Combined Neutron and Synchrotron X-ray Diffraction Investigation of the BaCe0.85-xZrxY0.15O3-δ(0.1 ≤x≤ 0.4) Proton Conductors

2011 ◽  
Vol 23 (5) ◽  
pp. 1323-1330 ◽  
Author(s):  
Lorenzo Malavasi ◽  
Cristina Tealdi ◽  
Clemens Ritter ◽  
Vladimir Pomjakushin ◽  
Fabia Gozzo ◽  
...  
Keyword(s):  
Proton Conductors ◽  
X Ray Diffraction ◽  
X Ray

Synthesis and Characterization of High Density and Low Temperature Sintered Proton Conductor BaCe0.5Zr0.35In0.1Zn0.05O3-δ

2015 ◽  
Vol 1098 ◽  
pp. 104-109 ◽  
Author(s):  
Abul Kalam Azad ◽  
D.D.Y. Setsoafia ◽  
L.C. Ming ◽  
Iskandar Petra
Keyword(s):  
Particle Size ◽  
Average Particle Size ◽  
Proton Conductor ◽  
Solid State Reaction Method ◽  
Proton Conductors ◽  
Orthorhombic Symmetry ◽  
Average Particle ◽  
X Ray Diffraction ◽  
X Ray ◽  
Proton Uptake

Rare-earth-doped BaCeO3and BaZrO3electrolytes with perovskite structure have been studied extensively in developing proton conducting intermediate temperature SOFC. Acceptor doped alkaline earth cerates and zirconates have been thoroughly studied because of the great interest in their possible applications as solid proton conductors. The perovskite type proton conductor BaCe0.5Zr0.35In0.1Zn0.05O3-δwas prepared in the traditional solid state reaction method. The density of the sample obtained about 96% of the theoretical density after sintering at 1350 °C and X-ray diffraction study confirms the pure phase. Rietveld refinement of the neutron and X-ray powder diffraction data shows that this material crystallizes in the orthorhombic symmetry in the space group Pm3m. Particle size measurement shows that the average particle size is about 2.4 μm. The average thermal expansion at 894 °C was 9.49 x 10-6/°C. Thermogravimetric analysis (TGA) traces obtained for the sample on heating in wet air shows that the maximum proton uptake occurs from 595 °C.

The Use of Advanced Analytical Techniques for Characterization of the Chemical, Physical, and Crystallographic Nature of a Surface

1973 ◽  
Vol 31 ◽  
pp. 132-133 ◽  
Author(s):  
R. E. Herfert
Keyword(s):  
Surface Characterization ◽  
Analytical Techniques ◽  
X Ray Diffraction ◽  
Depth Of Penetration ◽  
X Ray ◽  
The Past ◽  
Transmission Electron ◽  
Scanning Electron

Studies of the nature of a surface, either metallic or nonmetallic, in the past, have been limited to the instrumentation available for these measurements. In the past, optical microscopy, replica transmission electron microscopy, electron or X-ray diffraction and optical or X-ray spectroscopy have provided the means of surface characterization. Actually, some of these techniques are not purely surface; the depth of penetration may be a few thousands of an inch. Within the last five years, instrumentation has been made available which now makes it practical for use to study the outer few 100A of layers and characterize it completely from a chemical, physical, and crystallographic standpoint. The scanning electron microscope (SEM) provides a means of viewing the surface of a material in situ to magnifications as high as 250,000X.

Ribosome Structural Organization

1974 ◽  
Vol 32 ◽  
pp. 332-333
Author(s):  
James A. Lake
Keyword(s):  
Ribosomal Proteins ◽  
Structural Organization ◽  
Three Dimensional ◽  
Small Subunit ◽  
Structural Studies ◽  
X Ray Diffraction ◽  
Specific Antibodies ◽  
X Ray ◽  
E Coli ◽  
Complete Sequences

The understanding of ribosome structure has advanced considerably in the last several years. Biochemists have characterized the constituent proteins and rRNA's of ribosomes. Complete sequences have been determined for some ribosomal proteins and specific antibodies have been prepared against all E. coli small subunit proteins. In addition, a number of naturally occuring systems of three dimensional ribosome crystals which are suitable for structural studies have been observed in eukaryotes. Although the crystals are, in general, too small for X-ray diffraction, their size is ideal for electron microscopy.

