Influence of Water Quality on the Embodied Energy of Drinking Water Treatment

2014 ◽  
Vol 48 (5) ◽  
pp. 3084-3091 ◽  
Author(s):  
Mark V. E. Santana ◽  
Qiong Zhang ◽  
James R. Mihelcic
Keyword(s):  
Water Quality ◽  
Drinking Water ◽  
Water Treatment ◽  
Drinking Water Treatment ◽  
Embodied Energy ◽  
Influence Of Water

scholarly journals Natural organic matter removal by ion exchange at different positions in the drinking water treatment lane

2013 ◽  
Vol 6 (1) ◽  
pp. 1-10 ◽  
Author(s):  
A. Grefte ◽  
M. Dignum ◽  
E. R. Cornelissen ◽  
L. C. Rietveld
Keyword(s):  
Water Quality ◽  
Drinking Water ◽  
Organic Matter ◽  
Water Treatment ◽  
Organic Carbon ◽  
Natural Organic Matter ◽  
Drinking Water Treatment ◽  
Biological Stability ◽  
Sand Filtration ◽  
Slow Sand Filtration

Abstract. To guarantee a good water quality at the customers tap, natural organic matter (NOM) should be (partly) removed during drinking water treatment. The objective of this research was to improve the biological stability of the produced water by incorporating anion exchange (IEX) for NOM removal. Different placement positions of IEX in the treatment lane (IEX positioned before coagulation, before ozonation or after slow sand filtration) and two IEX configurations (MIEX® and fluidized IEX (FIX)) were compared on water quality as well as costs. For this purpose the pre-treatment plant at Loenderveen and production plant Weesperkarspel of Waternet were used as a case study. Both, MIEX® and FIX were able to remove NOM (mainly the HS fraction) to a high extent. NOM removal can be done efficiently before ozonation and after slow sand filtration. The biological stability, in terms of assimilable organic carbon, biofilm formation rate and dissolved organic carbon, was improved by incorporating IEX for NOM removal. The operational costs were assumed to be directly dependent of the NOM removal rate and determined the difference between the IEX positions. The total costs for IEX for the three positions were approximately equal (0.0631 € m−3), however the savings on following treatment processes caused a cost reduction for the IEX positions before coagulation and before ozonation compared to IEX positioned after slow sand filtration. IEX positioned before ozonation was most cost effective and improved the biological stability of the treated water.

scholarly journals Integration of target analyses, non-target screening and effect-based monitoring to assess OMP related water quality changes in drinking water treatment

2020 ◽  
Vol 705 ◽  
pp. 135779 ◽  
Author(s):  
Andrea M. Brunner ◽  
Cheryl Bertelkamp ◽  
Milou M.L. Dingemans ◽  
Annemieke Kolkman ◽  
Bas Wols ◽  
...  
Keyword(s):  
Water Quality ◽  
Drinking Water ◽  
Water Treatment ◽  
Drinking Water Treatment ◽  
Quality Changes ◽  
Target Screening

Understanding the impacts of sodium silicate on water quality and iron oxide particles

2019 ◽  
Vol 5 (8) ◽  
pp. 1360-1370 ◽  
Author(s):  
Bofu Li ◽  
Benjamin F. Trueman ◽  
Mohammad Shahedur Rahman ◽  
Yaohuan Gao ◽  
Yuri Park ◽  
...  
Keyword(s):  
Water Quality ◽  
Drinking Water ◽  
Iron Oxide ◽  
Water Treatment ◽  
Sodium Silicate ◽  
Bacterial Growth ◽  
Drinking Water Treatment ◽  
Iron Oxide Particles ◽  
Oxide Particles

Silicates represent an alternative drinking water treatment for colour and turbidity due to iron. They may avoid the drawbacks of polyphosphates: increased lead solubility, the potential for increased bacterial growth, and phosphorus in wastewater.

scholarly journals Small-scale drinking water treatment unit of filtration and UV disinfection for remote area

2020 ◽  
Vol 20 (6) ◽  
pp. 2106-2118
Author(s):  
Kassim Chabi ◽  
Jie Zeng ◽  
Lizheng Guo ◽  
Xi Li ◽  
Chengsong Ye ◽  
...  
Keyword(s):  
Water Quality ◽  
Drinking Water ◽  
Water Treatment ◽  
Organic Carbon ◽  
Dissolved Organic Carbon ◽  
Bacterial Community Composition ◽  
Drinking Water Treatment ◽  
Small Scale ◽  
Treatment Unit ◽  
Remote Areas

