rejection are defined and PID gains are tuned to meet the goals in H∞ sense. A commercial Maxon RE35 motor is selected for modeling and simulation

scholarly journals PID Controller Design for TITO Processes Based on IMC and Smith Predictor Configuration

2019 ◽  
Vol 8 (6S4) ◽  
pp. 1522-1526
Keyword(s):  
Time Delay ◽  
Disturbance Rejection ◽  
Pid Controller ◽  
Controller Design ◽  
Control Design ◽  
Smith Predictor ◽  
Point Tracking ◽  
Pid Controller Design ◽  
Reduced Time

This paper describes the design of ProportionalIntegral-Derivative (PID) controller for two variable processes where the two variables need to control. Design of controllers for such a process is too difficult than single variable processes because of interrelations between the two variables present in the system. Hence, the design approach should include the interrelations of the variables to achieve better performance of the processes. In addition to this, the time delay of the processes is also considered and Smith Predictor (SP) configuration is used to reduce the delay in the processes. For the resultant reduced time delay processes, an IMC approach is used to design PID controller. The proposed control system improves both the servo (set point tracking) and regulatory (disturbance rejection) performance of the system. The proposed configuration is also validated using a case study. The simulation results are presented and compared with the other similar approaches to show the efficacy of the proposed method

scholarly journals PID Controller Design for Tito Processes Based on IMC and Smith Predictor Configuration

2019 ◽  
Vol 8 (2S3) ◽  
pp. 1060-1063
Keyword(s):  
Time Delay ◽  
Disturbance Rejection ◽  
Pid Controller ◽  
Controller Design ◽  
Smith Predictor ◽  
Proportional Integral Derivative ◽  
Point Tracking ◽  
Pid Controller Design ◽  
Reduced Time

This paper describes the design of Proportional-Integral-Derivative (PID) controller for two variable processes where the two variables need to control. Design of controllers for such a process is too difficult than single variable processes because of interrelations between the two variables present in the system. Hence, the design approach should include the interrelations of the variables to achieve better performance of the processes. In addition to this, the time delay of the processes is also considered and Smith Predictor (SP) configuration is used to reduce the delay in the processes. For the resultant reduced time delay processes, an IMC approach is used to design PID controller. The proposed control system improves both the servo (set point tracking) and regulatory (disturbance rejection) performance of the system. The proposed configuration is also validated using a case study. The simulation results are presented and compared with the other similar approaches to show the efficacy of the proposed method.

Sign in / Sign up

Export Citation Format

Share Document