Wavelength Effects in Photochemical Oxidation of Organic Pollutants in Waste Water

1972 ◽  
Vol 11 (3) ◽  
pp. 451-454
Author(s):  
C. Y. Cha ◽  
J. M. Smith
1971 ◽  
Vol 10 (4) ◽  
pp. 509-514 ◽  
Author(s):  
Victor Schorr ◽  
Bruno Boval ◽  
Vladislav Hancil ◽  
J. M. Smith

Author(s):  
Andrew Wirnkor Verla ◽  
E.N. Verla ◽  
P. Adowei ◽  
A. Briggs ◽  
M. Horsfall

Five composite samples of waste water were collected from waste water tank of a vegetable oil refining company and were analyzed for physiochemical characteristics, heavy metal and organic pollutants. Physicochemical determinations were done according to standard methods; heavy metals were determined by use of Atomic Absorption Spectrophotometer method while organic pollutants were determined by Gas chromatography system HP 6890 series. Sulphate was determined by vanadomolybdophosphoric acid method while phosphates and chlorides were determined by argentometric method. Results reveal that effluent pH (4.67 ±0.015), salinity (125 ±4.50 %) and BOD5 (17.83 ±1.70 mg/l) were bellow WHO standard whereas TDS (127.7 ±5.77 mg/l), TSS (563.6 ±3.15 mg/l) and COD (3959 ±3.8 mg/l) were above WHO standards. Heavy metal pollution index (0.31) showed no multi-element contamination arising from effluent. The degree of contamination (1.84) showed that the effluent has a moderate polluting potential. Lower molecular weight PAHs showed a significant difference even though most of the organic compounds in vegetable oil refinery wastewater showed good biodegradability that varied weekly. Therefore there is either no treatment or an in effective treatment of the effluents. This could result to serious environmental problems in the near future.


2020 ◽  
Vol 509 ◽  
pp. 145378 ◽  
Author(s):  
Xiaoyuan Liao ◽  
Fan Wang ◽  
Yinzhi Wang ◽  
Yi Cai ◽  
Haitang Liu ◽  
...  

Author(s):  
Saika Ahmed ◽  
Gulshan Ara ◽  
Md. Abu Bin Hasan Susan

Abstract: In recent years, nanomaterials as photocatalysts have gained much popularity for the removal of organic pollutants from tainted water using photodegradation, since the available chemical, physical, and biological methods often are time consuming, involve high cost and dumping complications, sometimes posing serious threat to both human health and environmental elements. Use of nanomaterials is less expensive and does not, in general, form aggregated macromolecules. In addition, nanotechnology for waste-water treatment demolishes or alters the risky chemical wastes to harmless end products like H2O and CO2. Nanomaterials synthesized from natural resources or prepared using green synthetic routes are receiving surge of interest as our consciousness to ecological environment and safety rises. ‘Green’ materials of this kind might also show unique strength features and exceptional biodegradability, along with their other notable advantageous properties like minimum threat to environment, efficient recyclablity and low cost compared to synthetic nanomaterials. Such green nanomaterials can also serve as nanocatalysts to treat toxic organic pollutants in a safer way, including photodegradation to less or non-toxic products. This article reviews latest developments on the synthesis of some promising green nanomaterials aiming towards their efficient uses as photocatalysts for degradation of organic pollutants. Strategies to find new green materials as photocatalysts by modification of technologies, and development of novel methodologies for safer treatment of organic pollutants will also be discussed.


2018 ◽  
Vol 156 ◽  
pp. 03048 ◽  
Author(s):  
Alin Elita Esther Sarajar ◽  
Refa Putri Ramadhania ◽  
Purwanto Purwanto

Cassava (Manihot utilissima) is the main raw material of tapioca flour industry. The tapioca industry waste water still contains high enough BOD, COD, and cyanide, above the quality standard of industrial waste water. Photo-Fenton is one of the most effective alternative methods of degrading organic pollutants. This study aims to determine the effect of Photo-Fenton method on the degradation of organic pollutants such as COD and cyanide. For operating conditions of this study use the addition of concentrations of H2O2 and FeSO4.7H2O and different UV light intensity. The analysis of COD concentration using SNI method is spectrophotometric. From the research result, it is found that the concentration of COD and cyanide in tapioca waste can be reduced by using Photo-Fenton method. With initial COD content of 6000 mg/L and cyanide level of 0.67 mg/L. And in the operating conditions of the addition of 5 ml/l of H2O2, Fe2+ 1.25 mg/l, and light intensity of 200 lm, the highest COD and cyanide levels were found to be 900 mg/l for COD and 0.08 mg/l for cyanide. Final levels of COD up to 900 mg/l and cyanide concentrations up to 0.08 mg/l.


2012 ◽  
Vol 538-541 ◽  
pp. 2285-2288 ◽  
Author(s):  
Bing Liu ◽  
Ai Min Li ◽  
Ming Fang Xia ◽  
Zhao Lian Zhu

Catalyst with manganese oxide highly dispersed on granular activated carbon (MnOx/GAC) was fabricated by impregnating GAC in MnCl2 solution and characterized by several techniques. The performance of manganese catalyst was investigated in catalytic ozonation of 4-chlorophenol in water. Manganese catalyst exhibits better efficiency than the original granular activated carbon, due to the synergic effect between activated carbon and manganese oxide. MnOx/GAC, produced by a simple methodin situ, is promising in catalytic ozonation of refractory organic pollutants in waste water.


Sign in / Sign up

Export Citation Format

Share Document