Structure−Property Relationships of Copolymers Obtained by Ring-Opening Polymerization of Glycolide and ε-Caprolactone. Part 1. Synthesis and Characterization

2005 ◽  
Vol 6 (1) ◽  
pp. 483-488 ◽  
Author(s):  
Piotr Dobrzynski ◽  
Suming Li ◽  
Janusz Kasperczyk ◽  
Maciej Bero ◽  
Francis Gasc ◽  
...  
Keyword(s):  
Ring Opening ◽  
Ring Opening Polymerization ◽  
Synthesis And Characterization ◽  
Structure Property ◽  
Structure Property Relationships

Synthesis and properties of polyimides from 1,4-bis(4-amino-2-phenylphenoxy) benzene and 4,4′-bis(4-amino-2-phenylphenoxy) biphenyl

2012 ◽  
Vol 24 (8) ◽  
pp. 783-792 ◽  
Author(s):  
Atsushi Morikawa ◽  
Fumi Miyata ◽  
Jun Nishimura
Keyword(s):  
Ring Opening ◽  
Mechanical Analysis ◽  
Ring Opening Polymerization ◽  
Dielectric Constants ◽  
Structure Property ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Structure Property Relationships ◽  
Step Procedure

Diamines, namely, 1,4-bis(4-amino-2-phenylphenoxy) benzene (1) and 4,4′-bis(4-amino-2-phenylphenoxy) biphenyl (2), were synthesized from 4-fluoro-3-phenyl nitrobenzene. Two series of polyimides were synthesized from these diamines with nine types of dianhydrides by a conventional two-step procedure that included ring-opening polymerization in N-methyl-2-pyrrolidone and subsequent thermal cyclic dehydration. The polyimides were characterized by x-ray diffraction, differential scanning calorimetry, thermogravimetry and dynamic mechanical analysis. The polyimides from 1 and 2 had a glass transition temperature in the range of 221–254°C and 222–271°C, respectively, and all the polymers were amorphous. The structure–property relationships of these polyimides were examined and compared with those of the previously prepared analogous polyimides from the bis(4-amino-2-biphenyl)ether (3). Water absorption and dielectric constants ( ∊) of the polyimides were compared and discussed on the basis of imide content per repeating unit.

scholarly journals Expanding Monomers as Anti-Shrinkage Additives

Polymers ◽  
2021 ◽  
Vol 13 (5) ◽  
pp. 806
Author(s):  
Philipp Marx ◽  
Frank Wiesbrock
Keyword(s):  
Ring Opening ◽  
Covalent Bond ◽  
Volumetric Shrinkage ◽  
Structure Property ◽  
Atomic Packing ◽  
Materials Properties ◽  
Volumetric Expansion ◽  
Structure Property Relationships ◽  
Ring Opening Reaction ◽  
Measuring Techniques

Commonly, volumetric shrinkage occurs during polymerizations due to the shortening of the equilibrium Van der Waals distance of two molecules to the length of a (significantly shorter) covalent bond. This volumetric shrinkage can have severe influence on the materials’ properties. One strategy to overcome this volumetric shrinkage is the use of expanding monomers that show volumetric expansion during polymerization reactions. Such monomers exhibit cyclic or even oligocyclic structural motifs with a correspondingly dense atomic packing. During the ring-opening reaction of such monomers, linear structures with atomic packing of lower density are formed, which results in volumetric expansion or at least reduced volumetric shrinkage. This review provides a concise overview of expanding monomers with a focus on the elucidation of structure-property relationships. Preceded by a brief introduction of measuring techniques for the quantification of volumetric changes, the most prominent classes of expanding monomers will be presented and discussed, namely cycloalkanes and cycloalkenes, oxacycles, benzoxazines, as well as thiocyclic compounds. Spiroorthoesters, spiroorthocarbonates, cyclic carbonates, and benzoxazines are particularly highlighted.

scholarly journals Synthesis and Characterization of Polyphosphazenes Modified with Hydroxyethyl Methacrylate and Lactic Acid

