Polymer Pendant Ligand Chemistry. 3. A Biomimetic Approach to Selective Metal Ion Removal and Recovery from Aqueous Solution with Polymer-Supported Sulfonated Catechol and Linear Catechol Amide Ligands

1995 ◽  
Vol 34 (11) ◽  
pp. 2813-2819 ◽  
Author(s):  
Song-Ping Huang ◽  
Wei Li ◽  
Katherine J. Franz ◽  
Robert L. Albright ◽  
Richard H. Fish
Keyword(s):  
Aqueous Solution ◽  
Metal Ion ◽  
Metal Ion Removal ◽  
Ion Removal ◽  
Amide Ligands ◽  
Biomimetic Approach ◽  
Polymer Supported ◽  
Removal And Recovery

scholarly journals Heavy Metal Removal from Aqueous Solution Using Biosurfactants Produced by Pseudomonas aeruginosa with Corn Oil as Substrate

2018 ◽  
Vol 18 (3) ◽  
pp. 472
Author(s):  
Venty Suryanti ◽  
Sri Hastuti ◽  
Tutik Dwi Wahyuningsih ◽  
Mudasir Mudasir ◽  
Dian Kresnadipayana ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Heavy Metal ◽  
Metal Ions ◽  
Contact Time ◽  
Metal Ion ◽  
Metal Removal ◽  
Corn Oil ◽  
Metal Ion Removal ◽  
Ion Removal ◽  
Removal Capacity

The batch removal of Cu(II), Cd(II) and Pb(II) from individual heavy metal ion aqueous synthetic solution using biosurfactants produced by Pseudomonas aeruginosa with corn oil as substrate was investigated. The metal ion removal process of crude preparation biosurfactants (CPB) was established to be dependent on the initial pH and contact time. The optimum metal removal was observed at pH 6.0 of the initial metal solution and 10 min of contact time. The affinity sequence for metal ion removal was Pb(II)>Cd(II)>Cu(II). The removal capacity value of biosurfactant for Cu(II), Cd(II) and Pb(II) from single metal ions solution were 0.169, 0.276 and 0.323 mg/g, respectively. The removal capacity value of biosurfactant for Cu(II), Cd(II) and Pb(II) from multi metal ions solution were 0.064, 0.215 and 0.275 mg/g, respectively. The removal capacity of individual metal ion was diminished by the presence of other metal ions in multi metal ions from synthetic aqueous solution. The removal capacity value of biosurfactant for Cu(II), Cd(II) and Pb(II) from silver industry wastewater were 0.027, 0.055 and 0.291 mg/g, respectively. The results indicated that biosurfactants have potential to be used in the remediation of heavy metals in industrial wastewater.

scholarly journals Removal of Cd (II) ions from Aqueous Solution by Adsorption on Activated Carbon Prepared from Lapsi (Choerospondias axillaris) Seed Stone

2016 ◽  
Vol 11 (1) ◽  
pp. 140-150 ◽  
Author(s):  
Rajeshwar Man Shrestha
Keyword(s):  
Aqueous Solution ◽  
Activated Carbon ◽  
Metal Ion ◽  
Activated Carbons ◽  
Freundlich Isotherm ◽  
Batch Adsorption ◽  
Metal Ion Removal ◽  
Ion Removal ◽  
Equilibrium Data ◽  
Methylene Blue Number

Batch adsorption experiments were conducted for the adsorption of Cd (II) ions from aqueous solution by activated carbon prepared from Lapsi seed stone. The activated carbon was characterized by Iodine number, Methylene blue number, SEM and FTIR. Adsorption experiments were carried out to describe the effect of pH ,contact time and  adsorbent dose on the metal ion removal process .The results showed that the adsorption of Cd (II) ions was very fast initially and the equilibrium time was 3 hrs.The pH of 6.0 was an optimal pH for adsorption  of Cd(II) ions. Langmuir and Freundlich adsorption isotherms were used to explain the equilibrium data. Langmuir model best described the data with higher value of coeffcient of determination as −1 compared to that of Freundlich isotherm showing a maximum uptake of 37.0 mgg . This study demonstrated that the activated carbons prepared from Lapsi seed stone could be used for the removal of Cd (II) ions in water treatment. Journal of the Institute of Engineering, 2015, 11(1): 140-150

Thermoresponsive Ion-Imprinted Composite Hydrogels for Heavy Metal Ion Removal

2013 ◽  
Vol 661 ◽  
pp. 162-165 ◽  
Author(s):  
Jing Jing Wang ◽  
Xian Ning Li
Keyword(s):  
Aqueous Solution ◽  
Heavy Metal ◽  
Metal Ion ◽  
Heavy Metal Ions ◽  
Metal Ion Removal ◽  
Ion Removal ◽  
Ion Imprinted ◽  
Heavy Metal Ion Removal ◽  
Gel Transition

A novel thermoresponsive Cu(II) ion-imprinted composite hydrogel [Cu(II)-IICH] based on N-isopropylacrylamide (NIPAM) and aminated silica (SiO2-NH2) has been prepared by in situ free-radical polymerization using Cu(II) ion as template. The Cu(II)-IICH was used to remove heavy metal ions from aqueous solution at 20 and 40oC. The Cu(II)-IICH selectively bound the template ion above a critical gel transition temperature (CGTT) of crosslinked poly(N-isopropylacrylamide) (PNIPAM). The memory was fixed by shrinking above the CGTT, and was deleted by swelling below the CGTT. In order to study the reusability of the Cu(II)-IICH, the sorption-desorption cycles were performed for five times. The results suggested that the Cu(II)-IICH can be used for several times without significantly decreasing its adsorption capacity.

Metal ion removal from aqueous solution using physic seed hull

2010 ◽  
Vol 179 (1-3) ◽  
pp. 363-372 ◽  
Author(s):  
Masita Mohammad ◽  
Saikat Maitra ◽  
Naveed Ahmad ◽  
Azmi Bustam ◽  
T.K. Sen ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Metal Ion ◽  
Metal Ion Removal ◽  
Ion Removal ◽  
Seed Hull

Metal Ion Removal from Aqueous Solution by Liquid Phase Polymer-Based Retention Technique

2006 ◽  
Vol 235 (1) ◽  
pp. 152-160 ◽  
Author(s):  
Bernabé L. Rivas ◽  
Eduardo D. Pereira ◽  
Pamela Robles ◽  
Rocío Cid
Keyword(s):  
Aqueous Solution ◽  
Liquid Phase ◽  
Metal Ion ◽  
Metal Ion Removal ◽  
Ion Removal

scholarly journals Preparation and characterization of andisol-zeolite-fly ash-activated carbon (AZFC) as potential adsorbent for metal ion removal

2020 ◽  
Author(s):  
Antonius Agus Bambang Haryanto ◽  
Ari Handono Ramelan ◽  
MTh Sri Budiastuti ◽  
Pranoto
Keyword(s):  
Activated Carbon ◽  
Fly Ash ◽  
Metal Ion ◽  
Metal Ion Removal ◽  
Ion Removal
Sign in / Sign up

Export Citation Format

Share Document