Electron Microscopy of Human Gallstones

1971 ◽  
Vol 29 ◽  
pp. 296-297
Author(s):  
C. Wolpers ◽  
R. Blaschke
Keyword(s):  
Electron Microscopy ◽  
Room Temperature ◽  
Bile Pigment ◽  
X Ray Diffraction ◽  
Triclinic Crystal System ◽  
X Ray ◽  
Follow Up Study ◽  
Infra Red ◽  
Main Components

Scanning microscopy was used to study the surface of human gallstones and the surface of fractures. The specimens were obtained by operation, washed with water, dried at room temperature and shadowcasted with carbon and aluminum. Most of the specimens belong to patients from a series of X-ray follow-up study, examined during the last twenty years. So it was possible to evaluate approximately the age of these gallstones and to get information on the intensity of growing and solving.Cholesterol, a group of bile pigment substances and different salts of calcium, are the main components of human gallstones. By X-ray diffraction technique, infra-red spectroscopy and by chemical analysis it was demonstrated that all three components can be found in any gallstone. In the presence of water cholesterol crystallizes in pane-like plates of the triclinic crystal system.

High Resolution Replication of Organoclay Surfaces

1982 ◽  
Vol 40 ◽  
pp. 576-577
Author(s):  
W. W. Barker ◽  
W. E. Rigsby ◽  
V. J. Hurst ◽  
W. J. Humphreys
Keyword(s):  
Clay Mineral ◽  
Organic Molecule ◽  
Organic Molecules ◽  
X Ray Diffraction ◽  
Xrd Pattern ◽  
X Ray ◽  
Naturally Occurring ◽  
Silicate Layers ◽  
Mineral Identification

Experimental clay mineral-organic molecule complexes long have been known and some of them have been extensively studied by X-ray diffraction methods. The organic molecules are adsorbed onto the surfaces of the clay minerals, or intercalated between the silicate layers. Natural organo-clays also are widely recognized but generally have not been well characterized. Widely used techniques for clay mineral identification involve treatment of the sample with H2 O2 or other oxidant to destroy any associated organics. This generally simplifies and intensifies the XRD pattern of the clay residue, but helps little with the characterization of the original organoclay. Adequate techniques for the direct observation of synthetic and naturally occurring organoclays are yet to be developed.

Electron Microscopy of Shock Loaded Polycrystalline Beryllium

1974 ◽  
Vol 32 ◽  
pp. 506-507 ◽  
Author(s):  
J. M. Galbraith ◽  
L. E. Murr ◽  
A. L. Stevens
Keyword(s):  
Electron Microscopy ◽  
Wave Propagation ◽  
Structural Change ◽  
Single Crystal ◽  
Diffraction Pattern ◽  
Shock Loading ◽  
Slip Systems ◽  
Compression Tests ◽  
X Ray Diffraction ◽  
X Ray

Uniaxial compression tests and hydrostatic tests at pressures up to 27 kbars have been performed to determine operating slip systems in single crystal and polycrystal1ine beryllium. A recent study has been made of wave propagation in single crystal beryllium by shock loading to selectively activate various slip systems, and this has been followed by a study of wave propagation and spallation in textured, polycrystal1ine beryllium. An alteration in the X-ray diffraction pattern has been noted after shock loading, but this alteration has not yet been correlated with any structural change occurring during shock loading of polycrystal1ine beryllium.This study is being conducted in an effort to characterize the effects of shock loading on textured, polycrystal1ine beryllium. Samples were fabricated from a billet of Kawecki-Berylco hot pressed HP-10 beryllium.

Chemical modification of the bacterial wall to determine sites of metal deposition

1978 ◽  
Vol 36 (2) ◽  
pp. 350-351
Author(s):  
T. J. Beveridge
Keyword(s):  
Electron Scattering ◽  
Metal Salt ◽  
Metal Deposition ◽  
Suitable Model ◽  
X Ray Diffraction ◽  
Subtilis Cell ◽  
Thin Sections ◽  
X Ray ◽  
Section Data ◽  
Metal Impregnation

The Bacillus subtilis cell wall provides a protective sacculus about the vital constituents of the bacterium and consists of a collection of anionic hetero- and homopolymers which are mainly polysaccharidic. We recently demonstrated that unfixed walls were able to trap and retain substantial amounts of metal when suspended in aqueous metal salt solutions. These walls were briefly mixed with low concentration metal solutions (5mM for 10 min at 22°C), were well washed with deionized distilled water, and the quantity of metal uptake (atomic absorption and X-ray fluorescence), the type of staining response (electron scattering profile of thin-sections), and the crystallinity of the deposition product (X-ray diffraction of embedded specimens) determined.Since most biological material possesses little electron scattering ability electron microscopists have been forced to depend on heavy metal impregnation of the specimen before obtaining thin-section data. Our experience with these walls suggested that they may provide a suitable model system with which to study the sites of reaction for this metal deposition.