2013 ◽  
Vol 2013 ◽  
pp. 1-7 ◽  
Author(s):  
Evelyn Carolina Martínez Ceballos ◽  
Ricardo Vera Graziano ◽  
Gonzalo Martínez Barrera ◽  
Oscar Olea Mejía
Keyword(s):  
Lactic Acid ◽  
Ring Opening ◽  
Room Temperature ◽  
Block Structure ◽  
Ring Opening Polymerization ◽  
Synthesis And Characterization ◽  
Poly Lactic Acid ◽  
Hydroxyethyl Methacrylate ◽  
H Nmr

Poly(dichlorophosphazene) was prepared by melt ring-opening polymerization of the hexachlorocyclotriphosphazene. Poly[bis(2-hydroxyethyl-methacrylate)-phosphazene] and poly[(2-hydroxyethyl-methacrylate)-graft-poly(lactic-acid)-phosphazene] were obtained by nucleophilic condensation reactions at different concentrations of the substituents. The properties of the synthesized copolymers were assessed by FTIR,1H-NMR and31P-NMR, thermal analysis (DSC-TGA), and electron microscopy (SEM). The copolymers have a block structure and show twoTg's below room temperature. They are stable up to a temperature of 100°C. The type of the substituents attached to the PZ backbone determines the morphology of the polymers.

Synthesis and Characterization of Polydimethylsiloxane (PDMS) with Medium Viscosity via Ring-Opening Polymerization

2021 ◽  
Vol 1028 ◽  
pp. 346-351
Author(s):  
Soni Setiadji ◽  
Zulfi Mofa Agasa ◽  
Diba G Auliya ◽  
Fitrilawati ◽  
Norman Syakir ◽  
...  
Keyword(s):  
Ring Opening ◽  
Vitreoretinal Surgery ◽  
High Viscosity ◽  
Ring Opening Polymerization ◽  
Vitreous Humour ◽  
Synthesis And Characterization ◽  
Low Viscosity ◽  
A Value ◽  
Medium Viscosity

Duration of use and injectability are external factors for Polydimethylsiloxane (PDMS) that needs to be considered when PDMS utilized as a vitreous substituted liquid in vitreoretinal surgery. In general, PDMS which has been used as a substitute for vitreous humour is PDMS with a low viscosity in the value about 1000 cSt and a high viscosity at a value of about 5000 cSt. Various deficiencies have been encountered from low and high viscosity of PDMS, causing research to be continued to obtain PDMS which has suitable properties as a substitute for vitreous humour. One of them is research to obtain medium viscosity of PDMS with a viscosity value of about 2000 cSt. Here, we reported synthesis and characterization of PDMS with medium viscosity in ranges from 1800 to 2600 mPas. PDMS was synthesized through Ring-Opening Polymerization (ROP) pathway using the monomer of Octamethylcyclotetrasiloxane (D4) and the chain terminator of Hexamethyldisiloxane (MM). Various concentrations of potassium hydroxide (KOH) of 3, 4, 6 and 8 %(w/v) were applied as initiator to form gel of PDMS. All synthesized PDMS samples were identified to have viscosity values of 1800-2600 mPas, refractive index values of 1.4042-1.4044 and surface tension values of 22-23 mN/m. Meanwhile, the results of Fourier-Transform Infrared (FTIR) measurement showed that the absorption peaks were similar to that of our previous report.

scholarly journals Correction: Synthesis and characterization of novel Li-stuffed garnet-like Li5+2xLa3Ta2−xGdxO12 (0 ≤ x ≤ 0.55): structure–property relationships

2017 ◽  
Vol 46 (25) ◽  
pp. 8304-8305
Author(s):  
Dalia M. Abdel Basset ◽  
Suresh Mulmi ◽  
Mohammed S. El-Bana ◽  
Suzan S. Fouad ◽  
Venkataraman Thangadurai
Keyword(s):  
Synthesis And Characterization ◽  
Structure Property ◽  
Dalton Trans ◽  
Structure Property Relationships

Correction for ‘Synthesis and characterization of novel Li-stuffed garnet-like Li5+2xLa3Ta2−xGdxO12 (0 ≤ x ≤ 0.55): structure–property relationships’ by Dalia M. Abdel Basset, et al., Dalton Trans., 2017, 46, 933–946.

Sign in / Sign up

Export Citation Format

Share Document