Comparative study of direct and alternating current electric and magnetic precipitation from laminar and turbulent flows

1981 ◽  
Vol 20 (3) ◽  
pp. 207-216 ◽  
Author(s):  
Jeffrey C. Alexander ◽  
Kent R. Davey ◽  
James R. Melcher
Keyword(s):  
Comparative Study ◽  
Turbulent Flows ◽  
Alternating Current ◽  
Laminar And Turbulent Flows

A numerical study on combined baffles quick-separation device

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Ehsan Dehdarinejad ◽  
Morteza Bayareh ◽  
Mahmud Ashrafizaadeh
Keyword(s):  
Turbulent Flows ◽  
Separation Efficiency ◽  
Numerical Study ◽  
Turbulence Models ◽  
Complete Separation ◽  
Solid Particles ◽  
Flow Rates ◽  
Separation Device ◽  
Coupling Technique ◽  
Laminar And Turbulent Flows

Abstract The transfer of particles in laminar and turbulent flows has many applications in combustion systems, biological, environmental, nanotechnology. In the present study, a Combined Baffles Quick-Separation Device (CBQSD) is simulated numerically using the Eulerian-Lagrangian method and different turbulence models of RNG k-ε, k-ω, and RSM for 1–140 μm particles. A two-way coupling technique is employed to solve the particles’ flow. The effect of inlet flow velocity, the diameter of the splitter plane, and solid particles’ flow rate on the separation efficiency of the device is examined. The results demonstrate that the RSM turbulence model provides more appropriate results compared to RNG k-ε and k-ω models. Four thousand two hundred particles with the size distribution of 1–140 µm enter the device and 3820 particles are trapped and 380 particles leave the device. The efficiency for particles with a diameter greater than 28 µm is 100%. The complete separation of 22–28 μm particles occurs for flow rates of 10–23.5 g/s, respectively. The results reveal that the separation efficiency increases by increasing the inlet velocity, the device diameter, and the diameter of the particles.

Numerical Simulation Study on the Asymmetric Structures of Oscillatory Flow Field in a Baffled Tube Reactor

2004 ◽  
Author(s):  
Yong-Wen Wu ◽  
Jia Wu
Keyword(s):  
Numerical Simulation ◽  
Turbulent Flows ◽  
Oscillatory Flow ◽  
Numerical Technique ◽  
Three Dimensional ◽  
Structured Grid ◽  
Tube Reactor ◽  
Oscillating Boundary ◽  
The Asymmetry ◽  
Laminar And Turbulent Flows

The oscillatory flow in a baffled tube reactor provides a significant enhancement of radial transfer of momentum, heat and mass and a good control of axial back mixing at a wide range of net flow rate. But little has been known about reliable details of the three-dimensional structure of flow field in this kind of flow because most published studies in the area were based on the two-dimensional simulation techniques. This paper implemented a three-dimensional numerical simulation study on the asymmetry of flow pattern in the baffled tube reactor which was observed experimentally. A systematic study by numerical simulation was carried out which covered a range of oscillatory Reynolds number (Reo) from 100 to 5,000 and employed models respectively for laminar and turbulent flows. It was found in the simulation that under symmetric boundary conditions the transition from axially symmetric flow to asymmetric one depended on the numerical technique employed in simulation. With a structured grid frame the transition occurred at Reo much greater than that with an unstructured grid frame, for both laminar and turbulent flows. It is not rational that the onset of the transition changes with the accuracy of numerical technique. Based on the simulation results, it was postulated that the asymmetry appeared in simulations with symmetric boundary conditions might result from the accumulation of calculation errors but the asymmetry observed in experiments might result from the slight asymmetry of geometry which exists inevitably in any experiment apparatus. To explore the influence of the slight asymmetry of geometry, the effect of the eccentricity of baffles and the declination of oscillating boundary were studied by use of the finite volume method with a structured grid and adaptive time steps. The simulation result showed that both the eccentricity of baffles and the declination of oscillating boundary have obvious influence on the asymmetry of flow patterns for laminar and turbulent flow. More details were discussed in the paper.