Abstract People in remote areas are still drinking surface water that may contain certain pollutants including harmful microorganisms and chemical compounds directly without any pretreatment. In this study, we have designed and operated a pilot-scale drinking water treatment unit as part of our aim to find an economic and easily operable technology for providing drinking water to people in those areas. Our small-scale treatment unit contains filtration and disinfection (UV–C irradiation) stages to remove pollutants from source water. The water quality index was determined based on various parameters such as pH, temperature, dissolved oxygen, nitrate, nitrite, ammonium, phosphorus, dissolved organic carbon and bacteria. Water and media samples after DNA extraction were sequenced using Illumina MiSeq throughput sequencing for the determination of bacterial community composition. After the raw water treatment, the reduction of bacteria concentration ranged from 1 to 2 log10. The average removal of the turbidity, ammonium, nitrite, phosphorus and dissolved organic carbon reached up to 95.33%, 85.71%, 100%, 28.57%, and 45%, respectively. In conclusion, multiple biological stages in our designed unit showed an improvement of the drinking water quality. The designed drinking treatment unit produces potable water meeting standards at a lower cost of operation and it can be used in remote areas.

scholarly journals Trihalomethane precursor reactivity changes in drinking water treatment unit processes during a storm event

2019 ◽  
Vol 19 (7) ◽  
pp. 2098-2106
Author(s):  
Chelsea W. Neil ◽  
Yingying Zhao ◽  
Amy Zhao ◽  
Jill Neal ◽  
Maria Meyer ◽  
...  
Keyword(s):  
Water Quality ◽  
Drinking Water ◽  
Water Treatment ◽  
Treatment Plant ◽  
Drinking Water Treatment ◽  
Plant Performance ◽  
Storm Event ◽  
Source Water ◽  
Treatment Unit ◽  
Source Water Quality

Abstract Source water quality can significantly impact the efficacy of water treatment unit processes and the formation of chlorinated and brominated trihalomethanes (THMs). Current water treatment plant performance models may not accurately capture how source water quality variations, such as organic matter variability, can impact treatment unit processes. To investigate these impacts, a field study was conducted wherein water samples were collected along the treatment train for 72 hours during a storm event. Systematic sampling and detailed analyses of water quality parameters, including non-purgeable organic carbon (NPOC), UV absorbance, and THM concentrations, as well as chlorine spiking experiments, reveal how the THM formation potential changes in response to treatment unit processes. Results show that the NPOC remaining after treatment has an increased reactivity towards forming THMs, and that brominated THMs form more readily than chlorinated counterparts in a competitive reaction. Thus both the reactivity and quantity of THM precursors must be considered to maintain compliance with drinking water standards, a finding that should be incorporated into the development of model-assisted treatment operation and optimization. Advanced granular activated carbon (GAC) treatment beyond conventional coagulation–flocculation–sedimentation processes may also be necessary to remove the surge loading of THM-formation precursors during a storm event.

A Case Study on the Automatic Control of Chemical Dosing Processes for Full-Scale Drinking Water Treatment

2012 ◽  
Vol 209-211 ◽  
pp. 1981-1985 ◽  
Author(s):  
Dong Sheng Wang ◽  
Xing Peng Zhou ◽  
Xiao Ming Mo ◽  
Yi Wang
Keyword(s):  
Water Quality ◽  
Drinking Water ◽  
Water Treatment ◽  
Automatic Control ◽  
Water Flow ◽  
Treatment Plant ◽  
Drinking Water Treatment ◽  
Constant Attention ◽  
Operational Conditions ◽  
Quality Water

During drinking water treatment, the chemical dosing processes, such as coagulant dosing process, ozone dosing process and chlorine dosing process are usually manually operated based on the operator knowledge and experience. However, due to the variations of water quality, water flow and process operational conditions and characteristics of large time-delay and nonlinear for the chemical dosing processes, it is difficult to adjust the chemical dosages in time by operators to keep the treated water quality stable, especially during the periods of rapid and frequent variations of water quality, water flow and process operational conditions. Thus, the improvements of control methods for the chemical dosing processes are essential to the operation of drinking water treatment plants. The Xiangcheng Water Treatment Plant in Suzhou, China has been utilizing the automatic control for chemical dosing processes since February 2012. Automatic controllers are designed respectively for the coagulant dosing process, ozone dosing process and chlorine dosing process. After the implementation of automatic control, operators are not necessary to keep constant attention. In addition, due to the improvements of control accuracies for the chemical dosing processes, the chemical dosages are reduced on the premise of ensuring safe water. Thus, both of the human resource costs and material costs can be saved. The practical control results demonstrate the efficiencies of proposed methods.

Sign in / Sign up

Export Citation Format

Share Document