Wood Protection in Europe: Developments Expected up to 2010

2008 ◽  
pp. 564-581 ◽  
Author(s):  
Hans Leithoff ◽  
Piet Blancquaer ◽  
Mark van der Flaas ◽  
Alex Valcke
Keyword(s):  
Wood Protection

scholarly journals Modification of Wood with Monoethanolamino-borate by The Data of X-Ray Photoelectron Spectroscopy

2018 ◽  
Vol 196 ◽  
pp. 04005
Author(s):  
Irina Stepina ◽  
Irina Kotlyarova
Keyword(s):  
Particle Size ◽  
Photoelectron Spectroscopy ◽  
Model Compound ◽  
Hydrolytic Stability ◽  
Photoelectron Spectra ◽  
Wood Cellulose ◽  
Rapid Loss ◽  
X Ray ◽  
Wood Protection ◽  
Cellulose Materials

The difficulty of wood protection from biocorrosion and fire is due to the fact that modifiers in use are washed out from the surface of the substrate under the influence of environmental factors. This results in a rapid loss of the protective effect and other practically important wood characteristics caused by the modification. To solve this problem is the aim of our work. Here, monoethanolaminoborate is used as a modifier, where electron-donating nitrogen atom provides a coordination number equal to four to a boron atom, which determines the hydrolytic stability of the compounds formed. Alpha-cellulose ground mechanically to a particle size of 1 mm at most was used as a model compound for the modification. X-ray photoelectron spectra were recorded on the XSAM-800 spectrometer (Kratos, UK). Prolonged extraction of the modified samples preceded the registration of the photoelectron spectra to exclude the fixation of the modifier molecules unreacted with cellulose. As a result of the experiment, boron and nitrogen atoms were found in the modified substrate, which indicated the hydrolytic stability of the bonds formed between the modifier molecules and the substrate. Therefore monoethanolaminoborate can be considered as a non-extractable modifier for wood-cellulose materials.

scholarly journals Bioinspired Living Coating System in Service: Evaluation of the Wood Protected with Biofinish during One-Year Natural Weathering

Coatings ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 701
Author(s):  
Faksawat Poohphajai ◽  
Jakub Sandak ◽  
Michael Sailer ◽  
Lauri Rautkari ◽  
Tiina Belt ◽  
...  
Keyword(s):  
Surface Roughness ◽  
Scots Pine ◽  
Critical Factor ◽  
Climatic Conditions ◽  
Natural Weathering ◽  
Surface Finishing ◽  
Attractive Alternative ◽  
Coating System ◽  
Self Healing ◽  
Wood Protection

The service life performance of timber products exposed to natural weathering is a critical factor limiting the broad use of wood as an external building element. The goal of this study was to investigate the in-service characterization of an innovative biofinish coating system. It is a novel surface finishing solution based on the bioinspired concept of living fungal cells designed for effective wood protection. The performance of Scots pine (Pinus sylvestris L.) wood coated with biofinish was compared with uncoated references. Samples were exposed to natural weathering for 12 months under the climatic conditions of northern Italy. The visual appearance, colour, gloss, wettability, and 3D surface topography of the wood surface were examined. Results revealed that the total colour changes (∆E) of biofinish-coated wood were negligible. Untreated Scots pine wood revealed the changes in colour after just three months of exposure. The gloss changes of both surface types were small. The contact angle measured on biofinish-coated wood was higher compared to that of uncoated Scots pine. Surface roughness increased in uncoated wood due to the erosion effect caused by the weathering progress. Conversely, the surface roughness of biofinish-coated samples decreased along the exposure time. This phenomenon was explained by two self-healing mechanisms: migration of non-polymerized oil to the cracked surface, where it polymerizes and creates a closed layer, and local regrowth to cover damaged spots by living fungal cells present in the coating. The obtained results revealed the superior aesthetic performance of the biofinish surface treatment against natural weathering. By considering the fully bio-based nature of the investigated coating, it was concluded that this solution can be an attractive alternative for state-of-the-art wood protection technologies.

Aboveground Field Performance of Douglas-Fir Heartwood Subjected to Combinations of Glycerol, Boron, and Thermal Modification

2021 ◽  
Vol 71 (1) ◽  
pp. 42-45
Author(s):  
Li Yan ◽  
Jed Cappallazzi ◽  
Jeffrey J. Morrell
Keyword(s):  
Field Performance ◽  
Decay Resistance ◽  
Douglas Fir ◽  
Thermal Modification ◽  
Site Conditions ◽  
Consistent Effect ◽  
Wood Protection ◽  
Copper Azole ◽  
Better Than

Abstract The effect of pretreatment with either boron or glycerol followed by thermal modification on the durability of Douglas-fir heartwood was evaluated in an American Wood Protection Association ground proximity test in Hilo, Hawaii. Non–thermally modified samples were generally more heavily decayed than any of the modified woods, but there was no consistent effect of different thermal modification conditions on decay resistance. Thermally modified woods tended to perform better than untreated timbers but not as well as copper azole–treated Douglas-fir heartwood lumber in test at the same site. The results are discussed in relation to how the extreme site conditions might have made it difficult for thermally modified materials to perform.

scholarly journals ANTIFUNGAL EFFECTS OF HINOKITIOL AND ITS SODIUM SALT FOR WOOD PROTECTION

BioResources ◽  
2012 ◽  
Vol 7 (4) ◽  
Author(s):  
Shujun Li ◽  
Camille M. Freitag ◽  
Jeffrey J. Morrell ◽  
Toshihiro Okabe
Keyword(s):  
Sodium Salt ◽  
Wood Protection ◽  
Antifungal Effects

scholarly journals IoT in housing and wood protection

2018 ◽  
Vol 44 (3) ◽  
pp. 208-209
Author(s):  
Hiroshi MATSUNAGA
Keyword(s):  
Wood Protection

scholarly journals Wood Productions and Renewable Materials: The Future Is Now

Forests ◽  
2020 ◽  
Vol 11 (6) ◽  
pp. 657
Author(s):  
Pierre Blanchet ◽  
Charles Breton
Keyword(s):  
Climate Change ◽  
Environmental Impact ◽  
Forest Products ◽  
Advanced Materials ◽  
Forest Sector ◽  
Special Edition ◽  
Renewable Materials ◽  
Wood Protection ◽  
The Future

The forest sector plays a key role in meeting the climate change challenge. Forest products and renewable materials are masterpieces in achieving this role. This editorial destails the benefits of these forest prodcuts and celebrates the contributions of the authors who submitted their work to this special edition of Forests journal. This edition presents 11 papers, which include the characterization of a new fiber supply, the description of advanced materials and their environmental impact, and an examination of structural products, wood protection, and modifications.

Sign in / Sign up

Export Citation Format

Share Document