Analysis of SO2Sorption Capacity of Rice Husk Ash (RHA)/CaO/NaOH Sorbents Using Response Surface Methodology (RSM): Untreated and Pretreated RHA

2008 ◽  
Vol 42 (5) ◽  
pp. 1499-1504 ◽  
Author(s):  
Irvan Dahlan ◽  
Keat Teong Lee ◽  
Azlina Harun Kamaruddin ◽  
Abdul Rahman Mohamed
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Rice Husk ◽  
Rice Husk Ash

scholarly journals Optimization of Adhesion Strength and Microstructure Properties by Using Response Surface Methodology in Enhancing the Rice Husk Ash-Based Geopolymer Composite Coating

Polymers ◽  
2020 ◽  
Vol 12 (11) ◽  
pp. 2709
Author(s):  
Mohd Salahuddin Mohd Basri ◽  
Faizal Mustapha ◽  
Norkhairunnisa Mazlan ◽  
Mohd Ridzwan Ishak
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Composite Coating ◽  
Adhesion Strength ◽  
Rice Husk ◽  
Rice Husk Ash ◽  
Offshore Structures ◽  
Interfacial Bonding ◽  
Curing Temperature ◽  
High Adhesion

As a result of their significant importance and applications in vast areas, including oil and gas, building construction, offshore structures, ships, and bridges, coating materials are regularly exposed to harsh environments which leads to coating delamination. Therefore, optimum interfacial bonding between coating and substrate, and the reason behind excellent adhesion strength is of utmost importance. However, the majority of studies on polymer coatings have used a one-factor-at-a-time (OFAT) approach. The main objective of this study was to implement statistical analysis in optimizing the factors to provide the optimum adhesion strength and to study the microstructure of a rice husk ash (RHA)-based geopolymer composite coating (GCC). Response surface methodology was used to design experiments and perform analyses. RHA/alkali activated (AA) ratio and curing temperature were chosen as factors. Adhesion tests were carried out using an Elcometer and a scanning electron microscope was used to observe the microstructure. Results showed that an optimum adhesion strength of 4.7 MPa could be achieved with the combination of RHA/AA ratio of 0.25 and curing temperature at 75 °C. The microstructure analysis revealed that coating with high adhesion strength had good interfacial bonding with the substrate. This coating had good wetting ability in which the coating penetrated the valleys of the profiles, thus wetting the entire substrate surface. A large portion of dense gel matrix also contributed to the high adhesion strength. Conversely, a large quantity of unreacted or partially reacted particles may result in low adhesion strength.

scholarly journals Durability performance of pervious concrete containing rice husk ash and calcium carbide: A response surface methodology approach

2021 ◽  
Vol 14 ◽  
pp. e00547
Author(s):  
Musa Adamu ◽  
Kingsley Oyime Ayeni ◽  
Sadi Ibarahim Haruna ◽  
Yasser El-Husseini Ibrahim Mansour ◽  
Sani Haruna
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Rice Husk ◽  
Rice Husk Ash ◽  
Calcium Carbide ◽  
Pervious Concrete ◽  
Durability Performance

Optimization of Production Conditions for Activated Carbons from Rice Husk by Potassium Carbonate Using Response Surface Methodology

2014 ◽  
Vol 1053 ◽  
pp. 303-310 ◽  
Author(s):  
Mian Wu Meng ◽  
Cong Liang Qi ◽  
Qing Ye Liu ◽  
Liang Lv ◽  
Hao Ai ◽  
...  
Keyword(s):  
Response Surface Methodology ◽  
Adsorption Capacity ◽  
Response Surface ◽  
Rice Husk ◽  
Activated Carbons ◽  
Total Pore Volume ◽  
Nitrogen Adsorption ◽  
Average Pore ◽  
Activation Temperature ◽  
Nitrogen Adsorption Isotherm

A three-factor-three-level experiment was developed by the central composite design (CCD) and Response surface methodology to discuss the effects of concentration of K2CO3, activation temperature and time on the adsorption capacity of the activated carbon (AC) derived from the rice husk and to identify the key preparation parameters. The performance of the AC was characterized by nitrogen adsorption isotherm as Brunauer–Emmett–Teller (BET) and scanning electron microscope (SEM), respectively. The optimal parameters were obtained: Rice husk was soaked in K2CO3 solution (2.32 mol/L) with an impregnation ratio (rice husk: K2CO3=1:3) (wt. %), activated at 1239 K for 0.48 h. The results showed that iodine adsorption capacity of the AC was 1268.52 mg/g, the error between the models predicted (1356.98 mg/g) was only 6.2%. The AC has a large apparent surface area (SBET = 1312 m2/g), total pore volume (0.78 cm3/g) and average pore diameter (11.92 Å).

Sign in / Sign up

Export Citation Format

Share Document