Heavy Metal Uptake by Lignin:  Comparison of Biotic Ligand Models with an Ion-Exchange Process

2002 ◽  
Vol 36 (7) ◽  
pp. 1485-1490 ◽  
Author(s):  
Ray H. Crist ◽  
J. Robert Martin ◽  
DeLanson R. Crist
Keyword(s):  
Heavy Metal ◽  
Ion Exchange ◽  
Metal Uptake ◽  
Exchange Process ◽  
Heavy Metal Uptake ◽  
Ion Exchange Process ◽  
Biotic Ligand

scholarly journals Competitive Heavy Metal Removal from Binary Solution

2020 ◽  
Vol 69 (9-10) ◽  
pp. 465-471
Author(s):  
Anita Bašić ◽  
Mario Nikola Mužek ◽  
Lea Kukoč-Modun ◽  
Sandra Svilović
Keyword(s):  
Heavy Metal ◽  
Ion Exchange ◽  
Metal Removal ◽  
Binary Solution ◽  
Exchange Process ◽  
Heavy Metal Removal ◽  
Cobalt Ions ◽  
Rushton Turbine ◽  
Ion Exchange Process ◽  
Ion Exchange Kinetics

The removal of copper and cobalt ions from binary metal solutions on zeolite NaX by ion exchange process was investigated. Experiments were conducted in unbaffled glass reactor with a Rushton turbine as a stirrer. The dependence of ion exchange kinetics and the amount exchanged were tested using different initial concentrations of metal ions in mixtures. The results obtained indicate that the removal efficiency depends on the initial heavy metal concentrations in binary solutions. Experimental kinetics data were analysed using Ritchie and Weber-Morris models. According to AARD values, the rate in this study was reaction-controlled.

Sustainable development of a surface-functionalized mesoporous aluminosilicate with ultra-high ion exchange efficiency

2016 ◽  
Vol 3 (4) ◽  
pp. 502-513 ◽  
Author(s):  
Pejman Hadi ◽  
Chao Ning ◽  
James D. Kubicki ◽  
Karl Mueller ◽  
Jonathan W. Fagan ◽  
...  
Keyword(s):  
Heavy Metal ◽  
Sustainable Development ◽  
Ion Exchange ◽  
Metal Uptake ◽  
Heavy Metal Uptake ◽  
Mesoporous Aluminosilicate

The present work employs a facile hydroxylation technique to efficiently functionalize the surface of a waste-derived aluminosilicate for ultra-high heavy metal uptakeviaion exchange.

scholarly journals METODA PENGHILANGAN LOGAM BERAT (As, Cd, Cr, Ag, Cu, Pb, Ni dan Zn) DI DALAM AIR LIMBAH INDUSTRI

2018 ◽  
Vol 6 (2) ◽  
Author(s):  
Nusa Idaman Said
Keyword(s):  
Water Pollution ◽  
Heavy Metals ◽  
Heavy Metal ◽  
Ion Exchange ◽  
Industrial Wastewater ◽  
Exchange Process ◽  
Toxic Substance ◽  
Chemical Oxidation ◽  
Alternative Methods ◽  
Ion Exchange Process

Industry is a potential source of water pollution, it produces pollutants that are extremely harmful to people and the environment. Many industrial facilities use freshwater to carry away waste from the plant and into rivers, lakes and oceans. Inorganic industrial wastes are more difficult to control and potentially more hazardous Industries discharge a variety of toxic compounds and heavy metals. The most pollutans heavy metals are Lead, Cadmium, Copper, Chromium, Selenium, Mercury, Nickel, Zinc, Arsen and Chromium. Heavy metals are dangerous because they tend to bioaccumulate. Mercury for example, causes damages to the brain and the central nervous system, causes psychological changes and makes development changes in young children. Normally Mercury is a toxic substance which has no known function in human biochemistry.There are several methods to eliminate or remove heavy metals in water such as chemical oxidation process, ion exchange process, adsorption process, an electrochemical process, reverse osmosis process and other alternative methods likes biosorption. Each method has strengths and weaknesses, therefore to choose the method of removing heavy metals in wastewater depending on pollutants conditions such as concentrations of heavy metals in wastewater, types of heavy metal, heavy metal concentrations in treated water, land availability, flow rate of wastewater will be processed and other parameters. In this paper discusses several methods of removal of heavy metals in industrial wastewater such as chemical precipitation and oxidation processes, adsorption and ion exchange process. Keywords : water pollution, heavy metal, industrial wastewater, removal methods

