In Situ Ultrasonic Attenuation Spectroscopic Study of the Dynamic Evolution of Particle Size during Solution-Phase Crystallization of Urea

2003 ◽  
Vol 3 (1) ◽  
pp. 67-72 ◽  
Author(s):  
Patricia Mougin ◽  
Derek Wilkinson ◽  
Kevin J. Roberts
Keyword(s):  
Particle Size ◽  
Spectroscopic Study ◽  
Ultrasonic Attenuation ◽  
Solution Phase ◽  
Dynamic Evolution

Novel Formulation Development and Evaluation of Nanoparticles Based in Situ Gelling System for The Ophthalmic Delivery of Ciprofloxacin Hydrochloride

2015 ◽  
Vol 5 (4) ◽  
Author(s):  
Kranti Singh ◽  
Surajpal Verma ◽  
Shyam Prasad ◽  
Indu Bala
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
Drug Loading ◽  
In Vitro Release ◽  
Formulation Development ◽  
Ciprofloxacin Hydrochloride ◽  
Potential Value ◽  
The Mean ◽  
In Situ Gelling

Ciprofloxacin hydrochloride loaded Eudragit RS100 nanoparticles were prepared by using w/o/w emulsification (multiple emulsification) solvent evaporation followed by drying of nanoparticles at 50°C. The nanoparticles were further incorporated into the pH-triggered in situ gel forming system which was prepared using Carbopol 940 in combination with HPMC as viscosifying agent. The developed nanoparticles was evaluated for particle size, zeta potential value and loading efficiency; nanoparticle incorporated in situ gelling system was evaluated for pH, clarity, gelling strength, rheological studies, in-vitro release studies and ex-vivo precorneal permeation studies. The nanopaticle showed the mean particle size varying between 263.5nm - 325.9 nm with the mean zeta potential value of -5.91 mV to -8.13 mV and drug loading capacity varied individually between 72.50% to 98.70% w/w. The formulation was clear with no suspended particles, showed good gelling properties. The gelling was quick and remained for longer time period. The developed formulation was therapeutically efficacious, stable and non-irritant. It provided the sustained release of drug over a period of 8-10 hours.

Effect of particle size on in-situ desulfurization for oxy-fuel CFBC

Fuel ◽  
2021 ◽  
Vol 291 ◽  
pp. 120270
Author(s):  
Seo Yeong Kang ◽  
Su Been Seo ◽  
Eun Sol Go ◽  
Hyung Woo Kim ◽  
Sang In Keel ◽  
...  
Keyword(s):  
Particle Size ◽  
Effect Of Particle Size

scholarly journals Effects of processing, moisture, and storage length on the fermentation profile, particle size, and ruminal disappearance of reconstituted corn grain

2020 ◽  
Vol 98 (11) ◽  
Author(s):  
Ana L M Gomes ◽  
Antonio V I Bueno ◽  
Fernando A Jacovaci ◽  
Guilherme Donadel ◽  
Luiz F Ferraretto ◽  
...  
Keyword(s):  
Particle Size ◽  
Lactic Acid ◽  
Butyric Acid ◽  
Hammer Mill ◽  
Moisture Concentration ◽  
Fermentation Profile ◽  
And Storage ◽  
Ground Corn ◽  
Corn Grain

Abstract Our objective was to examine the effects of processing, moisture, and anaerobic storage length of reconstituted corn grain (RCG) on the fermentation profile, geometric mean particle size (GMPS), and ruminal dry matter disappearance (DMD). Dry corn kernels were ground (hammer mill, 5-mm screen) or rolled, then rehydrated to 30%, 35%, or 40% moisture, and stored for 0, 14, 30, 60, 90, 120, or 180 d in laboratory silos. Rolled corn had an increased GMPS compared with ground corn (2.24 and 1.13 mm, respectively, at ensiling). However, there was a trend for an interaction between processing and moisture concentration to affect particle size, with GMPS increasing with increased moisture concentration, especially in ground corn. Longer storage periods also slightly increased GMPS. Processing, moisture, and storage length interacted to affect the fermentation pattern (two- or three-way interactions). Overall, pH decreased, whereas lactic acid, acetic acid, ethanol, and NH3-N increased with storage length. RCG with 30% moisture had less lactic acid than corn with 35% and 40% moisture, indicating that fermentation might have been curtailed and also due to the clostridial fermentation that converts lactic acid to butyric acid. Ensiling reconstituted ground corn with 30% of moisture led to greater concentrations of ethanol and butyric acid, resulting in greater DM loss than grain rehydrated to 35% or 40% of moisture. Ammonia-N and in situ ruminal DMD were highest for reconstituted ground corn with 35% or 40% of moisture, mainly after 60 d of storage. Therefore, longer storage periods and greater moisture contents did not offset the negative effect of greater particle size on the in situ ruminal DMD of rolled RCG. Nonetheless, RCG should be ensiled with more than 30% moisture and stored for at least 2 mo to improve the ruminal DMD and reduce the formation of ethanol and butyric acid.