A Viscous-Inviscid Interaction Procedure—Part 1: Method for Computing Two-Dimensional Incompressible Separated Channel Flows

1986 ◽  
Vol 108 (1) ◽  
pp. 64-70 ◽  
Author(s):  
O. K. Kwon ◽  
R. H. Pletcher
Keyword(s):  
Experimental Data ◽  
Finite Difference ◽  
Turbulent Flows ◽  
Inviscid Flow ◽  
Companion Paper ◽  
Separated Flows ◽  
Two Dimensional ◽  
Boundary Layer Equations ◽  
Interaction Scheme ◽  
Laminar And Turbulent Flows

A viscous-inviscid interaction scheme has been developed for computing steady incompressible laminar and turbulent flows in two-dimensional duct expansions. The viscous flow solutions are obtained by solving the boundary-layer equations inversely in a coupled manner by a finite-difference scheme; the inviscid flow is computed by numerically solving the Laplace equation for streamfunction using an ADI finite-difference procedure. The viscous and inviscid solutions are matched iteratively along displacement surfaces. Details of the procedure are presented in the present paper (Part 1), along with example applications to separated flows. The results compare favorably with experimental data. Applications to turbulent flows over a rearward-facing step are described in a companion paper (Part 2).

scholarly journals Penalty Function Finite Element Analysis of Steady Viscous Incompressible Flow in Rotating Coordinates

1984 ◽  
Author(s):  
M. C. Rosen ◽  
P. E. Allaire ◽  
J. G. Rice
Keyword(s):  
Finite Element ◽  
Turbulent Flows ◽  
Penalty Function ◽  
Experimental Measurements ◽  
Element Analysis ◽  
Viscous Incompressible Flow ◽  
Incompressible Viscous Flow ◽  
Rotating Coordinates ◽  
Rotating Channel ◽  
Laminar And Turbulent Flows

Finite element methods for incompressible viscous flow in turbomachines have not been presented in the literature previously. This paper develops a penalty function primitive variable method including Coriolis and centrifugal force terms for steady flow in a rotating coordinate system. Simplex elements are used with the result of solution times comparable to equivalent finite different solutions. Example cases considered are Couette flow, Poiseuille flow, flow over a step and flow in a rotating channel. Both laminar and turbulent flows are discussed. The accuracy of computed solutions compares well with theoretical solutions and experimental measurements.

scholarly journals Direct numerical simulation of intermittent turbulence under stably stratified conditions

2015 ◽  
Vol 2 (1) ◽  
pp. 179-241 ◽  
Author(s):  
P. He ◽  
S. Basu
Keyword(s):  
Numerical Simulation ◽  
Direct Numerical Simulation ◽  
Turbulent Flows ◽  
Open Channel ◽  
Temporal Evolution ◽  
Intermittent Turbulence ◽  
Bursting Events ◽  
Spatio Temporal ◽  
Channel Region ◽  
Laminar And Turbulent Flows

Abstract. In this paper, we simulate intermittent turbulence (also known as bursting events) in stably stratified open-channel flows using direct numerical simulation. Clear signatures of this intriguing phenomenon are observed for a range of stabilities. However, the spatio-temporal characteristics of intermittency are found to be strongly stability-dependent. In general, the bursting events are much more frequent near the bottom wall than in the upper-channel region. A steady coexistence of laminar and turbulent flows is detected at various horizontal planes in very stable cases. This spatially intermittent pattern is found to propagate downstream and strongly correlate with the temporal evolution of intermittency. Last, a long standing hypothesis by Blackadar, i.e., the strong connection between local stability and intermittent turbulence, is corroborated by this modeling study.

Sign in / Sign up

Export Citation Format

Share Document