Model Cellulose I Surfaces: A Review

2009 ◽  
pp. 75-93 ◽  
Author(s):  
Emily D. Cranston ◽  
Derek G. Gray
Keyword(s):  
Cellulose I

scholarly journals Pupation Substrate Type and Volume Affect Pupation, Quality Parameters and Production Costs of a Reproductive Colony of Ceratitis capitata (Diptera: Tephritidae) VIENNA 8 Genetic Sexing Strain

Insects ◽  
2021 ◽  
Vol 12 (4) ◽  
pp. 337
Author(s):  
Carlos Pascacio-Villafán ◽  
Luis Quintero-Fong ◽  
Larissa Guillén ◽  
José Pedro Rivera-Ciprian ◽  
Reynaldo Aguilar ◽  
...  
Keyword(s):  
Wheat Bran ◽  
Ceratitis Capitata ◽  
Mass Rearing ◽  
Physicochemical Characteristics ◽  
Production Costs ◽  
Cellulose I ◽  
Coconut Fiber ◽  
Genetic Sexing ◽  
Recycled Paper ◽  
Genetic Sexing Strain

Adequate pupation substrates and substrate volume are critical factors in the mass-rearing of insects for Sterile Insect Technique (SIT) applications. To identify an ideal pupation substrate for a reproductive colony of Ceratitis capitata (Wiedemann) VIENNA 8 genetic sexing strain, we first examined pupation in cellulose from recycled paper (cellulose I), sawdust, fine wheat bran, vermiculite and coconut fiber using a volume of 2.5–12.5 mL of substrate for each 5 mL volume of fly larvae. We found a positive relationship between substrate volume and pupation, with cellulose I generating the highest proportions of pupation and coconut fiber the lowest. Higher proportions of female flies (white pupae) pupated in sawdust. The proportion of female fliers increased as substrate volume rose in sawdust and coconut fiber, whereas it decreased in vermiculite and cellulose. In a second experiment, we tested three types of cellulose differing in physicochemical characteristics (celluloses I, II and III), sawdust, and fine wheat bran using a substrate:larvae ratio of 1:1. The three types of cellulose produced the highest pupation levels. The highest proportions of female fliers were observed in sawdust, and cellulose types III and II. Cellulose III and sawdust at relatively low volumes were more cost-effective to produce one million pupae than other substrates, including fine wheat bran used in a mass-rearing facility in Mexico.

ZIRCONIUM LOADED BANANA STEM FIBERS AS ADSORBENT FOR RECOVERY OF HG(II)

2016 ◽  
Vol 78 (8-3) ◽  
Author(s):  
Nurrulhidayah Salamun ◽  
Sugeng Triwahyono ◽  
Aishah Abdul Jalil
Keyword(s):  
Heavy Metals ◽  
Aquatic Environment ◽  
Active Sites ◽  
Low Cost ◽  
Mercury Removal ◽  
Cellulose I ◽  
Xrd Pattern ◽  
Crystal Phases ◽  
Good Possibility ◽  
Banana Stem

Mercury is one of the most toxic pollutants which pose a great threat to both human health and organism security. A great deal of research over recent decades has been motivated by the requirement to lower the concentration of these heavy metals in water and the need to develop low cost techniques which can be widely applied for heavy metals remediation. Adsorption is by far the most reliable technologies for removing mercury from water. In this study, banana stem fibers, a natural biomass was loaded with zirconium (IV) to investigate its feasibility for mercury removal from an aquatic environment. The XRD pattern for both BSF-HCl and Zr/BSF-HCl exhibited mainly the cellulose I structure which consists of two distinct crystal phases. The FESEM images illustrated the presence of relatively well organized, pronounced and uniform cavities distributed around the surface, indicated a good possibility for the metal ions to be adsorbed. The result shows that Hg (II) adsorption capacity increased from 45 to 72 mg/g after the immobilization of Zr due to increase in the active sites on the adsorbent. 

Über einen neuen Abbau der Cellulose (I. Mitteil.)

1928 ◽  
Vol 61 (8) ◽  
pp. 2019-2025 ◽  
Author(s):  
Hans Pringsheim ◽  
Erich Kasten ◽  
Eugen Schapiro
Keyword(s):  
Cellulose I

scholarly journals Stable, metastable and unstable cellulose solutions

2017 ◽  
Vol 4 (8) ◽  
pp. 170487 ◽  
Author(s):  
Marta Gubitosi ◽  
Pegah Nosrati ◽  
Mona Koder Hamid ◽  
Stefan Kuczera ◽  
Manja A. Behrens ◽  
...  
Keyword(s):  
Microcrystalline Cellulose ◽  
Small Angle ◽  
Supersaturated Solution ◽  
Cellulose Ii ◽  
Cellulose I ◽  
Tetrabutylammonium Hydroxide ◽  
X Ray ◽  
Stable Regime ◽  
X Ray Scattering ◽  
A Minor

We have characterized the dissolution state of microcrystalline cellulose (MCC) in aqueous tetrabutylammonium hydroxide, TBAH(aq), at different concentrations of TBAH, by means of turbidity and small-angle X-ray scattering. The solubility of cellulose increases with increasing TBAH concentration, which is consistent with solubilization driven by neutralization. When comparing the two polymorphs, the solubility of cellulose I is higher than that of cellulose II. This has the consequence that the dissolution of MCC (cellulose I) may create a supersaturated solution with respect to cellulose II. As for the dissolution state of cellulose, we identify three different regimes. (i) In the stable regime, corresponding to concentrations below the solubility of cellulose II, cellulose is molecularly dissolved and the solutions are thermodynamically stable. (ii) In the metastable regime, corresponding to lower supersaturations with respect to cellulose II, a minor aggregation of cellulose occurs and the solutions are kinetically stable. (iii) In the unstable regime, corresponding to larger supersaturations, there is macroscopic precipitation of cellulose II from solution. Finally, we also discuss strong alkali solvents in general and compare TBAH(aq) with the classical NaOH(aq) solvent.

scholarly journals Molecular simulation of surface reorganization and wetting in crystalline cellulose I and II

Cellulose ◽  
2013 ◽  
Vol 20 (1) ◽  
pp. 25-42 ◽  
Author(s):  
Reinhard J. Maurer ◽  
Alexander F. Sax ◽  
Volker Ribitsch
Keyword(s):  
Molecular Simulation ◽  
Crystalline Cellulose ◽  
Cellulose I
Sign in / Sign up

Export Citation Format

Share Document