Enhanced heavy metal uptake by activated sludge cultures grown in the presence of biopolymer stimulators

1996 ◽  
Vol 34 (5-6) ◽  
pp. 267-272 ◽  
Author(s):  
Ken Fukushi ◽  
Duk Chang ◽  
Sam Ghosh
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Activated Sludge ◽  
G Protein ◽  
Metal Uptake ◽  
Heavy Metal Uptake ◽  
Culture Viability ◽  
Grown Culture

The objective of this research was to investigate the feasibility of developing improved activated sludge cultures capable of removing heavy metals. Cystine, peptone, and β-glycerophosphate (BGP) stimulated metal uptake without the significant reduction of culture viability otherwise experienced in the absence of these chemicals. The cystine-peptone-BGP-grown culture exhibited the highest removal of copper and cadmium of 5.67 and 2.53 mM/g protein, respectively.

Removal of Toxic Dyestuffs from Aqueous Solution by Amphoteric Bioadsorbent

2020 ◽  
Vol 16 ◽  
Author(s):  
Reda M. El-Shishtawy ◽  
Abdullah M. Asiri ◽  
Nahed S. E. Ahmed
Keyword(s):  
Aqueous Solution ◽  
Ion Exchange ◽  
Dye Removal ◽  
Exchange Process ◽  
Cationic Dyes ◽  
Carboxyl Groups ◽  
Maximum Adsorption Capacity ◽  
Equilibrium Isotherm ◽  
Ion Exchange Process ◽  
Dyes And Pigments

Background: Color effluents generated from the production industry of dyes and pigments and their use in different applications such as textile, paper, leather tanning, and food industries, are high in color and contaminants that damage the aquatic life. It is estimated that about 105 of various commercial dyes and pigments amounted to 7×105 tons are produced annually worldwide. Ultimately, about 10–15% is wasted into the effluents of the textile industry. Chitin is abundant in nature, and it is a linear biopolymer containing acetamido and hydroxyl groups amenable to render it atmospheric by introducing amino and carboxyl groups, hence able to remove different classes of toxic organic dyes from colored effluents. Methods: Chitin was chemically modified to render it amphoteric via the introduction of carboxyl and amino groups. The amphoteric chitin has been fully characterized by FTIR, TGA-DTG, elemental analysis, SEM, and point of zero charge. Adsorption optimization for both anionic and cationic dyes was made by batch adsorption method, and the conditions obtained were used for studying the kinetics and thermodynamics of adsorption. Results: The results of dye removal proved that the adsorbent was proven effective in removing both anionic and cationic dyes (Acid Red 1 and methylene blue (MB)), at their respective optimum pHs (2 for acid and 8 for cationic dye). The equilibrium isotherm at room temperature fitted the Freundlich model for MB, and the maximum adsorption capacity was 98.2 mg/g using 50 mg/l of MB, whereas the equilibrium isotherm fitted the Freundlich and Langmuir model for AR1 and the maximum adsorption capacity was 128.2 mg/g. Kinetic results indicate that the adsorption is a two-step diffusion process for both dyes as indicated by the values of the initial adsorption factor (Ri) and follows the pseudo-second-order kinetics. Also, thermodynamic calculations suggest that the adsorption of AR1 on the amphoteric chitin is an endothermic process from 294 to 303 K. The result indicated that the mechanism of adsorption is chemisorption via an ion-exchange process. Also, recycling of the adsorbent was easy, and its reuse for dye removal was effective. Conclusion: New amphoteric chitin has been successfully synthesized and characterized. This resin material, which contains amino and carboxyl groups, is novel as such chemical modification of chitin hasn’t been reported. The amphoteric chitin has proven effective in decolorizing aqueous solution from anionic and cationic dyes. The adsorption behavior of amphoteric chitin is believed to follow chemical adsorption with an ion-exchange process. The recycling process for few cycles indicated that the loaded adsorbent could be regenerated by simple treatment and retested for removing anionic and cationic dyes without any loss in the adsorbability. Therefore, the study introduces a new and easy approach for the development of amphoteric adsorbent for application in the removal of different dyes from aqueous solutions.

Chromate ion-exchange process at alkaline pH

1986 ◽  
Vol 20 (9) ◽  
pp. 1177-1184 ◽  
Author(s):  
Arup K. Sengupta ◽  
Dennis Clifford ◽  
Suresh Subramonian
Keyword(s):  
Ion Exchange ◽  
Exchange Process ◽  
Alkaline Ph ◽  
Ion Exchange Process ◽  
Chromate Ion
Sign in / Sign up

Export Citation Format

Share Document