Polygonal profiles of ferritin molecules

1983 ◽  
Vol 41 ◽  
pp. 600-601
Author(s):  
William H. Massover
Keyword(s):  
Axial Ratio ◽  
X Ray Diffraction ◽  
Rhombic Dodecahedron ◽  
Apparent Contradiction ◽  
Iron Storage ◽  
X Ray ◽  
Hexagonal Shape ◽  
Axes Of Symmetry ◽  
Apparent Conflict ◽  
Iron Storage Protein

The molecular structure of the iron-storage protein, ferritin, is becoming known in ever finer detail. The 24 apoferritin subunits (MW ca. 20,000) have a 2:1 axial ratio and are polymerized with 4:3:2 symmetry to form an outer shell surrounding a variable amount of microcrystalline iron, Recent x-ray diffraction results indicate that the projected outline of the native molecule has a quasi-hexagonal shape when viewed down the 3-fold axes of symmetry, and a quasi-square shape when looking down the 4-fold axes. To date, no electron microscope study has reported observing anything other than circular profiles, which would indicate that ferritin is strictly spherical. The apparent conflict between the "hollow sphere" of electron microscopy (E.M.) and the "truncated rhombic dodecahedron" of x-ray diffraction could reflect the poorer effective resolution of E.M. coming from radiation damage, staining, drying, etc. The present study investigates the detailed shape of individual ferritin molecules in order to search for the predicted aspherical profiles and to interpret the nature of this apparent contradiction.

Cytomembrane Preservation in Tissue Dehydrated Only With Glutaraldehyde and Epon 812 Resin

1973 ◽  
Vol 31 ◽  
pp. 320-321
Author(s):  
Daniel C. Pease
Keyword(s):  
Diffraction Pattern ◽  
X Ray Diffraction ◽  
High Concentration ◽  
Unpublished Study ◽  
X Ray ◽  
Sectioned Material

A previous study demonstrated that tissue could be successfully infiltrated with 50% glutaraldehyde, and then subsequently polymerized with urea to create an embedment which retained cytomembrane lipids in sectioned material. As a result, the 180-190 Å periodicity characteristic of fresh, mammalian myelin was preserved in sections, as was a brilliant birefringence, and the capacity to bind OsO4 vapor in the hydrophobic bilayers. An associated (unpublished) study, carried out in co-operation with Drs. C.K. Akers and D.F. Parsons, demonstrated that the high concentration of glutaraldehyde (and urea) did not significantly alter the X-ray diffraction pattern of aldehyde-fixed, myelin. Thus, by itself, 50% glutaraldehyde has little effect upon cytomembrane systems and can be used with confidence for the first stages of dehydration.

Bimolecular and Monomolecular Lipid Films: Selected Area Electron Diffraction

1969 ◽  
Vol 27 ◽  
pp. 338-339
Author(s):  
Robert M. Glaeser ◽  
David W. Deamer
Keyword(s):  
Electron Diffraction ◽  
Membrane Structure ◽  
Molecular Organization ◽  
Membrane Material ◽  
X Ray Diffraction ◽  
Membrane Systems ◽  
X Ray ◽  
Selected Area Electron Diffraction ◽  
Lipid Films ◽  
Ultimate Objective

In the investigation of the molecular organization of cell membranes it is often supposed that lipid molecules are arranged in a bimolecular film. X-ray diffraction data obtained in a direction perpendicular to the plane of suitably layered membrane systems have generally been interpreted in accord with such a model of the membrane structure. The present studies were begun in order to determine whether selected area electron diffraction would provide a tool of sufficient sensitivity to permit investigation of the degree of intermolecular order within lipid films. The ultimate objective would then be to apply the method to single fragments of cell membrane material in order to obtain data complementary to the transverse data obtainable by x-ray diffraction.

Sign in / Sign up

Export Citation Format

Share Document