scholarly journals In Situ Synthesis of Core-Shell-Structured SiCp Reinforcements in Aluminium Matrix Composites by Powder Metallurgy

Metals ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 1201
Author(s):  
Xinghua Ji ◽  
Cheng Zhang ◽  
Shufeng Li
Keyword(s):  
Particle Size ◽  
Powder Metallurgy ◽  
Shell Structure ◽  
Ex Situ ◽  
Aluminium Matrix ◽  
Core Shell ◽  
Matrix Composites ◽  
Aluminium Matrix Composites ◽  
Core Shell Structure

SiCp reinforced aluminium matrix composites (AMCs), which are widely used in the aerospace, automotive, and electronic packaging fields along with others, are usually prepared by ex situ techniques. However, interfacial contamination and poor wettability of the ex situ techniques make further improvement in their comprehensive performance difficult. In this paper, SiCp reinforced AMCs with theoretical volume fractions of 15, 20, and 30% are prepared by powder metallurgy and in situ reaction via an Al-Si-C system. Moreover, a combined method of external addition and an in situ method is used to investigate the synergistic effect of ex situ and in situ SiCp on AMCs. SiC particles can be formed by an indirect reaction: 4Al + 3C → Al4C3 and Al4C3 + 3Si → 3SiC + 4Al. This reaction is mainly through the diffusion of Si, in which Si diffuses around Al4C3 and then reacts with Al4C3 to form SiCp. The in situ SiC particles have a smooth boundary, and the particle size is approximately 1–3 μm. A core-shell structure having good bonding with an aluminium matrix was generated, which consists of an ex situ SiC core and an in situ SiC shell with a thickness of 1–5 μm. The yield strength and ultimate tensile strength of in situ SiCp reinforced AMCs can be significantly increased with a constant ductility by adding 5% ex situ SiCp for Al-28Si-7C. The graphite particle size has a significant effect on the properties of the alloy. A criterion to determine whether Al4C3 is a complete reaction is achieved, and the forming mechanism of the core-shell structure is analysed.

Super-elastic ferroelectric single-crystal membrane with continuous electric dipole rotation

Science ◽  
2019 ◽  
Vol 366 (6464) ◽  
pp. 475-479 ◽  
Author(s):  
Guohua Dong ◽  
Suzhi Li ◽  
Mouteng Yao ◽  
Ziyao Zhou ◽  
Yong-Qiang Zhang ◽  
...  
Keyword(s):  
Energy Landscape ◽  
Domain Engineering ◽  
Bending Test ◽  
Dynamic Evolution ◽  
Brittle Deformation ◽  
Continuous Transition ◽  
Flexible Sensors ◽  
Mismatch Stress ◽  
Ferroelectric Single Crystal

Ferroelectrics are usually inflexible oxides that undergo brittle deformation. We synthesized freestanding single-crystalline ferroelectric barium titanate (BaTiO3) membranes with a damage-free lifting-off process. Our BaTiO3 membranes can undergo a ~180° folding during an in situ bending test, demonstrating a super-elasticity and ultraflexibility. We found that the origin of the super-elasticity was from the dynamic evolution of ferroelectric nanodomains. High stresses modulate the energy landscape markedly and allow the dipoles to rotate continuously between the a and c nanodomains. A continuous transition zone is formed to accommodate the variant strain and avoid high mismatch stress that usually causes fracture. The phenomenon should be possible in other ferroelectrics systems through domain engineering. The ultraflexible epitaxial ferroelectric membranes could enable many applications such as flexible sensors, memories, and electronic skins.

Sign in / Sign up

Export Citation Format

Share Document